TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http:/ /www.microsemi.com
RF01002 Rev B, November 2011 High Reliability Product Group Page 1 of 4
DEVICES
MSMCJLCE6.5A thru MSMCJLCE170A, e3
and MSMCGLCE6.5A thru MSMCGLCE170A, e3
LEVELS
M, MA, MX, MXL
FEATURES
High reliability controlled devices with fabrication and assembly lot traceability
100% surge tested devices
Low capacitance of 100 pF or less
Optional upscreening available by replacing the M prefix with MA, MX or MXL. These prefixes
specify various screening and conformance inspection options based on MIL-PRF-19500. Refer
to MicroNote 129 for more de tails on the screeni ng opti ons.
Axial-lead equivalent packages for thru-hole mo unti ng available as MLCE6.5A to MLCE170CA
Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B
RoHS compliant devices available by adding an “e3” suffix
3σ lot norm screening performed on Standby Current I
D
APPLICATIONS / BEN EFIT S
1500 Watts of Peak Pulse Power at 10/1000 µs
Low capac itan ce for data line pr ote ctio n to 1 MH z
Protection for aircraft fast data rate lines up to Level 5 Waveform 4 and Level 2 Waveform 5A in
RTCA/DO-160D (also see MicroNote 130) & ARINC 429 with bit rates of 100 kb/s (per ARINC
429, Part 1, par 2.4.1.1)
IEC 61000-4-2 ESD 15 kV (air), 8 kV (contact)
IEC 61000-4-5 (lightning) as further detailed in MLCE6.5 thru MLCE170A data sheet
T1/E1 Line Cards
Base Stations, WAN & XDSL Interfaces
CSU/DSU Equipment
MAXIMUM RATINGS
Peak Pulse Power dissipation at 25 ºC: 1500 watts at 10/1000 μs (also see Figures 1,2, and 3)
with impulse repetition rate (duty factor) of 0.01 % or less
Clamping Fact or: 1.40 @ Ful l Rat ed pow er :
1.30 @ 50 % Rated power
tclamping (0 V to VBR min): Less than 5x10-9
Operating and Storage temperatures: -65 ºC to +150 ºC
seconds
Steady State power dissipation: 5.0W @ TL = 50 º C
Thermal Resistance: 20 ºC /W (typical junction to lead (tab) at mounting plane
When pulse testing, do not pulse in opposite direction. (See “Schematic Applications” section
herein and Figures 5 & 6 for further protection in both directions)
Solder temperatures: 260 ºC for 10 s (maximum)
SURFACE MOUNT
1500 Watt Low Capacitance
Transient Voltage Suppressor
- High Reliability controlled devices
- Unidirectional (A) construction
- Available in both J-bend and Gull-wing terminations
- Selection s for 6.5 to 170 V standoff voltages (V
WM
)
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
________________________________________________________________________________________________________________________________
RF01002 Rev B, November 2011 High Reliability Product Group Page 2 of 4
MECHANICAL AND PACKAGING
Void-free transfer molded thermosetting epoxy body meeting UL94V-0
Gull-wing or J-bend tin-lead (90 % Sn, 10 % Pb) or RoHS (100 % Sn) compliant annealed matte-tin plating
solderable per MIL-STD-750, method 2026
Cathode indicated by band. No cathode band on bi-directional devices.
Part number marked on package
Available in bulk or custom tape-and-reel packaging
TAPE-AND-REEL option available with up to 750 per 7 inch reel or up to 2500 per 13 inch reel EIA-481-B with 16
mm tape. Add “TR” suffix to part number.
