05/2007
177
R.41
Y2 / X1 CLASS (IEC 60384-14) MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
Typical applications
failure of the capacitor could lead to danger of electric shock.
R41
Note: R.41 series has replaced the R73 series (available
use of the R.41 series.
GENERAL TECHNICAL DATA
Dielectric:
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads:
Protection:
UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic
code, approvals, manufacturing plant.
Climatic category: 40/110/56 IEC 60068-1
Operating temperature range:
Related documents: IEC 60384-14, EN 60384-14.
ELECTRICAL CHARACTERISTICS
Rated voltage (VR):
Capacitance range: 1000pF to 1.0µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±±20% (M).
Dissipation factor (DF):
tgδ x 10-4± 30 (20)* at 1kHz
* Typical value
Insulation resistance:
Test conditions
±5°C
Performance
1 x 105 MΩ (5 x 105 MΩ )* for C 0.33µF
30000 s (150000 s)* for C >0.33µF
* Typical value
Test voltage between terminations
±5°C
Ø
d ±0.05
p = 7.5 p = 10 p = 15 15<p27.5 p = 37.5
0.5 0.6 0.6 or 0.8* 0.8 1
* See size table.
All dimensions are in mm.
Loose Taped
Fig.1 Fig.2
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions
±2°C
±2%
Performance
Capacitance change |∆ 5%
50% of initial limit.
Endurance:
Test conditions
±2°C
R
Performance
Capacitance change |∆ 10%
50% of initial limit.
Resistance to soldering heat:
Test conditions
±5°C
±1 s
Performance
Capacitance change |∆ 2%
Pitch Box thickness (B) Maximum dimensions (mm)
(mm) (mm) B max H max L max
7.5 All
10.0 All
15.0 <7.5
15.0
22.5 All
27.5 All
37.5 All
05/2007 178
R.41
Y2 / X1 CLASS (IEC 60384-14) MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
Typical applications: Interference suppression and across-
failure of the capacitor could lead to danger of electric shock.
R41
Rated
Cap.
300 Vac/1000Vdc
Std dimensions
Ø dMax
dv/dt at
420Vdc
(V/ µs)
Part Number
B H L p
1000 pF 4.0 9.0 10.0 7.5 0.5 800 R413D 1100 - - 00 -
2200 pF 4.0 9.0 10.0 7.5 0.5 800 R413D 1220 - - 00 -
3300 pF 5.0 10.5 10.0 7.5 0.5 800 R413D 1330 - - 00 -
4700 pF 6.0 12.0 10.5 7.5 0.5 800 R413D 1470 - - 00 -
1000 pF 4.0 9.0 13.0 10.0 0.6 800 R413F 1100 - - 00 -
1500 pF 4.0 9.0 13.0 10.0 0.6 800 R413F 1150 - - 00 -
2200 pF 4.0 9.0 13.0 10.0 0.6 800 R413F 1220 - - 00 -
3300 pF 4.0 9.0 13.0 10.0 0.6 800 R413F 1330 - - M1 -
4700 pF 5.0 11.0 13.0 10.0 0.6 800 R413F 1470 - - M1 -
6800 pF 6.0 12.0 13.0 10.0 0.6 800 R413F 1680 - - 00 -
3300 pF 5.0 11.0 18.0 15.0 0.6 600 R413I 1330 - - 00 -
4700 pF 5.0 11.0 18.0 15.0 0.6 600 R413I 1470 - - 00 -
6800 pF 5.0 11.0 18.0 15.0 0.6 600 R413I 1680 - - 00 -
0.010 µF 5.0 11.0 18.0 15.0 0.6 600 R413I 2100 - - 00 -
0.015 µF 5.0 11.0 18.0 15.0 0.6 600 R413I 2150 - - M1 -
0.022 µF 6.0 12.0 18.0 15.0 0.6 600 R413I 2220 - - M1 -
0.033 µF 7.5 13.5 18.0 15.0 0.6 600 R413I 2330 - - M1 -
0.047 µF 8.5 14.5 18.0 15.0 0.6 600 R413I 2470 - - M1 -
0.068 µF 11.0 19.0 18.0 15.0 0.8 600 R413I 2680 - - 00 -
0.047 µF 6.0 15.0 26.5 22.5 0.8 500 R413N 2470 - - 00 -
0.068 µF 6.0 15.0 26.5 22.5 0.8 500 R413N 2680 - - M1M -
0.068 µF 7.0 16.0 26.5 22.5 0.8 500 R413N 2680 - - 00 -
0.10 µF 8.5 17.0 26.5 22.5 0.8 500 R413N 3100 - - M1 -
0.15 µF 10.0 18.5 26.5 22.5 0.8 500 R413N 3150 - - M1 -
0.22 µF 13.0 22.0 26.5 22.5 0.8 500 R413N 3220 - - 00
0.22 µF 13.0 22.0 32.0 27.5 0.8 400 R413R 3220 - - 00 -
0.33 µF 14.0 28.0 32.0 27.5 0.8 400 R413R 3330 - - 00 -
0.47 µF 18.0 33.0 32.0 27.5 0.8 400 R413R 3470 - - 00 -
0.68 µF 18.0 33.0 32.0 27.5 0.8 400 R413R 3680 - - 00 -
0.47 µF 13.0 24.0 41.5 37.5 1.0 300 R413W 3470 - - 00 -
0.68 µF 16.0 28.5 41.5 37.5 1.0 300 R413W 3680 - - 00 -
1.0 µF 20.0 40.0 41.5 37.5 1.0 300 R413W 4100 - - 00 -
All dimensions are in mm.
Mechanical version and packaging (Table1)
IN PROGRESS
APPROVALS
(*)
ENEC
IEC 60384-14 Class Y2 / X1 File No. V4160
(in progress for pitch 7.5 mm)
CSA C22.2 N°1
(250Vac) Across-the-line File No. LR83890
(in progress for pitch 7.5 mm)
UL 1283
(300 Vac 110°C)
Electromagnetic
Interference
Filters
File No. E85238
in progress
UL 1414 ,
Across-the-line File No. E 97797
(in progress for pitch 7.5 mm)
Class Y2 / X1
File
(in progress for pitch 7.5 mm)
Approved according to IEC 60384-14 (ex-former EN 132400)
According to IEC 60065.
Table 1
Standard
packaging style
Lead
length
(mm)
Taping style Ordering
code
(Digit 10 to 11)
P2
(mm)
Fig.
(No.)
Pitch
(mm)
6.35
12.70
19.05
1
1
2
7.5
10.0/15.0
22.5
REEL Ø 355mm
REEL Ø 500mm
REEL Ø 500mm
6.35
12.70
19.05
1
1
2
7.5
10.0/15.0
22.5/27.5
CK
CK
CK
Loose, short leads
Loose, long leads
(p<10mm)
Loose, long leads
(p=10mm)
Loose, long leads
(p15mm)
44
17
25 ±1
25
30
00
Z3
JY
50
40
version
