D1106030000000XX00 - VISHAY

Document Number: 20038 For technical questions, contact: thickfilmchip@vishay.com www.vishay.com

Revision: 29-Oct-10 227

D AP, CRCW-AP

Vishay Draloric

Thick Film, Rectangular Chip Resistors

for Conductive Gluing

FEATURES

•AgPd-Terminations for conductive gluing

•Stability ΔR/R = 1 % for 1000 h at 70 °C

•Metal glaze on high quality ceramic

•Compliant to RoHS directive 2002/95/EC

•Halogen-free according to IEC 61249-2-21

definition

Notes

•These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over

operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional time.

•Marking and packaging: See datasheet "Surface Mount Resistor Marking" (document number 20020)

•Power rating depends on the max. temperature at the joint point, the component placement density and the substrate material.

Note

(1) The power dissipation on the resistors generates a temperature rise against the local ambient, depending on the heat flow support of the

printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceed.

STANDARD ELECTRICAL SPECIFICATIONS

MODEL

SIZE RATED

DISSIPATION

P70

LIMITING

ELEMENT

VOLTAGE

Umax. AC/DC

TEMPERATURE

COEFFICIENT

ppm/K

TOLERANCE

RESISTANCE

RANGE

SERIES

INCH METRIC

D10 AP 0402 RR 1005M 0.063 50 ± 100

± 200

± 1

± 5

100R to 10M

10R to 10M

E24; E96

E24

Zero-Ohm-Resistor: Rmax. < 200 mΩ, Imax. = 0.5 A

D11 AP 0603 RR 1608M 0.10 75 ± 100

± 200

± 1

± 5

18R to 10M

3R6 to 10M

E24; E96

E24

Zero-Ohm-Resistor: Rmax. < 200 mΩ, Imax. = 0.7 A

D12 AP 0805 RR 2012M 0.125 150 ± 100

± 200

± 1

± 5

18R to 10M

3R6 to 10M

E24; E96

E24

Zero-Ohm-Resistor: Rmax. < 200 mΩ, Imax. = 0.8 A

D25 AP 1206 RR 3216M 0.25 200 ± 100

± 200

± 1

± 5

18R to 10M

3R6 to 10M

E24; E96

E24

Zero-Ohm-Resistor: Rmax. < 200 mΩ, Imax. = 1.0 A

CRCW1210-AP 1210 RR 3225M 0.50 200 ± 100

± 200

± 1

± 5

18R to 10M

3R6 to 10M

E24; E96

E24

Zero-Ohm-Resistor: Rmax. < 200 mΩ, Imax. = 1.5 A

CRCW1218-AP 1218 RR 3246M 1.0 200 ± 100

± 200

± 1

± 5

18R to 2M2

3R6 to 2M2

E24; E96

E24

Zero-Ohm-Resistor: Rmax. < 200 mΩ, Imax. = 2.0 A

CRCW2010-AP 2010 RR 5025M 0.75 400 ± 100

± 200

± 1

± 5

18R to 10M

3R6 to 10M

E24; E96

E24

Zero-Ohm-Resistor: Rmax. < 200 mΩ, Imax. = 1.8 A

CRCW2512-AP 2512 RR 6332M 1.0 500 ± 100

± 200

± 1

± 5

18R to 10M

3R6 to 10M

E24; E96

E24

Zero-Ohm-Resistor: Rmax. < 200 mΩ, Imax. = 2.0 A

TECHNICAL SPECIFICATIONS

PARAMETER UNIT D10 AP D11 AP D12 AP D25 AP CRCW1210-AP CRCW1218-AP CRCW2010-AP CRCW2512-AP

Rated dissipation P70 (1) W 0.063 0.1 0.125 0.25 0.5 1.0 0.75 1.0

Limiting element voltage

Umax. AC/DC V 50 75 150 200 200 200 400 500

Insulation voltage

Uins. (1 min) V > 75 > 100 > 200 > 300 > 300 > 300 > 300 > 300

Insulation resistance Ω> 109

Category temperature

range

C - 55 to + 155

Failure rate h-1 < 0.1 x 10- 9

Weight mg 0.65 2 5.5 10 16 29.5 25.5 40.5

www.vishay.com For technical questions, contact: thickfilmchip@vishay.com Document Number: 20038

228 Revision: 29-Oct-10

D AP, CRCW-AP

Vishay Draloric Thick Film, Rectangular Chip Resistors

for Conductive Gluing

Notes

(1) Preferred way for ordering products is by use of the PART NUMBER.

(2) Detailed BV number will appear on the packaging label.

