62GB
-
Series
Miniature Bayonet Lock Connectors
Designed to meet MIL-C-26482
Amphenol
62GB and
Pattern 608
New Planforms
Current:
(a) Maximum current per individual contact (in isolation)* at ambient
temperature of 85°C
Contact size 12: 23 A
(b) Maximum current per contact through all contacts simultaneously at
an ambient temperature of 85°C
Contact size 12: 20 A
Current:
(a) Maximum current per individual
contact (in isolation)* at ambient
temperature of 85°C
Contact size 8: 45 A
(b) Maximum current per contact
through all contacts simultaneously
at an ambient temperature of 85°C
Contact size 8: 40 A
Sea level 8500m (27,900ft) 21,340m (70,OOOft)
1013 mbar
320 mbar 44 mbar
Voltage rating I II III I II III I II III
Working voltages ** 700 1200 1500 550 650 800 330 380 450
(nominal)
d.c. or a.c. peak
Voltage proof 2100 3000 3000 1100 1300 1300 660 760 750
d.c. or a.c. peak
* i.e. when only one contact per connector is electrically loaded.
1 mbar=10
2
N/m
2
=100 Pa
** Establishment of electrical safety factors is the responsibility of the user
CONTENTS
Page
Amphenol 62GB Solder Connectors 1
Schedule of Tests 2-3
Connector Styles Available 4-5
Insert Availability 6-7
Ordering 62GB Series Connectors 8-9
Box Mounting Receptacles - Table of Styles 10-11
Box Mounting Receptacles 12-16
Single Hole Fixing Receptacles - Table of Styles 17-19
Single Hole Fixing Receptacles 20-27
Cable Mounting Receptacles - Table of Styles 28
Cable Mounting Receptacles 29-31
Plugs - Table of Styles 32-33
Plugs 34-39
Accessories - Table of Styles 40-41
Accessories 42-48
Cable Accessories - Table of Styles 49-50
Cable Accessories 51-55
Insert Orientations 56
Key/Keyway Orientations 57
Assembly Instructions 58-61
Wire Stripping 62
Torque Details 62
Amphenol ® 62GB
solder connectors
This miniature bayonet lock connector series offers
designers important features not found in any other range
of connectors.
62GB Series connectors – compliant to the United States
Military Specification MIL-C-26482E on certificate No.
1713. They are the first and only British connectors to
have achieved this. A doubly strong position which
Amphenol are well geared to handle. The manufacturing
facilities of the Whitstable plant have been cited as
exemplary in Europe. Certainly the layout is extensive and
extremely efficient.
62GB Series connectors have been well established with
Government authorities on an international scale and users
can be found in Sweden, Denmark, Norway, Finland,
Germany, Spain, Holland, India, Canada and Italy.
Derating
Connectors must be derated under the following
operating conditions:
1. At elevated ambient temperatures, the current ratings
are reduced so that total maximum hot spot
temperature of 125°C is not exceeded.
2. At high altitudes, revised voltage ratings become
effective as shown on page 7.
3. When connectors to different specifications are
intermated, the combination must not be operated
under conditions more severe than the less
stringent clause of either specification.
Basic Construction
62GB Series can be supplied in brass or stainless steel.
The normal shell finish used, which has a high resistance to
corrosion, is zinc cobalt olive drab. Other finishes may be
supplied to special order, such as cadmium plate which is
available by adding deviation (714) to the end of part
number. For other finishes available, please see part
number breakdown
Inserts are of polychloroprene rubber compounded to an
Amphenol specification. Operating temperature range is
-55°C to 125°C, and the connectors have gold-plated
contacts designed for soldered connections. Configurations
for size 20 contacts range between 2 contacts in the size 8
12.7mm (0.5in diameter) shell up to a maximum of 61
contacts in the size 2436.1 mm (1.5in diameter) shell.
Intermediate sizes, and contact data for heavier current
ratings are shown in the insert availability chart on page 6
and 7.
Hermetic connectors with glass sealed dielectric are
manufactured with mild steel shells and nickel iron
contacts plated tin over copper.
* Other finishes are available on request.
Protection Against Mis-Mating or Cross-Plugging
Positive shell-to-shell keying is provided with keys and
keyways in a choice of either the normal (N) or any of the
four preferred alternate positions: B, C, E and F. This
prevents mismating between shells of different
orientations and overcomes the difficulties associated with
rotated inserts and a standard key-keyway orientation. In
the latter system, damage to the inserts or contacts can
result if excessive force is used to engage non-mating
pairs.
Rotated inserts are available in positions w, x, y and z.
These are to be requested via the part number
configuration. See part number breakdown.
1
Schedule of Tests
Required for Qualification
Approval
Tests
Visual Examination
Dimensions, outline mass(including
contacts) Compatibility Gauging
procedure
Polarization
Engaging and separating force, connector
Contact Holding Force
Sealing (air pressure)
Sealing Hermetic
Contact Resistance
Housing (Shell) Continuity
Insulation Resistance
Voltage Proof
Soldering
Bumping
Sine Vibration
Shock
Acceleration (Steady State)
Rapid Change of Temperature
Climatic Sequence
Flammability
Damp Heat (Steady State)
Brief Description
Engagement max: 0,90 Nm (8.0 lbf.in.) to
4,97 Nm (44 lbf.in.) according to shell size.
Separation min: 0,22 Nm (2.0 lbf.in.) to 1,58
Nm (14.0 lbf.in.) according to shell size.
0,21 N (0.047 lbf) min.size 20
0,56 N (0.126 lbf)min. size 16
Max leakage 28,53 uNm/s (1 cm3/h), 1
bar (14.5 p.s.i.) differential.
Hermetic receptacles have a max leak of 0.1 micron
cubic foot per hour (1 x 10-6Cm3/s)
5 milliohms max.
200 milliohms max. 5 milliohms max.
grounding spring styles. Plating dependant.
5,000 Megaohms at 500 - 50 V d.c.
See page 7. Duration
1
minute
As BS 9520: 1983, Clause 1.2.6.7,
Method 2. Bit temperature of +350oC
As BS 9520: 1983, Clause 1.2.6.2. 4,000
-10 bumps / 390m / s2 (40 gn).
As BS 9520: 1983, Clause 1.2.6.3. Procedure A. 10 Hz to
5000 Hz, 0.75 mm / 10 gn.
As BS 9520: 1983, Clause 1.2.6.4. 981
m/s2 (100 g n).
As BS 9520: 1983, Clause 1.2.6.5. 490
m/s2 (50 gn).
As BS 9520: 1983, Clause 1.2.6.8. -550C
to +125oC one hour at each
temperature = 1 cycle. 5 cycles to be
completed
As BS 9520: 1983, Clause 1.2.6.12.
Severity 55/125/56.
As BS 9520: 1983, Clause 1.2.6.9. Direct
flame applied, duration 1 minute.
As BS 9520: 1983, Clause 1.2.6.15.
Severity 56 days.
2
Schedules of Tests
Required for Qualification
Approval
Tests Brief Description
Immersion (at low air pressure)
Mechanical Endurance
High Temperature Endurance
Mould Growth
Salt Mist (plating dependant)
Dust
Robustness of Terminations
Contact Retention (in insert)
Insert Retention (in shell)
Test Prod Damage
Impact
Grounding Spring Holding Force Plugs with grounding
springs only.
Fluid Resistance
Compass Safe Distance
3 cycles at 30 mins each cycle, total immersion in
water at pressure 44 m bar.
500 operations minimum
Long term: 1,000 hrs. at 850 C ambient carrying the
specified current. Short term: 250 hrs at 1250 C, no
current.
As BS 9520: 1983, Clause 1.2.6.15. 28
days duration.
As BS 9520: 1983, Clause 1.2.6.17.
Severity 1. Four spray periods of 2
hours with a humidity storage period of
seven days after each
As BS 9520: 1983, Clause 1.2.6.18
Exposure 30 minutes.
44,5 N (101bf) size 16
22,2 N (5 lbf) size 20
67,0 N (15 lbf) min. size 20
112,0 N (25 lbf) min. size 16
and above
517 KN1m2 (751bf/in 2 min.
Moment: 0,056 Nm (0.5 lbf in) size 20
0,225 Nm (2 lbf in) size 16
Five impacts, drop height 1 m (3ft.3 in.).
1,17 N (0.263 lbf) to 2,74 N (0.616 lbf)
according to size.
Immersion in 4 solvents and 9 fluids
including aircraft fuels, lubricating oils and
hydraulic fluids.
As BS 9520: 1983, Clause 1.2.5.12. 127
mm (5.0 in) min.
3
Connector Styles
Available
Receptacles
Box Mounting
See Pages 10-16
Accessories
See Pages 40-55
Single Hole Mounting
See Pages 17-27
Cable Mounting
See Pages 28-31
Hermetic Seal
See Pages
16 & 23
4
Connector Styles
Available
Plugs
Straight Plug
See Pages 34-37
Grounded Plug
See Page 34
Accessories
See Pages 40-55
Audio Plug
See Page 38
Push on
-
Pull off
See Page 39
5
Insert Availability
NOTES
* This insert arrangement is not included in B.S.
spec., but is available and. listed in MIL-C-26482.
Due to the arrangement of contacts in the
14-12 insert arrangement it is classified, for
current derating, in the shell size range 18-24.
Lettering of inserts shown above corresponds to view of front
(mating surface of pin inserts or rear face (cable accessory
end) of socket inserts.
KEY
•
No 16 size contacts
O
No 20 size contacts
CURRENT RATING
Maximum current per individual contact (in isolation) at a
maximum ambient temperature of 85°C: Size 20 contact 7.5A
Size 16 contact 13A The performance of 62GB Series
connectors at all times exceeds the maximum continuous
bunched rating of the appropriate size wire, or cable of
equivalent temperature rating. This bunched rating is therefore
the determining factor. In the case of mixed loadings, the
greatest individual load shall be the bunched loading. In any
combination of ambient temperature plus temperature rise due
to current flow through the contacts, the maximum connector
internal hot spot temperature of 125°C must not be exceeded.
That is, when only one contact per connector is loaded.
6
Insert Availability
VOLTAGE RATINGS
ALTITUDE
-
THOUSANDS OF FEET (METRES)
Relationship between flashover voltage and
altitude for each voltage rating
VOLTAGE RATINGS
Two categories of voltage rating are specified in
BS9522 F0017, F0038 and N0001.
Rating 1 (700V d.c. working at sea-level) Applicable to the
high contact density inserts shown in the upper section of the
insert availability diagram above.
Rating 2 (1200V d.c. working at sea-level) Applicable to
the inserts shown in the lower section of the insert
availability diagram.
Altitude derating. Information on voltage derating for
operation at altitudes above sea-level can be obtained from
the flashover voltage altitude curves on the left.
22
22
-
55
D.C.
WORKING
VOLTAGE
A.C.
WORKING
VOLTAGE
R.M.S.
PROOF
VOLTAGE
D.C. OR A.C.
PEAK
Rating 1
Sea level
300 mb at
20°C
8,500m
(27,800 ft)
44 mb at
20°C
20,000m
(66,000 ft)
Rating 2
Sea level
300 mb at
20°C
8,500m
(27,800 ft)
44 mb at
20"C
20,000m
(66,000 ft)
700
550
330
120
0
650
380
500
390
230
850
460
270
2100
1100
660
3000
1300
760
24
ALTITUDE
24
-
61
7
Ordering
62GB Series
Connectors
To obtain the specific connector required write down the connector number from the
typical example below. Only inserts shown in the availability chart on p. 10&11 can be
specified. All connectors are delivered with protective dust covers
62GB
SHELL STYLE
1
4
E
Environmental code
A - Plain shell, exposed
solder buckets. No
grommet
E - Insert seal and grommet seal
with grommet nut (excluding
12E which has plain shell and
no grommet or nut)
F - As (E) but grommet nut
has integral strain relief
clamp
H - Hermetic seal no cable
accessories
J - As (E) but with resilient gland
seal and nut for unscreened
jacketed cable. No grommet
supplied. See pp. 26-27 for
accessory to accept
screened jacketed cable.
P - Potting construction
complete with potting
mould
T - Exposed solder buckets.
Threaded shell for cable
accessories
Shell style
0 - Receptacle wall mounting
1 - Receptacle cable
mounting
2 - Receptacle box mounting
3 - Receptacle, solder flange
mounting
4 - Receptacle, internally
threaded with cable
accessories as illustrated, for
single hole mounting
6 -
Plug cable mounting
7- Receptacle, plain shell,
single hole mounting
Specification key
1 - Styles originally specified in
MIL-C-26482
5 - Styles exclusive to
BS9522 F0017
Series designation
62ZN – Zinc Nickel finish
62 GB - Aluminium shell
62 GB SS -Stainless steel shell*
62 GB CU - Brass shell*
*consult factory for availability
62GB-XXH-Hermetic mild
steel shell.
HOW TO ORDER FROM MS CONNECTOR NUMBERS
Connector numbers in the AMPHENOL and MS numbering systems. Only alternative insert orientations are specified
in MIL-C-26482 which does not include alternative key/keyway orientations.
