3.5x2.8mm SURFACE MOUNT LED LAMP Part Number: AA3528QBS/D-AMT Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description The Blue source color devices are made with InGaN Light Emitting Diode. Features Static electricity and surge damage the LEDS. z Industry standard PLCC-2 package. It is recommended to use a wrist band or anti-electrostatic z High reliability LED package. glove when handling the LEDs. z Wide viewing angle. All devices, equipment and machinery must be electrically z Single color. grounded. z Suitable for all SMT assembly and solder process. z Available on tape and reel. Applications z Ideal for backlighting. z Traffic signaling. z Package : 2000pcs / reel. z Backlighting (illuminated advertising , general lighting). z Moisture sensitivity level : level 3. z Interior and exterior automotive lighting. z RoHS compliant. z Substitution of micro incandescent lamps. z Reading lamps. z Signal and symbol luminaire for orientation. z Marker lights (e.g. Steps, exit ways, etc). z Decorative and entertainment lighting. z Indoor and outdoor commercial and residential Package Dimensions architectural lighting. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAL3987 REV NO: V.2A DATE: SEP/01/2012 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1201006709 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. 4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. 5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAL3987 REV NO: V.2A DATE: SEP/01/2012 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1201006709 Selection Guide Part No. Dice AA3528QBS/D-AMT Iv (mcd) [2] @ 20mA Lens Type Blue (InGaN) Water Clear Viewing Angle [1] Code. Min. Max. M 80 120 N 120 200 P 200 300 21/2 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at Ta=25C Parameter Symbol Value Unit PD 120 mW Junction temperature TJ 110 C Reverse Voltage VR 5 V Operating Temperature Top -40 To +100 C Storage Temperature Tstg -40 To +110 C IF 30 mA IFM 150 mA 250 V 250 C/W Power dissipation DC Forward Current[1] Peak Forward Current [2] Electrostatic Discharge Threshold (HBM) Thermal Resistance (Junction/ambient) [1] Rth j-a Notes: 1. Rth(j-a) Results from mounting on PC board FR4 (pad size16 mm 2 per pad), 2. 1/10 Duty Cycle, 0.1ms Pulse Width. Electrical / Optical Characteristics at Ta=25C Parameter Symbol Wavelength at peak emission Dominant Wavelength IF=20mA IF=20mA Reverse Current (VR = 5V) Spectral bandwidth at 50% Forward Voltage REL MAX Value Code. Min. peak dom [1] Typ. 468 *460 461 468 2A 464 471 2B 467 473 3A 469 475 3B 471 477 IF=20mA 50 25 VF [2] - 3.3 Unit nm 1B IR IF=20mA Max. nm uA nm 4.0 V Temperature coefficient of peak IF=20mA, -10 C T100 C TC peak 0.05 nm/ C Temperature coefficient of dom IF=20mA, -10 C T100 C TC dom 0.03 nm/ C Temperature coefficient of VF IF=20mA, -10 C T100 C TCV -2.5 mV/ C Notes: 1.The dominant Wavelength ( d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward Voltage: +/-0.1V. * Wavelength value is traceable to the CIE127-2007 compliant national standards. SPEC NO: DSAL3987 REV NO: V.2A DATE: SEP/01/2012 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1201006709 Blue AA3528QBS/D-AMT SPEC NO: DSAL3987 REV NO: V.2A DATE: SEP/01/2012 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1201006709 AA3528QBS/D-AMT Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) Reel Dimension SPEC NO: DSAL3987 REV NO: V.2A DATE: SEP/01/2012 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1201006709 PACKING & LABEL SPECIFICATIONS AA3528QBS/D-AMT SPEC NO: DSAL3987 REV NO: V.2A DATE: SEP/01/2012 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1201006709 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below Lot Tolerance Percent Defective (LTPD) : 10% No. Test Item Standards Test Times / Number of Cycles Damaged Test Condition 1 Continuous operating test - Ta =25C ,IF = maximum rated current* 1,000 h 0 / 22 2 High Temp. operating test EIAJED4701/100(101) Ta = 100C IF = maximum rated current* 1,000 h 0 / 22 3 Low Temp. operating test - Ta = -40C, IF = maximum rated current* 1,000 h 0 / 22 4 High temp. storage test EIAJEDTa = maximum rated storage temperature 4701/100(201) 1,000 h 0 / 22 5 Low temp. storage test EIAJED4701/100(202) Ta = -40C 1,000 h 0 / 22 6 High temp. & humidity storage test - Ta = 60C, RH = 90% 500 h 0 / 22 7 High temp. & humidity operating test - Ta = 60C, RH = 90% IF = maximum rated current* 500 h 0 / 22 8 Soldering reliability test EIAJED4701/100(301) Moisture soak : 30C,70% RH, 72h Preheat : 150~180C(120s max.) Soldering temp : 260C(10s) 2 times 0 / 18 9 Thermal shock operating test - Ta = -40C(15min) ~ 100C(15min) IF = derated current at 100C 1,000 cycles 0 / 22 10 Thermal shock test - Ta = -40C(15min) ~ maximum rated storage temperature(15min) 1,000 cycles 0 / 22 11 Electric Static Discharge (ESD) EIAJED4701/100(304) C = 100pF , R2 = 1.5K V = 250V Once each Polarity 0 / 22 12 Vibration test - a = 196m/s , f = 100~2KHz , t = 48min for all xyz axes 4 times 0 / 22 * : Refer to forward current vs. derating curve diagram Failure Criteria Items Symbols Conditions Failure Criteria luminous Intensity lv IF = 20mA Testing Min. Value <Spec.Min.Value x 0.5 Forward Voltage VF IF = 20mA Testing Max. Value Spec.Max.Value x 1.2 Reverse Current IR VR = Maximum Rated Reverse Voltage Testing Max. Value Spec.Max.Value x 2.5 High temp. storage test - - Occurrence of notable decoloration, deformation and cracking SPEC NO: DSAL3987 REV NO: V.2A DATE: SEP/01/2012 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1201006709