Weight: 0.25 gr am (approximately)
PACKAGE DIMENSIONS
PAD LAYOUT
DIMENSIONS IN I NCHE S
A
B
C
D
E
L
MIN
.115
.260
.220
.305
.077
.030
MAX
.121
.280
.245
.320
.104
.060
DIMENSIONS IN MILLIMETERS
MIN
2.92
6.60
5.59
7.75
1.95
.760
MAX
3.07
7.11
6.22
8.13
2.65
1.520
Typical Standoff Height: 0.004” – 0.008” (0.1mm – 0.2mm)
INCHES
mm
A
0.390 9.90
B
0.110
2.79
C
0.150
3.81
INCHES
mm
A
0.510
12.95
B
0.110 2.79
C
0.150
3.81
SYMBOLS & DE FINITIONS
Symbol
Definition
Symbol
Definition
VWM
Working Peak (Standoff) Voltage
IPP
Peak Pulse Current
PPP
Peak Pulse Power
V
Clamping Voltage
C
V
Breakdown Voltage
BR
I
Breakdown Current for V
BR
BR
ID
Standby Current
(DO-214AB) (DO-215AB)
(SMCJ) (SMCG)
SMCJ (DO-214AB)
SMCG (DO-215AB)
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
________________________________________________________________________________________________________________________________
RF01002 Rev B, November 2011 High Reliability Product Group Page 3 of 4
ELECTRICAL CHARACTERISTICS @ 25oC
MICROSEMI
PART NUMBER
Reverse
Stand-Off
Voltage
V
WM
Breakdown Voltage
VBR @ I
BR
Maximum
Reverse
Leakage
ID @ V
WM
Maximum
Clamping
Voltage
VC @ I
PP
Maximum
Peak Pulse
Current I
@10/1000
PP
Maximum
Capacitance
@ 0 Volts,
f = 1 MHz
Working
Inverse
Blocking
Voltage
V
WIB
Inverse
Blocking
Leakage
Current
I
IB
Peak
Inverse
Blocking
Voltage
V
PIB
GULL-WING J-BEND V VMIN VmA
MAX
µ
A V A pF V
µ
A V
MSMCGLCE6.5A
MSMCGLCE7.0A
MSMCJLCE6.5A
MSMCJLCE7.0A
6.5
7.0
7.22
7.78
7.98
8.60
10
10
1000
500
11.2
12.0
100
100
100
100
75
75
10
10
100
100
MSMCGLCE7.5A
MSMCGLCE8.0A MSMCJLCE7.5A
MSMCJLCE8.0A 7.5
8.0 8.33
8.89 10.2
9.83 10
1 250
100 14.3
13.6 100
100 100
100 75
75 10
10 100
100
MSMCGLCE8.5A
MSMCGLCE9.0A
MSMCJLCE8.5A
MSMCJLCE9.0A
8.5
9.0
9.44
10.0
10.4
11.1
1
1
50
10
14.4
15.4
100
97
100
100
75
75
10
10
100
100
MSMCGLCE10A
MSMCGLCE11A
MSMCJLCE10A
MSMCJLCE11A
10
11
11.1
12.2
12.3
13.5
1
1
5
5
17.0
18.2
88
82
100
100
75
75
10
10
100
100
MSMCGLCE12A
MSMCGLCE13A
MSMCJLCE12A
MSMCJLCE13A
12
13
13.3
14.4
14.7
15.9
1
1
5
5
19.9
21.5
75
70
100
100
75
75
10
10
100
100
MSMCGLCE14A
MSMCGLCE15A MSMCJLCE14A
MSMCJLCE15A 14
15 15.6
16.7 17.2
18.5 1
1 5
5 23.2
24.4 65
61 100
100 75
75 10
10 100
100
MSMCGLCE16A
MSMCGLCE17A MSMCJLCE16A
MSMCJLCE17A 16
17 17.8
18.9 19.7
20.9 1
1 5
5 26.0
27.6 57
54 100
100 75
75 10
10 100
100
MSMCGLCE18A
MSMCGLCE20A
MSMCJLCE18A
MSMCJLCE20A
18
20
20.0
22.2
22.1
24.5
1
1
5
5
29.2
32.4
51
46
100
100
75
75
10
10
100
100
MSMCGLCE22A
MSMCGLCE24A
MSMCJLCE22A
MSMCJLCE24A
22
24
24.4
26.7
26.9
29.5
1
1
5
5
35.5
38.9
42
39
100
100
75
75
10
10
100
100
MSMCGLCE26A
MSMCGLCE28A
MSMCJLCE26A
MSMCJLCE28A
26
28
28.9
31.1
31.9
34.4
1
1
5
5
42.1
45.5
36
33
100
100
75
75
10
10
100
100
MSMCGLCE30A
MSMCGLCE33A
MSMCJLCE30A
MSMCJLCE33A
30
33
33.3
36.7
36.8
40.6
1
1
5
5
48.4
53.3
31
28.1
100
100
75
75
10
10
100
100
MSMCGLCE36A
MSMCGLCE40A
MSMCJLCE36A
MSMCJLCE40A
36
40
40.0
44.4
44.2
49.1
1
1
5
5
58.1
64.5
25.8
23.3
100
100
75
75
10
10
100
100
MSMCGLCE43A
MSMCGLCE45A
MSMCJLCE43A
MSMCJLCE45A
43
45
47.8
50.0
52.8
55.3
1
1
5
5
69.4
72.7
21.6
20.6
100
100
150
150
10
10
200
200
MSMCGLCE48A
MSMCGLCE51A MSMCJLCE48A
MSMCJLCE51A 48
51 53.3
56.7 58.9