PART NUMBER AND PRODUCT DESCRIPTION (Equal to or smaller than 1206 case size)

Part Numbering: D1208058B5620FP5 (1)

MODEL/SIZE SPECIAL CHARACTER TCR VALUE TOLERANCE PA C K AG I N G SPECIAL

D100402

D110603

D120805

D251206

8 = AgPd terminations

for conductive glueing

B = ± 100 ppm/K

A = ± 200 ppm/K

0 = Jumper

3 digit value

1 digit multiplier

MULTIPLIER

7 = *10-3

8 = *10-2

9 = *10-1

0 = *100

1 = *101

2 = *102

3 = *103

4 = *104

5 = *105

6 = *106

0000 = Jumper

F = ± 1 %

J = ± 5 %

0 = Jumper

Up to 2 digits

Product Description: D12 AP 100 562R 1 % P5

D12 AP 100 562R 1 % P5 BVxxxxx

MODEL TCR RESISTANCE VALUE TOLERANCE

PA C K AG I N G

SPECIAL (2)

D10 AP

D11 AP

D12 AP

D25 AP

± 100 ppm/K

± 200 ppm/K

49K9 = 49.9 Ω

5R1 = 5.1 kΩ

0R0 = Jumper

± 1 %

± 5 % P0

Customized

part number is

available on

request

PART NUMBER AND PRODUCT DESCRIPTION (Equal to or larger than 1210 case size)

Part Numbering: CRCW2010562RFKB4AP (1)

MODEL/SIZE SPECIAL CHARACTER TOLERANCE TCR PA CK A G I N G SPECIAL

CRCW1210

CRCW1218

CRCW2010

CRCW2512

R = Decimal

K = Thousand

M = Million

0000 = Jumper

F = ± 1.0 %

J = ± 5.0 %

Z = Jumper

K = ± 100 ppm/K

N = ± 200 ppm/K

0 = Jumper

Up to 2 digits

AP = Conductive gluing

Product Description: CRCW2010-AP 100 562R 1 % B4

CRCW2010-AP 200 562R 5 % B4 BVxxxxx

MODEL TCR RESISTANCE VALUE TOLERANCE PACKAGING SPECIAL (2)

CRCW1210-AP

CRCW1218-AP

CRCW2010-AP

CRCW2512-AP

± 100 ppm/K

± 200 ppm/K

10R = 10 Ω

562R = 562 Ω

10K = 10 kΩ

1M = 1 MΩ

0R0 = Jumper

± 1 %

± 5 %

B4 Customized

part number is

available on

request

5PF0265B8508021D

PA4BKFR2650102WCRC

Document Number: 20038 For technical questions, contact: thickfilmchip@vishay.com www.vishay.com

Revision: 29-Oct-10 229

D AP, CRCW-AP

Thick Film, Rectangular Chip Resistors

for Conductive Gluing Vishay Draloric

Note

(4) Flame treated paper for sizes D10 and D11. Regular paper for sizes D12 and D25.

DIMENSIONS

PACKAGING

MODEL UNIT

PAPER TAPE

ACC. IEC 60286-3, TYPE I (4)

BLISTER TAPE

ACC. IEC 60286-3, TYPE II

QUANTITY CODE QUANTITY CODE

D10 AP 180 mm/7" 10 000 P0

330 mm/13" 50 000 PZ

D11 AP

180 mm/7" 5000 P5 5000 B5

285 mm/11.25" 10 000 P0

330 mm/13" 20 000 PN 20 000 BN

D12 AP

180 mm/7" 5000 P5 5000 B5

285 mm/11.25" 10 000 P0

330 mm/13" 20 000 PN 20 000 BN

D25 AP

180 mm/7" 5000 P5 5000 B5

285 mm/11.25" 10 000 P0

330 mm/13" 20 000 PN 15 000 BN

CRCW1210-AP

180 mm/7" 5000 P5

285 mm/11.25" 10 000 P0

330 mm/13" 20 000 PN

CRCW1218-AP 180 mm/7" 4000 B4

CRCW2010-AP 180 mm/7" 4000 B4

CRCW2512-AP 180 mm/7" 2000 B2

4000 B4

SIZE DIMENSIONS in millimeters GLUING PADS DIMENSIONS in millimeters

INCH METRIC L W H T1 T2 a b l

0402 1005 1.0 ± 0.05 0.5 ± 0.05 0.35 ± 0.05 0.25 ± 0.05 0.2 + 0.10

- 0.15 0.4 0.6 0.5

0603 1608 1.55 + 0.10

- 0.05 0.85 ± 0.1 0.45 ± 0.05 0.3 ± 0.2 0.3 ± 0.2 0.9 0.9 1.0

0805 2012 2.0 + 0.20

- 0.10 1.25 ± 0.15 0.45 ± 0.05 0.3 + 0.20

- 0.10 0.3 ± 0.2 0.9 1.3 1.3

1206 3216 3.2 + 0.10

- 0.20 1.6 ± 0.15 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2 1.1 1.7 2.3

1210 3225 3.2 ± 0.2 2.5 ± 0.2 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2 0.9 2.5 2.0

1218 3246 3.2 + 0.10

- 0.20 4.6 ± 0.15 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2 1.05 4.9 1.9