MS31 - 14 E 18 -11 P X
62GB
-
14
E
18
-
11
P
X
8
Ordering
62GB Series
Connectors
INSERT ARRANGEMENT
18 11 P B (044)
Shell size (in sixteenths of an
inch) 8, 10, 12, 14, 16
18,20,22,24
Number of contacts
2, 3, 4, 5, 6, 7, 8, 10, 11, 12,
16, 19, 21', 23, 26, 32, 41, 55,
61
* consult factory for availability
Contact Style
P - Pins
S - Sockets For hermetic
connectors. P3 denotes pin
contacts with solder bucket
terminations. (Standard range).
P2 denotes pin contacts with
flattened and pierced
terminations.
(Special order).
Orientation
(Omit if normal orientation)
Keys/Keyways: A', B, C, D',
E. F, (see p. 31)
Inserts: W,X,Y,Z.(see p56/57)
*Inactive for new designs
Deviations
(044) Rough grip heavy duty
coupling ring.
(046) Box mounting plug.
(214)Fitted with extension
back shell and strain
relief clamp without
grommet on F types
only
(218) Lever coupling ring
(219)Contacts for flexible punted
wrung (57A and 12E only)
(639) Bright cadmium plated
shells
(345) Contacts for flexible punted
wiring 12H,13H 17H only
(276) Hermetics with gold
plated contacts.
(608) Black anodise.
(416) Electroless nickel
(714) Cadmium plate
olive drab
62GB - 14E
C2098
18-11
18 11
P
M B
B
O
Style Insert
Arrangement,
see above M - Pin contacts
F - Socket contacts
Alternative
Key/Key way
Orientation
Variant.
0 – Standard
connector
9
Box Mounting
Receptacles
Table of Styles
62GB
-
50T
Page No.
12
62GB
-
10A
12
62GB
-
10E
13
6
2GB
-
10F
13
62GB
-
10J
14
62GB
-
10P
14
62GB
-
12E
15
10
Page No.
62GB
-
12E(219)
15
62GB
-
12H
Hermetic Seal
16
Box Mounting
Receptacles
Table of Styles
11
Shell
Size A
max B
± 0.005
(± 0.13)
c
max
sq.
D
TP
Sq.
E dia.
± 0.010
(± 0.254)
F
±0 005
(± 0.13)
G
dia
max.
Y
dia.
max.
X
Thread
08 0.978 0.062 0.817 0.594 0120 0.445 0.434 0.473 7/16 – 28 UNEF
24.84 1.58 20.75 15.09 3.05 11.3 11.02 12.02
10 0.978 0.062 0.942 0.719 0.120 0.445 0.558 0.590 9/16 – 24 NEF
24.84 1.58 23.93 18.26 3.05 11.3 14.17 14.99
12 0.978 0.062 1.036 0.812 0.120 0.445 0.683 0.750 11/16 - 24 NEF
24.84 1.58 26.32 20.63 3.05 11.3 17.35 19.05
14 0.978 0.062 1.130 0.906 0.120 0.445 0.808 0.875 13/16 – 20 UNEF
24.84 1.58 28.70 23.10 3.05 11.3 20.52 22.23
16 0.978 0.062 1.223 0.969 0.120 0.445 0.933 1.000 15/16 – 20 UNEF
24.84 1.58 31.07 24.61 3.05 11.3 23.7 25.4
18 0.978 0.062 1.317 1.062 0.120 0.445 1.057 1.125 1.1/16 - 18 NEF
24.84 1.58 33.45 26.58 3.05 11.3 26.85 28.58
20 1.048 0.080 1.442 1.156 0.120 0.555 1.182 1.250 1.3/16 - 18 NEF
26.62 2.03 36.63 29.36 3.05 1410 30.02 31.75
22 1.048 0.080 1.567 1.250 0.120 0.555 1.307 1.375 1.5/16 - 18 NEF
26.62 2.03 39.80 31.75 3.05 14.10 33.20 34.93
24 1.048 0.080 1.692 1.375 0147 0.590 1.432 1.500 1.7/16 – 18 NEF
26.62 2.03 42.98 34.93 3.d4 14.99 36.37 38.1
Shell
Size A
max. B
± 0.005
( ± 0.13)
C
Max.
sq.
D
TP
sq.
E
± 0.010
( ± 0.254)
F
± 0.005
( ± 0.13)
G
dia
max.
Y
dia.
max.
M
08 1.624 0.062 0.817 0.594 0.120 0.445 0.561 0.473 1/2 - 28 UNEF
41.25 1.58 20.75 15.09 3.05 11.3 14.25 12.02
10 1.624 0.062 0.942 0.719 0.120 0.445 0.686 0.590 5/8 - 24 NEF
41.25 1.58 23.93 18.26 3.05 11.3 17.43 14.99
12 1.624 0.062 1.036 0.812 0.120 0.445 0.811 0.750 3/4 - 20 UNEF
41.25 1.58 26.32 20.63 3.05 11.3 20.60 19.05
14 1.624 0.062 1.130 0.906 0.120 0.445 0.936 0.875 7/8 - 20 UNEF
41.25 1.58 28.70 23.10 3.05 11.3 23.78 22.23
16 1.624 0.062 1223 0.969 0.120 0.445 1.061 1.000 1 - 20 UNEF
41.25 1.58 31.07 24.61 3.05 11.3 26.98 25.4
18 1.624 0.062 1.317 1.062 0.120 0.445 1.186 1.125 1.3/16 - 18 NEF
41.25 1.58 33.45 26.58 3.05 11.3 30.12 28.58
20 1 .687 0.080 1.442 1.156 0.120 0.555 1.311 1 250 1.3/16 - 18 NEF
42.85 2.03 36.63 29.36 3 05 14.10 33.30 31.75
22 1.687 0.080 1.567 1.250 0.120 0.555 1.436 1.375 1.7/16 - 18 NEF
42.85 2.03 39.80 31.75 3.05 14.10 36.47 34.93
24 1.730 0.080 1.692 1.375 0 147 0.590 1.561 1.500 1.7/16 - 18 NEF
43.94 2.03 42.98 34.93 3.73 14.99 39.65 38.1
Box Mounting
Receptacles
50T
62GB
-
50T
4-hole flange mounting with threaded shell to
accept standard cable accessories.
10A
62GB
-
10A
4-Hole flange mounting with general
duty back shell. No grommet supplied.
12
Box Mounting
Receptacles
10E
62GB
-
10E
MIL-C-26482 MS3110E
Shell A B C D E F G V
Size max ± 0.005 max TP ±
0.010 ± 0.005 dia dia.
( ± 0.13) sq. sq. (± 0.254) (± 0.13) max max
08 1.281 0.062 0.817 0.594 0.120 0.445 0.561 0.473
32.54 1 .58 20.75 15.09 3.05 11.3 14.25 12.02
10 1.281 0.062 0.942 0.719 0.120 0.445 0.686 0.590
32.54 1.58 23.93 18.26 3.05 11.3 17.43 14.99
12 1.281 0.062 1.036 0.812 0.120 0.445 0.811 0.750
32.54 1.58 26.32 20.63 3.05 11.3 20.60 19.05
14 1.281 0.062 1.130 0.906 0.120 0.445 0.936 0.875
32.54 1.58 28.70 23.10 3.05 11.3 23.78 22.23
16 1.281 0.062 1.223 0.969 0.120 0.445 1.061 1.000
32.54 1.58 31.07 24.61 3.05 11.3 26.98 25.4
18 1.281 0.062 1.317 1.062 0.120 0.445 1.186 1.125
32.54 1.58 33.45 26.58 3.05 11.3 30.12 28.58
20 1.383 0.080 1.442 1.156 0.120 0.555 1.311 1.250
35.13 2.03 36.63 29.36 3.05 14.10 33.30 31.75
22 1.383 0.080 1.567 1.250 0.120 0.555 1.436 1.375
35.13 2.03 39.80 31.75 3.05 14.10 36.47 34.93
24 1 .383 0.080 1.692 1.375 0.147 0.590 1.561 1.500
35.13 2.03 42.98 34.93 3.74 14.99 39.65 38.1
10F
62GB
-
10F
MIL-C-26482 MS31 10F
Shell A B C D E F G H Y
Size max. ± 0.005 max. TP ± 0.010 ± 0.005 dia ± 0.005 dia.
(± 0.13) sq. Sq. (± 0.254) (± 0.13) max. (± 0.13) max.
08 1.762 0.062 0.817 0.594 0.120 0.445 0.828 0.156 0.473
44.76 1.58 20.75 15.09 3.05 11.3 21.03 3.96 12.01
10 1.762 0.062 0.942 0.719 0.120 0.445 0.891 0.188 0.590
44.76 1.58 23.92 18.26 3.05 11.3 22.63 4.78 14.99
12 1 .762 0.062 1.036 0.812 0.120 0.445 1.016 0.312 0.750
44.76 1.58 26.31 20.63 3.05 11.3 25.81 7.93 19.05
14 1.736 0.062 1.130 0.906 0.120 0.445 1.141 0.375 0.875
44.10 1.58 28.70 23.10 3.05 11.3 28.98 9.58 22.23
16 1.876 0.062 1.223 0.969 0.120 0.445 1.203 0.500 1.000
47.65 1.57 31.07 24.61 3.05 11.3 30.56 12.7 25.4
18 1.876 0.062 1.317 1.062 0.120 0.445 1.426 0.625 1.125
47.65 1.58 33.45 26.58 3.05 11.3 36.22 15.87 28.58
20 2.118 0.080 1.442 1.156 0.120 0.555 1.426 0.625 1.250
53.80 2.03 36.63 29.36 3.05 14.10 36.22 15.88 31.75
22 2.118 0.080 1.567 1.250 0.120 0.555 1.567 0.750 1.375
53.80 2.03 39.80 31.75 3.05 14.10 39.80 19.05 34.93
24 2.250 0.080 1.692 1.375 1.147 0.590 1.735 0.800 1.500
57.15 2.03 42.98 34.93 3.74 14.99 44.07 20.32 38.10
4-hole flange mounting with grommet
and grommet nut
4-hole flange mounting with grommet and
grommet nut fitted with integral strain relief
clamp
13
Box Mounting
Receptacles
Shell
Size A
max B
± 0.005
( ± 0.13)
c
max.sq D
TP
sq
E
± 0.010
( ± 0.254)
F
± 0.005
(± 0.13)
G
dia.
max.
Y
dia
max
Z Cable Entry
min max
closed free
08 1.846 0.062 0.817 0.594 0.120 0.445 0.561 0.473 0.168 0.230
46.89 1.58 20.75 15.09 3.05 11.3 14.25 12.02 4.28 5.84
10 1.846 0.062 0.942 0.719 0.120 0.445 0.686 0.590 0.205 0.312
46.89 1.58 23.93 18.26 3.05 11.3 17.43 14.99 5.21 7.93
12 1.947 0.062 1.036 0.812 0.120 0.445 0.811 0.750 0.338 0.442
49.45 1.58 26.32 20.63 3.05 11.3 20.60 19.05 8,59 11.23
14 2.147 0.062 1.130 0.906 0.120 0.445 0.936 0.875 0.416 0.539
54.54 1.58 28.70 23.10 3.05 11.3 23.78 22.23 10.57 13.69
16 2.347 0.062 1.223 0.969 0.120 0.445 1.061 1.000 0.550 0.616
59.61 1.575 31.07 24.61 3.05 11.3 26.96 25.4 13.97 15.65
18 2.547 0.062 1.317 1.062 0.120 0.445 1.186 1.125 0.600 0.672
64.70 1.575 33.45 26.58 3.05 11.3 30.12 28.58 15.24 17.07
20 2.831 0.080 1.442 1.156 0.120 0.555 1.311 1.250 0.635 0.747
71.91 2.03 36.63 29.36 3.05 14.10 33.30 31.75 16.13 18.98
22 3.031 0.080 1.567 1.250 0.120 0.555 1.436 1.375 0.670 0.846
76.99 2.03 39.80 31.75 3.05 14.10 36.47 34.93 17.02 21.49
24 3.074 0.080 1.692 1.375 0.147 0.590 1.561 1.500 0.740 0.894
78.08 2.03 42.98 34.93 3.73 14.99 39.65 38.1 18.80 22.71
10P
62GB
-
10P
4-hole flange mounting for potting
Shell
Size A
max B
± 0.005
(± 0.13)
c
max.sq. D
TP
sq
E
± 0.010
(± 0.254)
F
± 0.005
(± 0.13)
G
dia.
max
Y
dia.
max
Z
dia.
min
08 1.453 0.062 0.817 0.594 0.120 0.445 0.572 0.473 0.260
36.91 1.575 20.75 15.09 3.05 11.3 14.53 12.02 6.60
10 1.453 0.062 0.942 0.179 0.120 0.445 0.666 0.590 0.463
36.91 1.58 23.93 18.26 3.05 11.3 16.92 14.99 11.76
12 1.453 0.062 1.036 0.812 0.120 0.445 0.822 0.750 0.577
36.91 1.58 26.32 20.63 3.05 11.3 20.88 19.05 14.15
14 1.453 0.062 1.130 0.906 0.120 0.445 0.907 0.875 0.590
36.91 1.58 28.70 23.10 3.05 11.3 23.04 22.23 14.99
16 1.453 0.062 1.223 0.969 0.120 0.445 1.040 1.000 0.713
36.91 1.58 31.07 24.61 3.05 11.3 26.42 25.40 18.11
18 1.453 0.062 1.317 1.062 0.120 0.445 1.165 1.125 0.835
36.91 1.58 33.45 26.58 3.05 11.3 29.60 28.58 22.21
20 1.672 0.080 1.442 1.156 0.120 0.555 1.285 1.250 1.015
42.47 2.03 36.63 29.36 3.05 14.10 32.64 31.75 25.78
22 1.672 0.080 1.567 1.250 0.120 0.555 1.400 1.375 1.015
42.47 2.03 39.80 31.75 3.05 14.10 35.56 34.93 25.78
24 1.734 0.080 0.692 1.375 0.147 0.590 1.540 1.500 1.265
44.05 2.03 42.98 34.93 3.74 14.99 39.12 38.10 32.13
10J
4-hole flange mounting with clamp for
unscreened jacketed cable. No grommet
supplied
62GB
-
10J
14
Box Mounting
Receptacles
12E
62GB
-
12E
MIL-C-26482 MS3112E
Shell
Size A
max 8
± 0.005
(± 0.13)
C
max
sq.