62.7 1
1 5
5 77.4
82.4 19.4
18.2 100
100 150
150 10
10 200
200
MSMCGLCE54A
MSMCGLCE58A MSMCJLCE54A
MSMCJLCE58A 54
58 60.0
64.4 66.3
71.2 1
1 5
5 87.1
93.6 17.2
16.0 100
100 150
150 10
10 200
200
MSMCGLCE60A
MSMCGLCE64A
MSMCJLCE60A
MSMCJLCE64A
60
64
66.7
71.1
73.7
78.6
1
1
5
5
96.8
103
15.5
14.6
90
90
150
150
10
10
200
200
MSMCGLCE70A
MSMCGLCE75A
MSMCJLCE70A
MSMCJLCE75A
70
75
77.8
83.3
85.0
92.1
1
1
5
5
113
121
13.3
12.4
90
90
150
150
10
10
200
200
MSMCGLCE80A
MSMCGLCE90A MSMCJLCE80A
MSMCJLCE90A 80
90 88.7
100 98.0
111 1
1 5
5 129
146 11.6
10.3 90
90 150
300 10
10 200
200
MSMCGLCE100A
MSMCGLCE110A MSMCJLCE100A
MSMCJLCE110A 100
110 111
122 123
135 1
1 5
5 162
178 9.3
8.4 90
90 300
300 10
10 200
400
MSMCGLCE120A
MSMCGLCE130A
MSMCJLCE120A
MSMCJLCE130A
120
130
133
144
147
159
1
1
5
5
193
209
7.8
7.2
90
90
300
300
10
10
400
400
MSMCGLCE150A
MSMCGLCE160A
MSMCJLCE150A
MSMCJLCE160A
150
160
167
178
185
197
1
1
5
5
243
259
6.2
5.8
90
90
300
300
10
10
400
400
MSMCGLCE170A
MSMCJLCE170A
170
189
209
1
5
275
5.4
90
300
10
400
NOTE 1:
TVS are normally selected according to the reverse “Stand Off Voltage” (VWM) which should be equal to or greater
than the dc or continuous peak operating volt age l evel.
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
________________________________________________________________________________________________________________________________
RF01002 Rev B, November 2011 High Reliability Product Group Page 4 of 4
GRAPHS
tp – Pulse Time – sec Test wave form parameters T – Temperature – º
tr = 10 µs, tp = 1000 µs C
FIGURE 1 P eak Pulse P ower vs. P uls e Time FIGURE 2 Pulse Waveform FIGURE 3 Derating curve
SCHEMATIC APPLICATIONS
The TVS low capacit ance device confi guration is shown in Figure 4. As a furt her option for unidirect ional applic ations, an additional
low capacitance rectifier diode may be used in parallel in the same polarity direction as the TVS as shown in Figure 5. In
applications where random high voltage transients occur, this will prevent reverse transients from damaging the internal low
capacitanc e rectifier diode and al so provide a low voltage c onducting direction. The added rec tifier diode should be of s imi lar low
capacitance and also have a higher reverse voltage rating than the TVS clamping voltage VC
. The Microsemi recommended
rectifier part number f or the application in Figure 5 i s the “SMBJLCR80” or “SMBGLCR80” dependin g on the terminal c onfiguration
desired. I f using two (2) lo w capacit ance TVS devices in ant i-parallel for bidi rectional appl ications, this added protect ive feature for
both direct ions (including the reverse of each rect ifier diode) is inherently provided in Figure 6. The unidi rectional and bidirectional
configurat i ons in Figure 5 and 6 will both result in twice the capacitance of Figure 4.
FIGURE 4 FIGURE 5 FIGURE 6
TVS with internal low Optional Unidirectional Optional Bidirectional
capacitance rectif i er diode configuration (TVS and confi gurat i on (two TVS
separate rect i fier di ode devices in anti-parallel)
in parallel)
PPP
– Peak Pulse Power – kW
Peak Pulse Power (PPP) or Current (IPP)
in percent of 25oC rating