2010 5025 5.0 ± 0.15 2.5 ± 0.15 0.6 ± 0.1 0.6 ± 0.2 0.6 ± 0.2 1.0 2.5 3.9

2512 6332 6.3 ± 0.2 3.15 ± 0.15 0.6 ± 0.1 0.6 ± 0.2 0.6 ± 0.2 1.0 3.2 5.2

www.vishay.com For technical questions, contact: thickfilmchip@vishay.com Document Number: 20038

230 Revision: 29-Oct-10

D AP, CRCW-AP

Vishay Draloric Thick Film, Rectangular Chip Resistors

for Conductive Gluing

FUNCTIONAL PERFORMANCE

1000

100

0.1

0.01

Single Pulse

Pulse Load max. (W)

2512

1218

2010

1210

1206

0805

0603

0402

-6

Pulse Duration

(s)

-5

-4

-3

-2

-1

1 10 100

Maximum pulse load, single pulse; applicable if P 0 and n < 1000 and Û ≤ Ûmax.;

for permissible resistance change equivalent to 8000 h operation

1000

0.1

0.01

-6

Continuous Pulse

Maximum pulse load, continuous pulses; applicable if P ≤ P (ϑamb) and Û ≤ Ûmax.;

for permissible resistance change equivalent to 8000 h operation

Pulse Duration i (s)

Continuous Pulse Load

max.

(W)

100

-5

-4

-3

-2

-1

1 10 100

2512

1218

2010

1210

1206

0805

0603

0402

2000

200

10- 6 10- 5 10- 4 10- 3 10- 2 10- 1 110

Pulse Voltage

Maximum pulse voltage, single and continuous pulses; applicable if

P ≤ Pmax.; for permissible resistance change equivalent to 8000 h operation

Pulse Duration i (s)

400

600

800

1000

1200

1400

1600

1800

Pulse Voltage

max.

(V)

2512

2010

1206/1210/1218

0805 0603

0402

Document Number: 20038 For technical questions, contact: thickfilmchip@vishay.com www.vishay.com

Revision: 29-Oct-10 231

D AP, CRCW-AP

Thick Film, Rectangular Chip Resistors

for Conductive Gluing Vishay Draloric

- 55 - 25 0 25 50 75 100 125 155 175

120

100

Derating

Ambient Temperature in °C

Fraction of Rated Dissipation in %

120

Resistance Value R in Ω

Attenuation of 3rd Harmonic A3 in dB

Non-Linearity

100

0100 1K 10K 100K 1M 10M

1206, 2010

0805

0603

0402

100 1K 10K 100K 1M 10M

100

0.1

0.01

Current Noise A1 in µV/V

Current Noise

2010

1206

0805

0603

0402

Resistance Value R in Ω

www.vishay.com For technical questions, contact: thickfilmchip@vishay.com Document Number: 20038

232 Revision: 29-Oct-10

D AP, CRCW-AP

Vishay Draloric Thick Film, Rectangular Chip Resistors

for Conductive Gluing

All tests are carried out in accordance with the following specifications:

•EN 60115-1, generic specification

•EN 140400, sectional specification

•EN 140401-802, detail specification

•IEC 60068-2, environmental test procedures

Packaging of components is done in paper or blister tapes according to IEC 60286-3.

TEST PROCEDURES AND REQUIREMENTS

60115-1

CLAUSE

IEC

60068-2

TEST

METHOD

TEST PROCEDURE

REQUIREMENTS

PERMISSIBLE CHANGE (ΔR)

STABILITY CLASS 2 OR BETTER

Stability for product types:

D AP, CRCW-AP 18 Ωto 10 MΩ3.6 Ωto 10 MΩ

4.5 - Resistance - ± 1 % ± 5 %

4.13 - Short time overload

U= 2.5 x

≤ 2 x Umax.;

duration: Acc. to style

± (0.25 % R + 0.05 Ω)

4.8.4.2 - Temperature

coefficient

(20/- 55/20) °C and

(20/125/20) °C± 100 ppm/K ± 200 ppm/K

4.19 14 (Na) Rapid change of

temperature

30 min. at - 55 °C;

30 min. at 125 °C

5 cycles ± (0.25 % R + 0.05 Ω)

1000 cycles ± (1 % R + 0.05 Ω)

4.25.1 - Endurance

at 70 °C

U= ≤ Umax.;

1.5 h on; 0.5 h off;

70 °C; 1000 h ± (1 % R + 0.05 Ω)± (2 % R + 0.1 Ω)

70 °C; 8000 h ± (2 % R + 0.1 Ω)± (4 % R + 0.1 Ω)

4.24 78 (Cab) Damp heat,

steady state

(40 ± 2) °C;

(93 ± 3) % RH;

56 days

± (1 % R + 0.05 Ω)

4.25.3 -

Endurance at

upper category

temperature

155 °C, 1000 h ± (1 % R + 0.05 Ω)

P70 x R

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 02-Oct-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.