D
TP
sq.
E
± 0 010
(± 0.254)
F
± 0.005
( ± 0.13)
G
dia.
max.
L V
dia.
max.
08 0.978 0.062 0.817 0.594 0.120 0.445 0.434 0.800 0.473
24.84 1.58 20.75 15.09 3.05 11.3 11.02 20.32 12.02
10 0.978 0.062 0.942 0.719 0.120 0.445 0.558 0.800 0.590
24.84 1.58 23.93 18.26 3.05 11.3 14.17 20.32 14.99
12 0.978 0.062 1.036 0.812 0.120 0.445 0.683 0.800 0.750
24.84 1.58 26.32 20.63 3.05 11.3 17.35 20.32 19.05
14 0.978 0.062 1.130 0.906 0.120 0.445 0.808 0.800 0.875
24.84 1.58 28.70 23.10 3.05 11.3 20.52 20.32 22.23
16 0.978 0.062 1.223 0.969 0.120 0.445 0.933 0.800 1.000
24.84 1.58 31.07 24.61 3.05 11.3 23.70 20.32 25.4
18 0.978 0.062 1.317 1.062 0.120 0.445 1.057 0.800 1.125
24.84 1.58 33.45 26.58 3.05 11.3 26.85 20.32 28.58
20 1.048 0.080 1.442 1.156 0.120 0.555 1.182 0.875 1.250
26.62 2.03 36.63 29.36 3.05 14.10 30.02 22.23 31.75
22 1.048 0.080 1.567 1.250 0.120 0.555 1.307 0.875 1.375
26.62 2.03 39.80 31.75 3.05 14.10 33.20 22.23 34.93
24 1 .048 0.080 1.692 1.375 0.147 0.590 1.432 0.875 1.500
26.62 2.03 42.98 34.93 3.74 14.99 36.37 22.23 38.1
Shell
Size A
max B
± 0.005
(±0.13)
C
max
sq.
D
TP
sq.
E
dia
0.010
F
± 0.005
(± 0.13)
G
dia.
Max
J
± 0.020
(± 0.51)
K
L
Y
dia
max.
Z
min max. max min
08 0.982 0.062 0.817 0.594 0.120 0.445 0.434 0.089 0.030 0.028 0.198 0.166 0.473 0.800
24.95 1.58 20.75 15.09 3.05 11.3 11.02 2.26 0.76 0.70 5.03 4.22 12.02 20.32
10 0.982 0.062 0.942 0.719 0.120 0.445 0.558 0.089 0.030 0.028 0.198 0.166 0.590 0.800
24.95 1.58 23.93 18.26 3.05 11.3 14.17 2.26 0.76 0.70 5.03 4.22 14.99 20.32
12 0.982 0.062 1.036 0.812 0.120 0.445 0.683 0.089 0.030 0.028 0.198 0.166 0.750 0.800
24.95 1.58 26.32 20.63 3.05 11.3 17.35 2.26 0.76 0.70 5.03 4.22 19.05 20.32
14 0.982 0.062 1.130 0.906 0.120 0.445 0.808 0.089 0.030 0.028 0.198 0.166 0.875 0.800
24.95 1.58 28.70 23.10 3.05 11.3 20.52 2.26 0.76 0.70 5.03 4.22 22.23 20.32
16 0.982 0.062 1.223 0.969 0.120 0.445 0.933 0.089 0.030 0.028 0.198 0.166 1.000 0.800
24.95 1 .58 31.07 24.61 3.05 11.3 23.70 2.26 0.76 0.70 5.03 4.22 25.4 20.32
18 0.982 0.062 1.317 1.062 0.120 0.445 1.057 0.089 0.030 0.028 0.198 0.166 1.125 0.800
24.95 1.58 33.45 26.58 3.05 11.3 26.85 2.26 0.76 0.70 5.03 4.22 28.58 20.32
20 1.057 0.080 1.442 1.156 0.120 0.555 1.182 0.076 0.030 0.028 0.185 0.153 1.250 0.875
26.85 2.03 36.63 29.36 3.05 14.10 30.02 1.93 0.76 0.70 4.70 3.89 31.75 22.23
22 1.057 0.080 1.567 1.250 0.120 0.555 1.307 0.076 0.030 0.028 0.185 0.153 1.375 0.875
26.85 2.03 39.80 31.75 3.05 14.10 33.20 1.93 0.76 0.70 4.70 3.89 34.93 22.23
24 1.057 0.080 1.692 1.375 0.147 0.590 1.432 0.076 0.030 0.028 0.185 0.153 1.500 0.875
26.85 2.03 42.98 34.93 3.74 14.99 36.37 1.93 0.76 0.70 4.70 3.89 38.1 22 23
62GB
-
12E (219)
12E (219)
4-hole flange mounting with plain shell
with film wire terminations
15
Box Mounting
Receptacles
Hermetic Seal
12H 62GB-12H
Shell
Size A
max B
± 0.005
(± 0.13)
C
max
sq.
D E
0.008
(± 0.203)
(±.051) .002
F
± 0.005
(± 0.13)
R
±0.005
(±0.13)
S Y
08 0.828 0.062 0.812 0.594 0.120 0.443 0.568 1.250 0.473
21.03 1.57 20.61 15.08 3.05 11.25 14.42 31.73 12.01
10 0.828 0.062 0.937 0.719 0.120 0.443 0.695 1.359 14.99
21.03 1.57 23.79 18.29 3.05 11.25 17.53 34.52 14.99
12 0.828 0.062 1.031 0.812 0.120 0.443 0.864 1.531 0.750
21.03 1.57 26.17 20.57 3.05 11.25 21.84 38.89 19.05
14 0.828 0.062 1.125 0.906 0.120 0.443 0.989 1.656 0.875
21.03 1.57 28.57 23.11 3.05 11.25 25.15 42.06 22.23
16 0.828 0.062 1.218 0.969 0.120 0.443 1.113 1.781 1.000
21.03 1.57 30.93 24.64 3.05 11.25 28.19 45.24 25.40
18 0.828 0.062 1.312 1.062 0.120 0.443 1.238 1.891 1.125
21.03 1.57 33.32 26.92 3.05 11.25 31.49 48.03 28.58
20 0.890 0.093 1.437 1.156 0.120 0.561 1.363 2.031 1.250
22.60 2.36 36.49 29.46 3.05 14.24 34.54 51.59 30.75
22 0.890 0.093 1.562 1.250 1.120 0.561 1.488 2.156 1.375
22.60 2.36 39.67 31.75 3.05 14.24 37.85 54.76 34.93
24 0 890 0.093 1.687 1.375 0.147 0.593 1.615 2.277 1.500
22.60 2.36 42.84 35.05 3.81 15.06 41.15 57.84 38.10
4-hole square mounting with exposed
solder buckets or flattened and pierced
pins.
16
Single Hole Fixing
Receptacles
Table of Styles
62GB
-
57A
Page No.
2
0
62GB
-
57A (219)
20
62GB
-
14E
21
62GB
-
14F
21
62GB
-
57T
22
62GB
-
17P
22
62GB
-
17H
Hermetic Seal
23
17
Single Hole Fixing
Receptacles
Table of Styles
62GB
-
1 3H
Hermetic Seal
62GB
-
5005
-
10
62GB
-
5036
-
10
62GB
-
5016
-
10
62GB
-
5024
62GB
-
505
2
62GB
-
5030
Page No.
23
24
24
25
25
26
26
18
Single Hole Fixing
Receptacles
Table of Styles
62GB
-
5065
62GB
-
5067
Page No.
27
27
19
Single Hole Fixing
Receptacles
57A
62GB
-
57A
C2099
Single hole mounting with plain shell for
direct wiring to exposed solder buckets.
Has panel 'O' ring seal.
Shell
Size A
max B
± 0.005
(± 0.13)
C
sq, F
± 0.005
(±0.13)
K
min max L M
-0.005
(-0.13)
N R
±.0.005 ± 0.005
(±0.13) (±0.13)
s
min Y X
Thread
08 0.978 0.117 0.942 0.706 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473 9/16 - 24 NEF
24.84 2.97 23.93 17.93 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03
10 0.978 0.117 1.067 0.706 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590 11/16 -24 NEF
24.84 2.97 27.10 17.93 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99
12 0.978 0.117 1.255 0.706 0.062 0.125 1.062 0.815 0.828 0 885 1 531 0.750 7/8 -20 UNEF
24.84 2.97 31.88 17.93 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05
14 0.978 0.117 1.380 0.706 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875 1 -20 UNEF
24.84 2.97 35.05 17.93 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23
16 0.978 0.117 1.505 0.706 0.062 0.125 1 312 1.063 1.076 1.135 1.781 1.000 1.1/8 - 18 NEF
24.84 2.97 38.23 17.93 1.58 3.18 33.32 27.00 27.33 28.83 45.24 25.40
18 0.978 0.117 1.630 0.706 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125 1.1/4 - 18 NEF
24.84 2.97 41.40 17.93 1.58 3.18 36.50 30.18 30.50 32.00 48 03 28.58
20 1.048 0.148 1.817 0.894 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1.250 1.3/8 - 18NEF
26.62 3.76 46.15 22.71 1.58 6.35 38.68 33.35 33.68 35.18 51.59 31.75
22 1.048 0.148 1.942 0.894 0.062 0.250 1.687 1.438 1.451 1.510 2.156 1.375 1.1 /2 - 18 NEF
26.62 3.76 49.33 22.71 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93
24 1.048 0.148 2.067 0.927 0.062 0.250 1 .812 1 .563 1.576 1 635 2 277 1.500 1.5/8 - 18 NEF
26.62 3.76 52.50 23.55 1.575 6.35 46.05 39.70 40.03 41.45 57.84 38.10
57A(219)
62GB
-
57A (219)
Single hole mounting with plain shell
and film wire terminations
Shell
Size A
m B
±0.005
(± 0.13)
C
sq.
max.
max D
min F
±0.005
(±0.13)
H
max min K
min max L M N R
-0.005 ±0.005 ±0.005
(-0.13) (±0.13) (±0.13)
S
min Y X
Thread
08 0.976
0.117 0.942 0.030
0.028 0.706 0.173 0.133 0.062
0.125 0.750 0.527 0.540 0.572 1.250
0.473 9/16 -24 NEF
24.79
2.97 23.93 0.76 0.71 17.93 4.40 3.38 1.58 3.18 19.05 13.3 13.72 14.53 31.75
12.03
10 0.976
0.117 1.067 0.030
0.028 0.706 0.173 0.133 0.062
0.125 0.875 0.652 0.665 0.697 1.359
0.590 11/16 -24 NEF
24.79
2.97 23.93 0.76 0.71 17.93 4.40 3.38 1.58 3.18 22.23 16.56 16.89 17.70 34.52
14.99
12 0.976
0.117 1.255 0.030
0.028 0.706 0.173 0.133 0.062
0.125 1.062 0.815 0.828 0.885 1.531
0.750 7/8 -20 UNEF
24.79
2.97 31.88 0.76 0.71 17.93 4.40 3.38 1.58 3.18 26.98 20.70 21.03 22.48 38.89
19.05
14 0.976
0.117 1.380 0.030
0.028 0.706 0.173 0.133 0.062
0.125 1.187 0.939 0.952 1.010 1.656
0.875 1 - 20 UNEF
24.79
2.97 35.05 0.76 0.71 17.93 4.40 3.38 1.58 3.18 30.15 23.85 24.18 25.65 42.06
22.26
16 0.976
0.117 1.505 0.030
0.028 0.706 0.173 0.133 0.062
0.125 1.312 1.063 1.076 1.135 1.781
1.000 1.1/8 - 18 NEF
24.79
2.97 38.23 0.76 0.71 17.93 4.40 3.38 1.58 3.18 33.32 27.00 27.33 28.83 45.24
25.40
18 0.976
0.117 1.630 0.030
0.028 0.706 0.173 0.133 0.062
0.125 1.437 1.188 1.201 1.260 1.891
1.125 1.1 /4 - 18 NEF
24.79
2.97 41.40 0.76 0.71 17.93 4.40 3.38 1.58 3.18 36.50 30.18 30.50 32.00 48.03
28.58
20 1 .195
0.148 1 817 0.030
0.028 0.894 0.173 0.133 0.062
0.250 1 562 1 .313
1 .326
1 .385
2.031
1 .250
1 .3/8 - 18 NEF
30.35
3.76 46.15 0.76 0.71 22.71 4.40 3.38 1.58 6.35 38.68 33.35 35.18 51 59 31.75
22 1.195
0.148 1.942 0.030
0.028 0.894 0.173 0.133 0.062
0.250 1.687 1.438 1.451 1.510 2.156
1.375 1.1/2 -18NEF
30.35
3.76 49.33 0.76 0.71 22.71 4.40 3.38 1.58 6.35 42.85 36.53 36.86 38.35 54.76
34.93
24 1.228
0.148 2.067 0.030
0.028 0.927 0.173 0.133 0.062
0.250 1.812 1.563 1.576 1.635 2.277
1.500 1.5/8 - 18 NEF
30.35
3.76 52.50 0.76 0.71 23.55 4.40 3.38 1.58 6.35 46.05 39.70 40.03 41.45 57.84
38.10
20
Single Hole Fixing
Receptacles
14E
62GB
-
14E
MIL-C-26482 MS3114E
Single hole mounting with grommet
and grommet nut.
