IBEK 10 Watt DC-DC-Converter Family IPS10 www.ibek.ch Single & double outputs Input to output isolated * * * * * * * * * Ultra wide 1:4 input voltage ranges Shutdown input (optional) Very high efficiency, typical 84% High reliability Continuous no-load and short-circuit proof Extended ambient temperature range -40...+85C 2" x 2" x 0.41" case with industrial standard pinning Made in Switzerland, accordingly ISO 9001:2000 2 years warranty Standard Types 2 Electromagnetic emission EN 55022 < B Conducted and radiated emissions 24 IPS 48 IPS No load input current 15 10 mA typ. Input current in shutdown condition 3 mA typ. Switching frequency 400 kHz typ. Output voltage accuracy * 1% max. Static line regulation * 15 mV typ. Static load regulation FL to NL 0...50 mV typ. Output voltage noise 5 VDC 12 VDC 15 VDC outputs (20 MHz BW) 50 120 150 mVpp typ. Efficiency 84% typ. I/O Electric strength test voltage 1500 VDC Coupling capacitance 1000 pF Shutdown input (SD) Apply -0.3...+2 VDC to shut down (switch off) the output voltage(s). Normal operation with open pin. Ambient temperature range -T: -25...+71C; -S: -40...+85C 1 Case temperature range -T: -25...+95C; -S: -40...+105C Storage temperature range -T: -55...+105C; -S: -55...+105C Case material Metal with plastic bottom cover, UL94 V-0 rated MTBF, GB @ 40C case > 1.850.000 hours Single output xx IPS10-05-TB xx IPS10-12-TB xx IPS10-15-TB Double output 3 xx IPS10-0505-TB xx IPS10-1212-TB xx IPS10-1515-TB Input voltage VDC 10...33 (nominal 24) 35 V for 500 ms repetition rate 50 s 45 V for 10 ms repetition rate 10 s 18...75 (nominal 48) Output VDC mA 5 12 15 2000 833 667 5 12 15 1000 417 333 2 To complete type number replace "xx" by the required nominal input voltage, e.g. 24 IPS10-0505-TB. 3 Double outputs should have symmetrical load conditions to comply with the specifications listed on the left side. Extended temperature range -S is available for all types. Replace -T by -S on type number, e.g. 24 IPS10-0505-SB. Modifications and customs are available upon request. (MIL-HDBK-217F, Notice 2) 1 Power derating from 100% to 80% load for 71C to 85C Dimensions in mm (inches) Pin 1 2 3 4 5 64 4 Pin Configuration Single output +Vi -Gi +Vo No Pin -Go SD Double output +Vi -Gi +Vo Go -Vo SD Optional shutdown pin. If required replace B by F on type number, e.g. 24 IPS10-05-TF. Specifications subject to change without notice 20.07.2004 More power with IBEK ! Page 28.1