Has panel 'O' ring seal
Shell
Size A
max B
±0.005
(±0.13)
C
max
sq.
F
±0.005
(±0.13)
G
Dia
Max
K
min max L M N R
-0.005 ±0.005 ±0.005
(-0.13) ( ±0.13) (±0.13)
S Y X
Thread
08 1.344 0.117 0.942 0.706 0 713 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473 9/16-24NEF
34.14 2.97 23.93 17.93 18.11 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03
10 1.344 0.117 1.067 0.706 0.838 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590 11/16 -24 NEF
34.14 2.97 27.10 17.93 21.29 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99
12 1.344 0.117 1.255 0.706 0.963 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750 7/8 -20 UNEF
34.14 2.97 31 .88 17.93 24.46 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05
14 1 .344 0.117 1.380 0.706 1.088 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875 1 - 20 UNEF
34.14 2.97 35.05 17.93 27.63 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23
16 1.344 0.117 1.505 0.706 1.213 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000 1.1/8 -18NEF
34.14 2.97 38.23 17.93 30.81 1.58 3.18 33.32 27.00 27.33 28.83 45.24 25.40
18 1.344 0.117 1.630 0.706 1.338 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125 1.1/4 –18 NEF
34.14 2.97 41.40 17.93 33.98 1.58 3.18 36.50 30.18 30.50 32.00 48.03 28.58
20 1.576 0.148 1 817 0.894 1.463 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1.250 1.3/8 - 18 NEF
40.03 3.76 46.15 22.71 37.16 1.58 6.35 38.68 33.35 33.68 35.18 51.59 31.75
22 1.576 0.148 1.942 0.894 1 .588 0.062 0.250 1.687 1.438 1.451 1.510 2.156 1.375 1.1 /2 - 18 NEF
40.03 3.76 49.33 22.71 40.33 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93
24 1.609 0.148 2.067 0.927 1.713 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1.500 1.5/8 - 18 NEF
40.87 3.76 52.50 23.55 43.51 1.58 6.35 46.05 39.70 40.03 41.45 57.84 38.10
14F
62GB
-
1 4F
MIL-C-26482 MS3114F
Single hole mounting with grommet and
grommet nut fitted with integral strain
relief clamp.
Has panel 'O' ring seal
Shell
Size A
max B
±0.005
(±0.13)
C
max
sq.
F
±0.005
(±0.13)
G
dia.
max.
H
0.005
(± 0.13)
K
min max L M N R
-0.005 ±0.005 ±0.005
(-0.13) (±0.13) (±0.13)
S Y X
Thread
08 1.762 0.117 0.942 0.706 0.828 0.156 0.062 0.125 0.750 0.527 0.540 0.572 1 250 0.473 9/16 -24 NEF
44.75 2.97 23.93 17.93 21.03 3.96 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03
10 1.762 0.117 1.067 0.706 0.891 0.188 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590 11/16 - 124 NEF
44.75 2.97 27.10 17.93 22.63 4.78 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99
12 1.762 0.117 1.255 0.706 1.016 0.312 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750 7/8 - 20 UNEF
44 75 2.97 31.88 17.93 25.81 7.93 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05
14 1 .736 0.117 1.380 0.706 7.147 0.375 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875 1 - 20 NEF
44.10 2.97 35.05 17.93 28.97 9.53 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23
16 1.876 0.117 1.505 0.706 1.203 0.500 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000 1.1/8 - 18 NEF
47.65 2.97 38.23 17.93 30.56 12.7 1.58 3.18 33.32 27.00 27.33 28.83 45.24 25.40
18 1.876 0.117 1.630 0.706 1.426 0.625 0.062 0.125 1.437 1.188 1.201 1.260 1.891 7.125 1.1/4 - 18 NEF
47.65 2.97 41.40 17.93 36.22 15.88 1.58 3.18 36.50 30.18 30.50 32.00 48.03 28.58
20 2.118 0.148 1.817 0.894 1.426 0.625 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1.250 1.3/8 - 18 NEF
53.8 3. 76 46.15 22.71 36.22 15.88 1.58 6.35 38 68 33.35 33.68 35.18 51 .59 31.75
22 2.118 0.148 1.942 0.894 7.567 0.750 0.062 0.250 1.687 1.438 1.451 1.510 2.756 1.375 1.1/2 -18 NEE
53.8 3.76 49.33 22.71 39.80 19.05 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93
24 2.250 0.148 2.067 0.927 1.735 0.800 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1.500 1.5/8 - 18 NEF
57.15 3.76 52.50 23.55 44.07 20.32 1.58 6.35 46.05 39.70 40.03 41.45 57.84 38.10
21
Single Hole Fixing
Receptacles
57T
62G B
-
57T
Single hole mounting with threaded
shell to accept accessories
Shell
Size A
max B
± 0.005
(± 0.13)
c
max.
sq.
F
± 0.005
(±0.13)
G
dia,
max.
K
min max L M
-0.005
(- 0.13)
N Y X
Thread
08 0.978 0.117 0.942 0.595 0.426 0.062 0.125 0.750 0.527 7/16 - UNEF 0.473 9/16 - 24 NEF
24.84 2.97 23.93 15.12 10.82 1.58 3.18 19.05 13.3 12.03
10 0.978 0.117 1.067 0.595 0.552 0.062 0.125 0.875 0.652 9/16 – UNEF 0.590 11/16 – 24 NEF
24.84 2.97 27.10 15.12 14.02 1.58 3.18 22.23 16.56 14.99
12 0.978 0.117 1.255 0.595 0.677 0.062 0.125 1.062 0.815 11/16 – UNEF 0.750 7/8 – 20 UNEF
24.84 2.97 31 .88 15.12 17.20 1.58 3.18 26.98 20.70 19.05
14 0.978 0.117 1.380 0.595 0.802 0.062 0.125 1.187 0.939 13/16 - UNEF 0.875 1 – 20 UNEF
24.84 2.97 35.05 15.12 20.37 1.58 3.18 30.15 23.85 22.23
16 0.978 0.117 1.505 0.595 0.927 0.062 0.125 1.312 1.063 15/16 – UNEF 1.000 1.1/18 – 18 NEF
24.84 2.97 38.23 15.12 23.55 1.58 3.18 33.32 27.00 25.40
18 0.978 0.117 1.630 0.595 1.052 0.062 0.125 1.437 1.188 1.1/16 – UNEF 1.125 1.1/4 – 18 NEF
24.84 2.98 41.40 15.12 26.72 1.58 3.18 36.50 30.18 28.58
20 1.048 0.148 1.817 0.720 1.167 0.062 0.250 1.562 1.313 1.3/16 – UNEF 1.250 1.3/8 - 18 NEF
26.62 3.76 46.15 18.29 29.65 1 58 6.35 38.68 33.35 31.75
22 1.048 0.148 1.942 0.720 1.292 0.062 0.250 1.687 1.438 1.5/16 – UNEF 1.375 1.1/2 – 18 NEF
26,62 3.76 49.33 18.29 32.82 1.58 6.35 42.85 36.53 34.93
24 1.048 0.148 2.067 0.753 1.416 0.062 0.250 1.812 1.563 1.7/16 - UNEF 1.50 1.5/8 - 18 NEF
26.62 3.76 52.50 19.13 35.97 1.58 6.35 46.05 39.70 38.10
17P
62GB
-
17P
MIL
-
C
-
26482 MS3114P
Single hole mounting for potting. Supplied
complete with potting mould locating ring
and panel 'O' ring seal
Shell
Size A
max. B
±0.005
(±0.13)
C
max.
sq.
F
± 0.005
(±0.13)
G K
min max. L M
-0.005
(-0.13)
N
±0.005
(±0.13)
R
±0.005
(±0.13)
Y Z X
Thread
08 1.391 0.117 0.942 0.706 0.572 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473 0.260 9/16 -24 NEF
35.33 2.97 23.93 17.93 14.53 1.58 3.175 19.05 13.3 13.72 14.53 31.75 12.03 6.60
10 1.391 0.117 1.067 0.706 0.666 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590 0.463 11/16 -24 NEF
35.33 2.97 27.10 17.93 16.92 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11.76
12 1.391 0.117 1.255 0.706 0.822 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750 0.557 7/8 - 20 UNEF
35.33 2.97 31.88 17.93 20.88 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05 14.15
14 1.391 0.117 1.380 0.706 0.907 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875 0.590 1 - 20 UNEF
35.33 2.97 35.05 17.93 23.06 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23 14.99
16 1.391 0.117 1.505 0.706 1.040 0.062 0.125 1.312 1 063 1 .076 1.135 1.781 1.000 0.713 1.1/18 – 18 NEF
35.33 2.97 38.23 17.93 26.42 1.58 3.18 33.32 27.00 27.33 28.83 45.24 25.40 18.11
18 1.391 0.117 1.630 0.706 1.165 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125 0.835 1.1/4 - 18 NEF
35.33 2.97 41.40 17.93 29.59 1.58 3.175 36.50 30.18 30.50 32.00 48.03 28.58 21.21
20 1.641 0.148 1.817 0.894 1.285 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1.250 1.015 1.3/8 –18 NEF
41.68 3.76 46.15 22.71 32.64 1.58 6.35 38.68 33.35 33.68 35.18 51.59 31.75 25.78
22 1.641 0.148 1.942 0.894 1.400 0.062 0.250 1.687 1.438 1.451 1.510 2.156 1.375 1.015 1.1/2 –18 NEF
41.68 3.76 49.33 22.71 35.56 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93 25.78
24 1.674 0.148 2.067 0.927 1 .540 0.062 0.250 1.812 1 .563 1.576 1.635 2.277 1.500 1.265 1.5/8 - 18 NEF
42.52 3.76 52.50 23.55 39.12 1.58 6.35 46.05 39.70 40.03 41.45 57.84 38.10 32.13
22
Single Hole Fixing
Receptacles
Hermetic Seal
17H
62GB
-
17H
MIL-C-26482 MS3114H
Single hole mounting with pin contacts in one piece
glass-to-metal seal. Exposed solder buckets or
flattened and pierced pins.
Has panel 'O' ring seal
Shell
Size A
max. B
±0.005
(±0.13)
C
max.
sq
F
±0.005
(±0.13)
min K
max L M
-0.005
(-0.13)
N R
±0.005 ±0.005
(±0.13) (±0.13)
S Y X
Thread
08 0.828 0.094 0.942 0.706 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473 9/16 - 24 NEF
21.03 2.39 23.93 17.93 1.57 3.18 19.05 13.39 13.72 14.53 31.75 12.01
10 0.828 0.094 1.067 0.706 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590 11/16 – 24 NEF
21.03 2.39 27.10 17.93 1.57 3.18 22.23 16.56 16.89 17.70 34.52 14.99
12 0.828 0.094 1.255 0.706 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750 7/8 – 20 UNEF
21.03 2.39 31.88 17.93 1.57 3.18 26.97 20.70 21.03 22.48 38.89 19.05
14 0.828 0.094 1.380 0.706 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875 1 - 20 UNEF
21.03 2.39 35.05 17.93 1.57 3.18 30.15 23.85 24.18 25.65 42.06 22.23
16 0.828 0.094 1.505 0.706 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000 1.1/8 – 18 NEF
21.03 2.39 38.23 17.93 1.57 3.18 33.32 27.00 27.33 28.53 45.24 25.40
18 0.828 0.094 1.630 0.706 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125 1.1/4 – 18 NEF
21.03 2.39 41.40 17.93 1.57 3.18 36.50 30.18 30.51 32.00 48.03 28.58
20 0.828 0.125 1.817 0.894 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1.250 1.3/8 – 18 NEF
21.03 3.18 46.15 22.71 1.57 6.35 39.67 33.35 33.68 35.18 51.59 30.75
22 0.890 0.125 1.942 0.894 0.062 0.250 1.687 1.438 1.451 1.510 2.156 1.375 1.1/2 – 18 NEF
22.61 3.18 49.33 22.71 1.57 6.35 42.85 36.53 36.86 38.35 54.76 34.93
24 0.890 0.125 2.067 0.927 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1.500 1.5/8 – 18 NEF
22.61 3.18 52.50 23.55 1.57 6.35 46.02 39.70 40.03 41.53 57.84 38.10
13H
62GB
-
1 3H
MIL-C-26482 MS3113H
Solder mounting with plain shell and exposed
solder buckets or flattened and pierced pins
Shell
Size A
max B
±0.005
(± 0.13)
c
max F
±0.005
( ± 0.13)
G
max J
max R
±0.005
( ± 0.13)
S
min Y
dia.
max
08 0.828 0.036 0.630 0.426 0.562 0.592 0.578 1.250 0.473
21.03 0.91 16.00 10.82 14.27 15.04 14.68 31.75 12.01
10 0.828 0.036 0.755 0.426 0.672 0.592 0.687 1.359 0.590
21.03 0.91 19.18 10.82 17.07 15.04 17.45 34.52 14.99
12 0.828 0.036 0.849 0.426 0.781 0.592 0.797 1.531 0.750
21.03 0.91 21.56 10.82 19.84 15.04 20.24 38.89 19.05
14 0.828 0.036 0.974 0.426 0.906 0.592 0.922 1.656 0.875
21.03 0.91 24.74 10.82 23.01 15.04 23.42 42.06 22.23
16 0.828 0.036 1.099 0.426 1.031 0.592 1.047 1.781 1.000
21.03 0.91 27.91 10.82 26.19 15.04 26.59 45.24 25.40
18 0.828 0.036 1.223 0.426 1.156 0.592 1.172 1.891 1.125
21.03 0.91 31.06 10.82 29.36 15.04 29.77 48.03 28.58
20 0.890 0.036 1.317 0.488 1.250 0.658 1.266 2.031 1.250
22.61 0.91 33.45 12.40 31.75 16.70 32.16 51.59 30.75
22 0.890 0.036 1.443 0.488 1.375 0.686 1.390 2.156 1.375
22.61 0.91 36.65 12.40 34.93 17.42 35.31 54.76 34.93
24 0.890 0.036 1.567 0.521 1.500 0.719 1.516 2.277 1.500
22.61 0.91 39.80 13.23 38.10 18.26 38.51 57.84 38.10
23
Single Hole Fixing
Receptacles
5005
62GB
-
5005
-
10
(RSRE SD/C 235025/X)
Single hole mounting plain shell with PC pin
terminated contacts. Reduced diameter
flange with panel 'O' seal
Size 10 only
A
max B
+0.001
-0.002
(+0.03)
(-0.03)
D
dia.
max
F
+0.002
-0.003
(+0.05)
(-0.08)
K
min max M
-0.005
(-0.13)
N
±0.003
(±0.08)
R
+0.005
(+0.13)
S Y
dia.
max.
X
Thread L
dia
10 0.877 0.065 0.880 0.681 0.062 0.125 0.655 0.659 0.690 1.017 0.590 11/16 – 24 NEF 0.820
22.28 1.65 22.35 17.29 1.58 3.18 16.63 16.47 17.52 25.83 14.99 20.83
5036
62GB
-
5036
-
10
(RSRE SD/C235025/X)
Single hole mounting with circular flange
and P.C. terminations
Size 10 only
Shell
Size A
max B
+0.001
-0.002
(+0.03)
(-0.05)
D
dia.
max
F
+0.002
-0.003
(+0.05)
(-0.08)
Y
dia.
max.
K
min max M
-0.005
(-0.13)
N
±0.003
(±0.08)
R
+0.005
(+0.13)
S X
Thread L
dia
10 0.829 0.066 0.880 0.679 0.590 0.062 0.125 0.655 0.659 0.690 1.017 11/16 – 24 NEF 0.820
21.06 1.67 22.35 17.25 14.99 1.57 3.18 16.63 16.47 17.52 25.83 20.83
24
Single Hole Fixing
Receptacles
5016
62GB
-
5016
-
10
(RSRE SD/C 235025/X)
Single hole mounting plain shell for direct wiring
to exposed solder buckets. Reduced diameter
flange with panel 'O' ring seal
Solder bucket: Size 10 only
Shell
Size A
max B
+0.002
-0.001
(+0.05)
(-0.03)
D
dia.
max
F
+ 0.003
- 0.002
(+ 0.08)
(- 0.05)
K
min max M
- 0.010
(- 0.25)
N
± 0.005
(± 0.13)
R
+ 0.005
(+ 0.13)
S Y
dia.
max.
X
Thread
10 0.902 0.064 0.880 0.678 0.062 0.125 0.655 0.665 0.697 1.359 0.590 11/16 – 24 NEF
22.91 1.62 22.35 17.21 1.58 3.18 16.63 16.89 17.70 34.52 14.99
5024
62GB
-
5024
(RSRE SD/C 35077/X)
Single hole mounting plain shell for direct wiring
to exposed solder buckets. Reduced diameter
flange with panel 'O' ring seal
Solder buckets: Size 8, 12 and 14 only
Shell
Size A
max B
± 0.005
( ± 0.13)
D
dia.
max
F
± 0.005
( ± 0.13)
K
min max M
- 0.005
(- 0.13)
N R
± 0.005 ±0.005
(± 0.13) (± 0.13)
S
min Y
dia.
max
X
Thread
08 0.978 0.117 0.830 0.706 0.062
0.125 0.527 0.540 0.572 1.250 0.473 9/16 - 24 NEF
24.84 2.97 21.08 17.93 1.58 3.18 13.3 13.72 14.53 31.75 12.03
12 0.978 0.117 1.130 0.706 0.062
0.125 0.815 0.828 0.885 1.531 0.750 7/8 - 20 UNEF
24.84 2.97 28.70 17.93 1.58 3.18 20.70 21.03 22.48 38.89 19.05
14 0.978 0.117 1.260 0.706 0.062
0.125 0.939 0.952 1.010 1.656 0.875 1 -20 UNEF
24.84 2.97 32.00 17.93 1.58 3.18 23.85 24.18 25.65 42.06 22.23
25
Single Hole Fixing
Receptacles
5052
62GB
-
5052
-
10
Single hole fixing with circular flange and back
end thread - solder termination
Size 10 only
Shell
Size A
max B
(± 0.05)
(± 0.03)
C
max.
sq.
F
+ 0.003
- 0.002
(+ 0.08)
(- 0.05)
K
min max L M
- 0.005
(- 0.13)
N
± 0.005
(± 0.13)
R
± 0.005
(± 0.13)
S
± 0.005
(± 0.13)
X
Thread
10 0.947 0.062 0.880 0.677 0.062 0.125 0.820 0.650 5/8 – 24 UNEF 0.697 1.359 11/16 – 24 NEF
24.06 1.58 22.35 17.19 1.58 3.18 20.83 16.51 17.70 34.52
5030
62G B
-
5030
Bulkhead mounting receptacle with solder
terminations
Shell
Size A
max B
± 0.005
(± 0.13)
C
± 0.010
(± 0.25)
F
± 0.005
(± 0.13)
L N
Thread
08 0.978 0.094 0.812 0.415 0.563 7/16 - 28 UNEF
24.85 2.39 20.63 10.54 14.30
10 0.978 0.094 0.937 0.415 0.680 9/16 - 24 NEF
24.85 2.39 23.80 10.54 17.28
12 0.978 0.094 1.031 0.415 0.859 11 /16 - 24 NEF
24.85 2.39 26.19 10.54 21.82
14 0.978 0.094 1.125 0.415 0.984 13/16 - 20 UNEF
24.85 2.39 28.58 10.54 25.00
16 0.978 0.094 1.218 0.415 1.108 15/16 - 20 UNEF
24.85 2.39 30.94 10.54 28.15
18 0.978 0.094 1.3121 0.415 1.233 1.1/16 - 18NEF
24.85 2.39 33.33 10.54 31.32
20 1.048 0.102 1.437 0.535 1.358 1.3/16 -18NEF
26.62 2.59 36.50 13.59 34.50
22 1.048 0.102 1.562 0.535 1.483 1.5/16 - 18 NEF
26.62 2.59 39.68 13.59 37.67
24 1.048 0.102 1.687 0.572 1.610 1.7/16 - 18 NEF
26.62 2.59 42.85 14.53 40.90
26
Single Mole Fixing
Receptacles
5065
62G B
-
5065
Single hole mounting with plain shell
and film wire terminations
Shell
Size A
max B
± 0.005
(± 0.13)
C
sq. D
max min F
± 0.005
(± 0.13)
H
max min J
± 0.020
(± 0.51)
K
min max L M N R
-0.005 ±0.005 ±0.005
(-0.13) (±0.13) (±0.13)
S Y X
Thread
08 1.021 0.117 0.942 0.030 0.028
0.706 0.218 0.178
0.060 0.062 0.125
0.750 0.527 0.540 0.572 1 250
0.473 9/16 - 24 NEF
25.94 2.97 23.93 0.76 0.71 17.93 5.54 4.52 1.52 1.58 3.18 19.05 13.3 13.72 14.53 31.75
12.03
10 1.021 0.117 1.067 0.030 0.028
0.706 0.218 0.178
0.060 0.062 0.125
0.875 0.652 0.665 0.697 1.359
0.590 11/16 - 24 NEF
25.94 2.97 27.10 0.76 0.71 17.93 5.54 4.52 1.52 1.58 3.18 22.23 16.56 16.89 17.70 34.52
14.99
12 1.021 0.117 1.255 0.030 0.028
0.706 0.218 0.178
0.060 0.062 0.125
1.062 0.815 0.828 0.885 1.531
0.750 7/8 - 20 UNEF
25.94 2.97 31.88 0.76 0.71 17.93 5.54 4.52 1.52 1.58 3.18 26.98 20.70 21.03 22.48 38.89
19.05
14 1.021 0.117 1.380 0.030 0.028
0.706 0.218 0.178
0.060 0.062 0.125
1.187 0.939 0.952 1.010 1.656
0.875 1 - 20 UNEF
25.94 2.97 35.05 0.76 0.71 17.93 5.54 4.52 1.52 1.58 3.18 30.15 23.85 24.18 25.65 42.06
22.23
16 1.021 0.117 1.505 0.030 0.028
0.706 0.218 0.178
0.060 0.062 0.125
1.312 1.063 1.076 1.135 1.781
1.000 1.1/8 - 18 NEF
25.94 2.97 38.23 0.76 0.71 17.93 5.54 4.52 1 .52 1.58 3.18 33.32 27.00 27.33 28.83 45 24
25.40
18 1.021 0.117 1.630 0.030 0.028
0.706 0.218 0.178
0.060 0.062 0.125
1.437 1.188 1.201 1.260 1.891
1.125 1.1 /4 - 18 NEF
25.94 2.97 41.40 0.76 0.71 17.93 5.54 4.52 1.52 1.58 3.18 36.50 30.18 30.50 32.00 48.03
28.58
20 1.240 0.148 1.817 0.030 0.028
0.894 0.218 0.178
0.060 0.062 0.250
1.562 1.313 1.326 1.385 2.031
1 .250
1.3/8 - 18 NEF
31.50 3.76 46.15 0.76 0.71 22.71 5.54 4.52 1.52 1.58 6.35 38.68 33.35 33.68 35.18 51.59
31.75
22 1.240 0.148 1942 0.030 0.028
0.894 0.218 0.178
0.060 0.062 0.250
1.687 1.438 1.451 1.510 2.156
1.375 1.1/2 - 18 NEF
31 .50
3.76 49.33 0.76 0.71 22.71 5.54 4.52 1 .52 1.58 6.35 42.85 36.53 36.855 38.35
54.76
34.93
24 1.273 0.148 2.067 0.030 0.028
0.927 0.218 0.178
0.060 0.062 0.250
1.812 1.563 1.576 1.635 2.277
1 .500
1.5/8 - 18 NEF
32.34 3.76 52.50 0.76 0.71 23.55 5.54 4.52 1.52 1.58 6.35 46.05 39.70 40.03 41.45 57.84 38.10
5067
62GB
-
5067
Single hole mounting with plain shell
and film wire terminations
Shell
Size A
max B
± 0.005
(± 0.13)
C
max
sq
D
max min F
± 0.005
(± 0.13)
H
max min J
± 0.012
(± 0.30)
K
min max L M N R
-0.005 ±0.005 ±0.005
(-0.13) (±0.13) (±0.13)
S Y X
Thread
08 1.095 0.117 0.942 0.030 0.028
0.706 0.262 0.230
0.049 0.062
0.125 0.750 0.527 0.540 0.572 1.250 0.473 9/16 - 24 NEF
27.81 2.97 23.93 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03
10 1.095 0.117 1.067 0.030 0.028
0.706 0.262 0.230
0.049 0.062
0.125 0.875 0.652 0.665 0.697 1.359 0.590 11/16 - 24 NEF
27.81 2.97 27.10 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99
12 1.095 0.117 1.255 0.030 0.028
0.706 0.262 0.230
0.049 0.062
0.125 1.062 0.815 0.828 0.885 1.531 0.750 7/8 - 20 UNEF
27.81 2.97 31.88 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 26.98 20.70 21.03 22.50 38.89 19.05
14 1.095 0.117 1.380 0.030 0.028
0.706 0.262 0.230
0.049 0.062
0.125 1.187 0.939 0.952 1.010 1.656 0.875 1 - 20 UNEF
27.81 2.97 35.10 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23
16 1.095 0.117 1.505 0.030 0.028
0.706 0.262 0.230
0.049 0.062
0.125 1.312 1.063 1.076 1.135 1.781 1.000 1.1/8 -18 NEF
27.81 2.97 38.23 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 33.23 27.00 27.33 28.83 45.24 25.40
18 1.095 0.117 1.630 0.030 0.028
0.706 0.262 0.230
0.049 0.062
0.125 1.437 1.188 1.201 1.260 1.891 1.125 1.1 /4 - 18 NEF
27.81 2.97 41.40 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 36.50 30.18 30.51 32.00 48.03 28.58
20 1.309 0.148 1.817 0.030 0.028
0.894 0.262 0.230
0.049 0.062
0.250 1.562 1.313 1.326 1.385 2.031 1 .250
1.3/8 -18 NEF
33.24 3.76 46.15 0.76 0.71 22.71 6.66 5.85 1.24 1.58 6.35 38.68 33.35 33.68 35.18 51.59 31.75
22 1.309 0.148 1.942 0.030 0.028
0.894 0.262 0.230
0.049 0.062
0250 1.687 1.438 1.451 1.510 2.156 1.375 1.1/2 -18 NEF
33.24 3.76 49.33 0.76 0.71 22.71 6.66 5.85 1.24 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93
24 1.342 0.148 2.067 0.030 0.028
0.927 0.262 0.230
0.049 0.062
0.250 1.812 1.563 1.576 1.635 2.277 1.500 1.5/8 -18 NEF
34.08 3.76 52.50 0.76 0.71 23.55 6.66 5.85 1.24 1.58 6.35 46.03 39.07 40.03 41.59 57.84 38.10
27
Cable Moun
ting
Receptacles
Table of Styles
62GB
-
51T
62GB
-
11A
62GB
-
11E
62GB
-
11F
62GB
-
11J
62GB
-
11P
Page No.
29
29
30
30
31
31
28
Cable Mounting
Receptacles
51T
62GB
-
51T
Basic cable mounting receptacle with
threaded shell to accept standard cable
accessories.
Shell
Size A
max B
± 0.005
(± 0.13)
C
max
sq
F
± 0.005
(± 0.13)
Y
dia
max
X
Thread
08 0.978 0.094 0.817 0.415 0.473 7/16 - 28 UNEF
24.84 2.39 20.75 10.54 12.03
10 0.978 0.094 0.942 0.415 0.590 9/16 - 24 NEF
24.84 2.39 23.93 10.54 14.99
12 0.978 0.094 1.036 0.415 0.750 11 /16 - 24 NEF
24.84 2.39 26.32 10.54 19.05
14 0.978 0.094 1.130 0.415 0.875 13/16 - 20 UNEF
24.84 2.39 28.70 10.54 22.23
16 0.978 0 094 1.223 0.415 1.000 15/16 - 20 UNEF
24.84 2.39 31.07 10.54 25.40
18 0.978 0.094 1.317 0.415 1.125 1.1/16 -18 NEF
24.84 2.39 33.45 10.54 28.58
20 1.048 0.102 1.442 0.535 1.250 1 .3/16 -18 NEF
26 62 2.59 36.63 13.59 31.75
22 1.048 0.102 1.567 0.535 1.375 1.5/16 -18 NEF
26.62 2.59 39.80 13.59 34.93
24 1.048 0.102 1.692 0.560 / 0.574 1.500 1.7/16 -18 NEF
26.62 2.59 42.98 14.23 / 14.58 38.10
11A
62GB
-
11A
Cable mounting receptacle with general
duty back shell. No grommet supplied.
Shell
Size A
max B
± 0 005
(± 0.13)
C
max
sq
F
± 0.005
(± 0.13)
G
dia
max
Y
Dia
max
M
Thread
08 1.624 0.094 0.817 0.415 0.561 0.473 1/2 - 28 UNEF
41.25 2.39 20.75 10.54 14.25 12.03
10 1 .624 0.094 0.942 0.415 0.686 0.590 5/8 - 24 NEF
41.25 2.39 23.93 10.54 17.43 14.99
12 1.624 0.094 1.036 0.415 0.811 0.750 3/4 - 20 UNEF
41.25 2.39 26.32 10.54 20.60 19.05
14 1.624 0.094 1.130 0.415 0.936 0.875 7/8 - 20 UNEF
41.25 2.39 28.70 10.54 23.78 22.23
16 1.624 0.094 1.223 0.415 1.061 1.000 1 – 20 UNEF
41.25 2.39 31.07 10 54 26.95 25.40
18 1.624 0.094 1.317 0.415 1.186 1.125 1.3/16 – 18 NEF
41.25 2.39 33.45 10.54 30.13 28.58
20 1.687 0 104 / 0.100 1.442 0.535 1.311 1.250 1 3/16 -18 NEF
42.85 2.64 / 2.55 36.63 13.59 33.30 31.75
22 1.687 0.104 / 0.100 1.567 0.535 1.436 1.375 1.7/16 -18 NEF
42.85 2.64 / 2.55 39.80 13.59 36.75 34.93
24 1.730 0.104 / 0.100 1.692 0.569 / 0.574 1.561 1.500 1.7/16 -18 NEF
43.94 2.64 / 2.55 42.98 14.45 / 14.58 39.65 38.10
29
Cable Mounting
Receptacles
11E
62GB
-
11E
MIL-C-26482 MS3111E
Cable mounting receptacle with grommet
and grommet nut
Shell
Size A
max B
± 0.005
(± 0.13)
C
max
sq
F
± 0.005
(± 0.13)
G
dia
max
Y
dia
max
08 1.281 0.094 0.817 0.415 0.561 0.473
32.54 2.39 20.75 10.54 14.25 12.03
10 1.281 0.094 0.942 0.415 0.686 0.590
32.54 2.39 23.93 10.54 17.43 14.99
12 1.281 0.094 1.036 0.415 0.811 0.750
32.54 2.39 26.32 10.54 20.60 19.05
14 1.281 0.094 1.130 0.415 0.936 0.875
32.54 2.39 28.70 10.54 23.78 22.23
16 1.281 0.094 1.223 0.415 1.061 1.000
32.54 2.39 31.07 10.54 26.95 25.40
18 1.281 0.094 1.317 0.415 1.186 1.125
32.54 2.39 33.45 10.54 3013 28.58
20 1.383 0.102 1.442 0.535 1.311 1.250
35.13 2.59 36.63 13.59 33.30 31.75
22 1.383 0.102 1.567 0.535 1.436 1.375
35.13 2.59 39.80 13.59 36.75 34.93
24 1.383 0.102 1.692 0.569 / 0.574 1.561 1.500
35.13 2.59 42.98 14.45 / 14.58 39.65 38.10
62GB
-
11F
MIL-C-26482 MS3111F
Cable mounting receptacle with
grommet and grommet nut fitted with
integral strain relief clamp
Shell
Size A
max B
± 0.005
(± 0.13)
C
max
sq
F
± 0.005
(± 013)
G
dia
max
H
± 0.005
(± 0.13)
Y
dia
max
08 1.762 0.094 0.817 0.415 0.828 0.156 0.473
44.75 2.39 20.75 10.54 21.03 3.96 12.03
10 1.762 0.094 0.942 0 415 0.891 0.188 0.590
44.75 2.39 23.93 10.54 22.63 4.78 14.99
12 1.762 0.094 1.036 0.415 1.016 0.312 0.750
44.75 2.39 26.32 10.54 25.81 7.93 19.05
14 1.736 0.094 1.130 0.415 1.141 0.375 0.875
44.10 2.39 28.70 10.54 28.97 9.53 22.23
16 1.876 0.094 1.223 0.415 1.203 0.500 1.000
47.65 2.39 31.07 10.54 30.56 12.7 25.40
18 1.876 0.094 1.317 0.415 1.426 0.625 1.125
47.65 2.39 33.45 10.54 36.22 15.88 28.58
20 2.118 0.104 / 0.100 1.442 0.535 1 .426 0.625 1.250
53.80 2.64 / 2.55 36.63 13.59 36.22 15.88 31.75
22 2.118 0.104 / 0.100 1.567 0.535 1.567 0.750 1.375
53.80 2.64 / 2.55 39.80 13.59 39.80 19.05 34.93
24 2.250 0.104 / 0.100 1.692 0.569 / 0.574 1.735 0.800 1.500
57.15 2.64 / 2.55 42.98 14.45 / 14.58 44.07 20.32 38.10
11F
30
Cable Mounting
Receptacles
11J
62GB
-
11J
With cable clamp for unscreened
jacketed cable. No grommet supplied
Shell
Size A
max B
± 0.005
(± 0.13)
C
max
sq
F
± 0.005
(± 0.13)
G
dia
max
Y
dia
max
min
closed Z
max
free
08 1.846 0.094 0.817 0.415 0.561 0.473 0.168 0.230
46.89 2.39 20.75 10.54 14.25 12.03 4.28 5.84
10 1.846 0.094 0.942 0.415 0.686 0.590 0.205 0.312
46.89 2.39 23.93 10.54 17.43 14.99 5.21 7.93
12 1.947 0.094 1.036 0.415 0.811 0.750 0.338 0.442
49.45 2.39 26.32 10.54 20.60 19.05 8.59 11.23
14 2.147 0.094 1.130 0.415 0.936 0.875 0.416 0.539
54.54 2.39 28.70 10.54 23.78 22.23 10.57 13.69
16 2.347 0.094 1.223 0.415 1.061 1.000 0.550 0.616
59.61 2.39 31.07 10.54 26.95 25.40 13.97 15.65
18 2.547 0.094 1.317 0.415 1.186 1.125 0.600 0.672
64.70 2.39 33.45 10.54 30.13 28.58 15.24 17.07
20 2.831 0.102 1.442 0.535 1.311 1.250 0.635 0.747
71.91 2.59 36.63 13.59 33.30 31.75 16.13 18.98
22 3.031 0.102 1.567 0.535 1.436 1.375 0.670 0.846
76.99 2.59 39.80 13.59 36.75 34.93 17.02 21.49
24 3.074 0.102 1.692 0.569 / 0.574 1.561 1.500 0.740 0.894
78.03 2.59 42.98 14.45 / 14.58 39.65 38.10 18.80 22.71
11P
62GB
-
11P
MIL-C-26482 MS3111P
For potted se
al supplied complete with
detachable potting mould and location ring
Shell
Size A
max 8
± 0.005
(± 0.13)
C
max
sq
F
± 0.005
(± 0.13)
G
dia
max
Y
dia
max
Z
min
08 1.316 0.094 0.817 0.415 0.572 0.473 0.260
33.43 2.39 20.75 10.54 14.53 12.03 6.60
10 1.425 0.094 0.942 0.415 0.666 0.590 0.463
36.20 2.39 23.93 10.54 16.92 14.99 11.76
12 1.394 0.094 1.036 0.415 0.822 0.750 0.557
35.41 2.39 26.32 10.54 20.88 19.05 14.15
14 1.394 0.094 1.130 0.415 0.907 0.875 0.590
35.41 2.39 28.70 10.54 23.04 22.23 14.99
16 1.394 0.094 1.223 0.415 1.040 1.000 0.713
35.41 2.39 31.07 10.54 26.42 25.40 18.11
18 1.394 0.094 1.317 0.415 1.165 1.125 0.835
35.41 2.39 33.45 10.54 29.59 28.58 22.21
20 1.612 0.102 1.442 0.535 1.285 1.250 1.015
40.95 2.59 36.63 13.59 32.64 31.75 25.78
22 1.612 0.102 1.567 0.535 1.400 1.375 1.015
40.95 2.59 39.80 13.59 35.56 34.93 25.78
24 1.674 0.102 1.692 0.569 / 0.574 1.540 1.500 1.265
42.52 2.59 42.98 14.45 / 14.58 39.12 38.10 32.13
31
Plugs
Table of Styles
62GB-56T
62GB-56TG
62GB-16A
62GB-56T
(046)
62GB-16E
62GB-16F
62GB-16P
Page No.
34
34
35
35
36
36
37
32
Plugs
Table of Styles
62GB
-
16J
62GB
-
5039
-
10
62GB
-
5055
-
10
62GB
-
5056
-
10
62GB
-
5074
Page No.
37
38
38
38
39
33
Plugs
56T
62GB
-
56T
Basic plug with threaded shell to accept
standard cable accessories
Shell
Size A
Max C
max X
Thread
08 0.976 0.750 7/16 - 28 UNEF
24.79 19.05
10 0.976 0.859 9/16 - 24 NEF
24.79 21.82
12 0.976 1.031 11/16 -24NEF
24.79 26.19
14 0.976 1.156 13/16 - 20 UNEF
24.79 29.36
16 0.976 1.281 15/16 - 20 UNEF
24.79 32.54
18 0.976 1.391 1.1 /16 - 18 NEF
24.79 35.33
20 &976 1.531 1.3/16 - 18 NEF
24.79 38.89
22 0.976 1.656 1.5/16 - 18 NEF
24.79 42.06
24 0.976 1.777 1.7/16 - 18 NEF
24.79 45.14
56TG
62GB
-
56TG
Basic plug with threaded shell to accept
standard cable accessories. Has shell
grounding spring fingers
Shell
Size A
max C
max X
Thread
08 0.976 0.750 7/16 - 28 UNEF
24.79 19.05
10 0.976 0.859 9/16 - 24 NEF
24.79 21.82
12 0.976 1.031 11/16 – 24 NEF
24,79 26.19
14 0.976 1.156 13/16 – 20 UNEF
24.79 29.36
16 0.976 1.281 15/16 - 20 UNEF
24.79 32.54
18 0.976 1.391 1.1 /16 - 18 NEF
24.79 35.33
20 0.976 1.531 1.3/16 - 18 NEF
24.79 38.89
22 0.976 1.656 1.5/16 - 18 NEF
24.79 42.06
24 0.976 1.777 11/16 - 18 NEF
24.79 45.14
34
Plugs
16A
62GB
-
1 6A
Plug with general duty back shell.
No grommet provided.
Shell
Size
A
max C
max
G
max
M
Thread
08 1.614 0.750 0.561 1/2 - 28 UNEF
41.00 19.05 14.25
10 1.614 O.859 0,686 5/8 - 24 NEF
41.00 21.82 17.43
12 1.614 1.031 0.811 3/4 - 20 UNEF
41.00 26.19 20.60
14 1.614 1,156 0.936 7/8 - 20 UNEF
41.00 29.36 23.78
16 1.614 1.281 1.061 1 - 20 UNEF
41.00 32.54 26.95
18 1.614 1.391 1.186 1.3/16 -18 NEF
41.00 35.33 30.13
20 1.614 1.531 1.311 1.3/16 - 18 NEF
41.00 38-89 33.30
22 1.614 1.656 1.436 1.7/16 - 18 NEF
41.00 42.06 36.75
24 1.658 1.777 1.561 1.7116 - 18 NEF
42.11 45.14 39.65
56T
62GB
-
56T(046)
Box-mounting plug. Available for shell size 16:
other sizes to special order. Cable accessories
cannot be fitted.
Shell
Size
A
max
J
max
K
L
16 1.042 1.317 1,000 6.32 NC
26.47 33.45 25.40
20 1.042 1.625 1.250 6.32 NC
26.47 41.28 31.75
22 1.042 1.625 1.250 6.32 NC
26.47 41.28 31.75
35
16E
62GB
-
16E
MIL - C26482 MS3116E
Plug with grommet and grommet
nut
Shell
Size A
max C
max G
max
08 1.281 0.750 0.561
32.54 1.05 14.25
10 1.281 0.859 0.686
32.54 21.82 17.431
12 1.281 1.031 0.811
32.54 26.19 20.60
14 1.281 1.156 0.936 I
32.54 29.36 23.78
16 1.281 1.281 1.061
32.54 32.54 26.95
18 1.281 1.391 1.186
32.54 35.33 30.13
20 1.281 1.531 1 .311
32.54 38.89 33.30
22 1.281 1.656 1.436
32.54 42.06 36.75
24 1.281 1.777 1.561
32.54 45.14 39.65
16F
62GB
-
16F
MIL - C26482 MS3116F
Plug with grommet and grommet nut fitted with
integral strain relief clamp.
Shell
Size A
max C
dia
max
G
dia
max
H
± 0.005
(± 0.13)
08 1.752 0.750 0.828 0.156
44.50 19.05 21.03 3.96
10 1.752 0.859 0.891 0.188
44.50 21.82 22.63 4.78
12 1.752 1.031 1.016 0.312
44.50 26.19 25.81 7.93
14 1.726 1.156 1.141 0.375
43.84 29.36 28.97 9.53
16 1.866 1.281 1.203 0.500
47.40 32.54 30.56 12.70
18 1.866 1.391 1.426 0.625
47.40 35.33 36.22 15.88
20 2.040 1.531 1.426 0.625
51 .81 38.89 36.22 15.88
22 2.040 1.656 1.567 0.750
51.81 42.06 39.80 19.05
24 2.178 1.777 1.735 0.800
55.32 45.14 44.07 20.32
Plugs
36
16P
62GB
-
16P
MIL-C26482 MS3116P
For potted seal. Supplied complete with
detachable potting mould and location ring.
Shell
Size A
max C
max G
max Z
min
08 1.306 0.750 0.572 0.260
33.17 19.05 14.53 6.60
10 1.415 0.859 0.666 0.463
35.94 21.82 16.92 11.76
12 1.384 1.031 0.822 0.557
35.15 26.19 20.88 14.14
14 1.384 1.156 0.907 0.590
35.15 29.36 23.04 14.99
16 1.384 1.281 1.040 0.713
35.15 32.54 26.41 18.11
18 1.384 1.391 1.165 0.835
35.15 35.33 29.59 22.21
20 1.539 1.531 1.285 1.015
39.09 38.89 32.64 25.78
22 1.539 1.656 1.400 1.015
39.09 42.06 35.56 25.78
24 1.602 1.777 1.540 1265
40.69 45.14 39.12 32.13
16J
62GB
-
16J
Plug with cable clamp for unscreened
jacketed cable. No grommet supplied.
Shell
Size A
max C
max G
max Z
min max
08 1.836 0.750 0.561 0.168 0.230
46.64 19.05 14.25 4.28 5.84
10 1.836 0.859 0.686 0.205 0.312
46.64 21.82 17.43 5.21 7.93
12 1.937 1.031 0.811 0.388 0.442
49.20 26.19 20.60 8.59 11.23
14 2.137 1.156 0.936 0.416 0.539
54.28 29.36 23.78 10.57 13.69
16 2.337 1.281 1.061 0.550 0.616
59.36 32.54 26.95 13.97 15.65
18 2.537 1.391 1.186 0.600 0.672
64.45 35.33 30.13 15.24 17.07
20 2.758 1.531 1.311 0.635 0.747
70.05 38.89 33.30 16.13 18.98
22 2.958 1.656 1.436 0.670 0.846
75.13 42.06 36.75 17.02 21.49
24 3.002 1.777 1.561 0.740 0.894
76.25 45.14 39.65 18.80 22.71
Plugs
37
5039
62GB
-
5039
-
10
SD/C 235 155 - X
SD/C 235 156 - X
Low profile, solder termination plug with 90°
screened cable outlet.
Shell
Size A
max B
max C
max D
max
10 1.473 0.500 0.980 1.500
37.41 12.70 24.89 38.10
5055
62GB
-
5055
-
10
SD/2 235 193
-
X
Low profile solder termination plug with size 12
90°screened cable outlet.
Shell A B C D
Size max max max max
10 1.800 0.655 0.980 1.800
45.72 16.64 24.89 45.72
5056
62GB
-
5056
-
10
Audio plug with solder termination
Shell
Size A
max B
max C
max
10 2.375 0.979 / 0.969 0.310
60.33 24.87 / 24.61 7.87
Plugs
38
5074
62GB
-
5074
Flange mounting push/pull plug with threaded shell t
o
accept standard cable accessories.
Shell
Size A
max B
max C L
10 0.912 1.125 0.866 9/16 - 24 NEF
23.17 28.57 22.00
12 0.912 1.218 0.969 9/16 - 24 NEF
23.17 30.93 24.61
14 0.912 1.312 1.062 9/16 - 24 NEF
23.17 33.32 26.97
Plugs
39
Accessories
Table of Styles
62GB
-
736
62GB
-
737
62GB
-
738
62GB
-
742
62GB
-
810
62GB
-
812
62GB
-
813
Page No.
42
42
43
43
44
44
45
40
Accessories
Table of Styles
62GB
-
814
62GB
-
997
62GB
-
998
62GB
-
1069
62GB
-
1070
62GB
-
760
Page No.
45
46
46
47
47
48
41
Accessories
736
62GB
-
736
Caps and chains for single hole mounting
receptacles
Shell
Size A
± 0.25
(± 6.35)
B
± 0.005
(± 0.13)
C
dia
max
J
± 0.005
(± 0,127)
08 3.0 0.521 0.734 0.578
76.2 13.23 18.64 14.68
10 3.0 0.521 0.859 0.703
76.2 13.23 21.82 17.86
12 3.5 0.521 1.000 0.891
88.9 13.23 25.4 22.63
14 3.5 0.521 1.125 1.016
88.9 13.23 28.57 25.81
16 3.5 0.521 1.250 1.141
88.9 13.23 31.75 29.39
18 3.5 0.521 1.375 1.266
88.9 13.23 34.92 32.16
20 4.0 0.521 1.500 1.391
101.6 13.23 38, 1 35.33
22 4.0 0.521 1.625 1.516
101.6 13.23 41.27 38.51
24 4.0 0.556 1.750 1 .641
101.6 14.12 44.45 41.68
737
62GB
-
737
Caps and chains for cable mounting
receptacles.
Shell
Size A
± 0.25
(± 6.35)
B
± 0.005
( ± 0.13)
C
dia
max
J
± 0.005
(± 0.127)
08 3.0 0.521 0.734 0.458
76.2 13.23 18.64 11.63
10 3.0 0.521 0.859 0.583
76.2 13.23 21.82 14.81
12 3.5 0.521 1.000 0.708
88.9 13.23 25.4 17.98
14 3.5 0.521 1.125 0.896
88.9 13.23 28.57 22.76
16 3.5 0.521 1.250 1.021
88.9 13.23 31.75 25.93
18 3.5 0.521 1.375 1.146
88.9 13.23 34.92 29.11
20 4.0 0.521 1.500 1.271
101.6 13.23 38.1 32.28
22 4.0 0.521 1.625 1.396
101.6 13.23 41.27 35.46
24 4.0 0.556 1.750 1.521
101.6 14.12 44.45 38.63
42
Accessories
738
62GB
-
738
Caps and chains for flange mounting
receptacles.
Shell
Size A
± 0.25
(± 6.35)
B
± 0.005
(± 0.13)
C
dia
max
J
± 0.005
(± 0.127)
08 3.0 0.521 0.734 0.125
76.2 13.23 18.64 3.18
10 3.0 0.521 0.859 0.125
76.2 13.23 21.82 3.18
12 3.5 0.521 1.000 0.125
88.9 13.23 25.4 3.18
14 3.5 0.521 1.125 0.125
88.9 13.23 28.57 3.18
16 3.5 0.521 1.250 0.125
88.9 13.23 31. 75 3.18
18 3.5 0.521 1.375 0.125
88.9 13.23 34.92 3.18
20 4.0 0.521 1.500 0.125
101.6 13.23 38.1 3.18
22 4.0 0.521 1.625 0.125
101.6 13.23 41.27 3.18
24 4.0 0.556 1.750 0.152
101.6 14.12 44.45 3.86
742
62GB
-
742
Caps and chains for plugs.
Shell
Size A
± 0.25
( ± 6.35)
B
± 0.005
( ± 0.13)
C
dia
max
J
± 0.005
( ± 0.127)
08 3.0 0.522 0.719 0.125
76.2 13.25 18.26 3.18
10 3.0 0.522 0.844 0.125
76.2 13.25 21.43 3.18
12 3.5 0.522 1.000 0.125
88.9 13.25 25.4 3.18
14 3.5 0.522 1.125 0.125
88.9 13.25 28.57 3.18
16 3.5 0.522 1.250 0.125
88.9 13.25 31.75 3.18
18 3.5 0.522 1.357 0.125
88.9 13.25 34.92 3.18
20 4.0 0.584 1.500 0.125
101.6 14.83 38.1 3.18
22 4.0 0.584 1.625 0.125
101.6 14.83 41.27 3.18
24 4.0 0.617 1.750 0.152
101.6 15.67 44.45 3.86
43
Accessories
810
62GB
-
810
Caps and cords for plugs
Shell
Size A
± 0.25
(± 6.35)
B
± 0.005
(± 0.13)
C
dia
max
J
± 0.003
(± 0.08)
08 3.0 0.522 0.719 0.145
76.2 13.25 18.26 3.68
10 3.0 0.522 0.844 3.685
76.2 13.25 21.43 3.68
12 3.5 0.522 1.000 0.145
88.9 13.25 25.4 3.68
14 3.5 0.522 1.125 0.145
88.9 13.25 28.57 3.68
16 3.5 0.522 1.250 0.145
88.9 13.25 31.75 3.68
18 3.5
88.9 0.522
13.25 1.375
34.93 0.145
3.68
20 4.0 0.584 1.500 0.145
101.6 14.83 38.1 3.68
22 4.0 0.584 1.625 0.145
101.6 14.83 41.27 3.68
24 4.0 0.617 1.750 0.171
101.6
15.67
44.45
4.34
812
62GB
-
812
Caps and cords for flange mounting
receptacles.
Shell
Size A
± 0.25
(± 6.35)
B
± 0.005
(± 0.13)
C
dia
max
J
± 0.003
(± 0.08)
08 3.0 0.521 0.734 0.145
76.2 13.23 18.64 3.68
10 3.0 0.521 0.859 0.145
76.2 13.23 21.82 3.68
12 3.5 0 521 1 .000 0.145
88.9 13.23 25.4 3.68
14 3.5 0.521 1.125 0.145
88.9 13.23 28.57 3.68
16 3.5 0.521 1 .250 0.145
88.9 13.23 31.75 3.68
18 3.5 0.521 1.375 0.145
88.9 13.23. 34.92 3.68
20 4.0 0.521 1.500 0.145
101.6 13.23 38.1 3.68
22 4,0 0.521 1.625 0.145
101.6 13.23 41.27 3.68
24 4.0 0.556 1.750 0.171
101 .6 14.12 44.45 4.34
44
Accessories
813
62GB
-
813
Caps and cords for single hole mounting
receptacles.
Shell
Size A
± 0.25
(± 6.35)
B
± 0.005
(± 0.13)
C
max J
+ 0.010
(+ 0.25)
08 3.0 0.521 0.734 0.578
76.2 13.23 18.64 14.68
10 3.0 0.521 0.859 0.703
76.2 13.23 21.82 17.86
12 3.5 0.521 1.000 0.891
88.9 13.23 25.4 22.63
14 3.5 0.521 1.125 1.016
88.9 13.23 28.57 25.81
16 3.5 0.521 1.250 1.141
88.9 13.23 31.75 29.39
18 3.5 0.521 1.375 1.266
88.9 13.23 34.92 32.16
20 4.0 0.521 1.500 1.391
101.0 13.23 38.1 35.33
22 4.0 0.521 1.625 1.516
101.6 13.23 41.27 38.56
24 4.0 0.556 1.750 1.641
101.6 14.12 44.45 41.68
814
62GB
-
814
Caps and cords for cable mounting receptacles.
Shell
Size A
± 0.25
( ± 6.35)
B
± 0.005
( ± 0.13)
C
max J
+0.010
( + 0.25)
08 3.0 0.521 0.734 0.453
76.2 13.23 18.64 11.50
10 3.0 0.521 0.859 0.578
76.2 13.23 21.82 14.64
12 3.5 0.521 1.000 0.703
88.9 13.23 25.4 17.85
14 3.5 0.521 1.125 0.891
88.9 13.23 28.57 22.63
16 3.5 0.521 1.250 1.016
88.9 13.23 31.75 25.80
18 3.5 0.521 1.375 1.141
88.9 13.23 34.92 28.98
20 4.0 0.521 1.500 1.266
101.6 13.23 38.1 32.15
22 4.0 0.521 1.625 1.391
101.6 13.23 41.27 35.33
24 4.0 0.556 1.750 1.516
101.6 14.12 44.45 38.50
45
Accessories
997
62
GB
-
997
Caps and chains ribbed for single hole
mounting receptacles.
Shell
Size A
± 0.25
(± 6.35)
B
± 0.005
( ± 0.13)
C
dia
max
J
+ 0.010
( + 0.25)
08 3.0 0.521 0.892 0.578
76.2 13.23 22.66 14.69
10 3.0 0.521 1.017 0.703
76.2 13.23 26.84 17.86
12 3.5 0.521 1.142 0.891
88.9 13.23 29.01 22.64
14 3.5 0.521 1.267 1.016
88.9 13.23 32.19 25.81
16 3.5 0.521 1.454 1.141
88.9 13.23 36.94 28.99
18 3.5 0.521 1.563 1.266
88.9 13.23 39.70 32.16
20 4.0 0.521 1.687 1.391
101.6 13.23 42.85 35.34
22 4.0 0.521 1.797 1.516
101.6 13.23 45.65 38.51
24 4.0 0.556 1.922 1.641
101.6 14.12 48.82 41.69
998
62GB
-
998
Caps and chains ribbed for plugs.
Shell
Size A
± 0.25
(± 6.35)
g
max C
dia
max
J
± 0.005
( ± 0.13)
08 3.0 0.562 0.892 0.125
76.2 1428 22.66 3.18
10 3.0 0.562 1.017 0.125
76.2 14.28 25.84 3.18
12 3.5 0.562 1.142 0.125
88.9 1428 29.01 3.18
14 3.5 0.562 1.267 0.125
88.9 14.28 32.19 3.18
16 3.5 0.562 1.454 0.125
88.9 14.28 36.94 3.18
18 3.5 0.562 1.563 0.125
88.9 14.28 39.70 3.18
20 4.0 0.624 1.687 0.125
101 .6 15.85 42.85 3.18
22 4.0 0.624 1.797 0.125
101.6 15.85 45.65 3.18
24 4.0 0.624 1.922 0.147
101.6 15.85 48.82 3.74
46
Accessories
1069
62GB
-
1069
Caps and cords ribbed for single hole
mounting receptacles.
Shell
Size A
± 0.25
(± 6.35)
B
±.0.005
( ± 0.13)
C
dia
max
J
+ 0.010
( + 0.25)
08 3.0 0.521 0.892 0.578
76.2 13.23 22.66 14.69
10 8.0 0.521 1.017 0.703
76.2 13.23 26.84 17.86
12 3.5 0.521 1.142 0.891
88.9 13.23 29.01 22.64
14 3.5 0.521 1.267 1.016
88.9 13.23 32.19 25.81
16 3.5 0.521 1.454 1.141
88.9 13.23 36.94 28.99
18 3.5 0.521 1.563 1.266
88.9 13.23 39.70 32.16
20 4.0 0.521 1.687 1.391
101.6 13.23 42.85 35.34
22 4.0 0.521 1.797 1.516
101.6 13.23 45.65 38.51
24 4.0 0.556 1.922 1.641
101.6 14.12 48.82 41.686
1070
62GB
-
1070
Caps and cords ribbed for flange mounting
receptacles.
Shell
Size A
± 0.25
(± 6.35)
B
± 0.005
( ± 0.13)
C
Dia
max
J
± 0.005
(± 0.13)
08 3.0 0.521 0.892 0.117
76.2 13.23 22.66 3.03
10 3.0 0.521 1.017 0.119
76.2 13.23 22.66 3.03
12 3.5 0.521 1.142 0.119
88.9 13.23 29.01 3.03
14 3.5 0.521 1.267 0.119
88.9 13.23 32.19 3.03
16 3.5 0.521 1.454 0.119
88.9 13.23 36.94 3 03
18 3.5 0.521 1.563 0.119
88.9 13.23 39.70 3.03
20 4.0 0.521 1.687 0.119
101.6 13.23 42.85 3.03
22 4.0 0.521 1.797 0.119
101.6 13.23 45.65 3.03
24 4.0 0.556 1.922 0.147
101.6 14.12 48.82 3.74
47
Accessories
760
62GB
-
760
Flange mounting gasket for box
mounting and hermetic receptacles.
Shell
Size 0
± 0.010
(± 0.254)
E
± 0.010
(± 0.254)
F
± 0.008
(± 0.20)
G
+ 0.010
(+ 0.254)
H
08 0.812 0.594 0.508 0.130 0.042 / 0.016
20.62 15.08 12.90 3.30 1.06 / 0.40
10 0.938 0.719 0.633 0.130 0.042 / 0.016
23.82 18.26 16.07 3.30 1.06 / 0.40
12 1.031 0.813 0.758 0.130 0.042 / 0.016
26.18 20.65 19.25 3.30 1.06 / 0.40
14 1.125 0.906 0.883 0.130 0.042 / 0.016
28.57 23.01 22.42 3.30 1.06 / 0.40
16 1.219 0.969 1.008 0.130 0.042 / 0.016
30.96 24.61 25.60 3.30 1.06 / 0.40
18 1.312 1.063 1.133 0.130 0.042 / 0.016
33.32 27.00 28.77 3.30 1.06 / 0.40
20 1.438 1.156 1.258 0.130 0.042 / 0.016
36.52 29.36 31.95 3.30 1.06 / 0.40
22 1.563 1.250 1.383 0.130 0.042 / 0.016
39.70 31.75 35.13 3.30 1.06 / 0.40
24 1.688 1.375 1.508 0.156 0.042 / 0.016
42.87 34.92 38.30 3.96 1.06 / 0.40
48
Cable Accessories
Table of Styles
62GB
-
584
62GB
-
585
62GB
-
586
62GB
-
587
62GB
-
711
62GB
-
720
62GB
-
776
Page No.
51
51
52
52
53
53
54
49
Cable Accessories
Table of Styles
62GB
-
1225
62GB
-
5028
Page No.
54
55
50
Cable Accessories
584
62GB
-
584
-
XX
-
XXS or P
Grommet seal and nut. Provides an
environmental seal for the exposed solder
buckets in the open back class T shells. Suffix XX - XXS or P enables grommet to be matched to the insert
arrangement.
Shell
Size A G
max
08 0.545 0.561
13.84 14.25
10 0.545 0.686
13.84 17.43
12 0.545 0.811
13.84 20.60
14 0.545 0.936
13.84 23.78
16 0.545 1.061
13.84 26.95
18 0.545 1.186
13.84 30.13
20 0.545 1.311
13.84 33.30
22 0.545 1.436
13.84 36.75
24 0.501 1.561
12.73 39.65
585
62G B
-
585
-
XX
-
XXS or P
A2103
Grommet and nut with strain relief clamp. The
clamp prevents the flexing of the wires in the
immediate vicinity of the risers, so avoiding
the risk of leaks. Suffix XX - XXS or P enables grommet to be matched to the insert
arrangement.
Shell
Sine A
max G
max max
08 0.991 0 828 0.161
25.17 21.03 4.09
10 0.991 0.891 0.193
25.17 22.63 4.90
12 0 991 1.016 0.317
25.17 25.81 8.05
14 0.965 1.141 0.380
24.51 28.98 9.65
16 1.105 1.203 0.505
28.07 30.56 12.83
18 1.105 1.426 0.630
28.07 36.22 16.00
20 1.285 1.426 0.630
32.64 36.22 16.00
22 1.285 1.567 0.755
32.64 39.80 19.18
24 1.373 1.735 0.805
34.88 44.07 20.45
51
Cable Accessories
586
62G B
-
586
-
XX
Potting mould and ring,
supplied together as a set.
Suffix XX specifies shell size.
Shell
Size A
max G
max Z
min
08 0.644 0.585 0.260
16.36 14.85 6.60
10 0.753 0.679 0.463
19.13 17.24 11.76
12 0.722 0.835 0.557
18.34 21.20 14.14
14 0.722 0.913 0.590
18.34 23.19 14.98
16 0.722 1.038 0.713
18.34 26.36 18.11
18 0.722 1.163 0.835
18.34 29.54 21.20
20 0 877 1.288 1.015
22 30 32.71 25.78
22 0.877 1.413 1.015
22.30 35.89 25.78
24 0.896 1.538 1.263
22.76 39.06 32.08
587
62G B - 587 - XX - XXS or P
Clamp for screened jacketed cable. 62 Series
only with grommet. Effective sealing is provided
over the range of cables covered by DEF
10(Pattern C) and DEF STAN 61-12 port (see
table). These are supplied to separate order only
for use with style T shells. Suffix XX-XXS or P enables grommet to be matched to the
insert arrangement.
Shell
Size length
Including
plug
A
Max length
Including
receptacle
B
max G
max
08 2.732 2.742 0.676 0.775
69.39 69.64 17.17 19.68
10 2.742 2.752 0.676 0.902
69.64 69.90 17.17 22.91
12 3.152 3162 0.812 1.030
80.06 80.31 20.62 2616
14 3.152 3.162 0.926 1.157
80.06 80.31 23.52 29.39
16 3.272 3 282 1.051 1.284
83.10 83.36 26.67 32.61
18 - - - -
- - - -
20 3.272 3.345 1.280 1.539
83.10 84.96 32.51 39.09
22 - - - -
- - - -
24 3.696 3.768 1.620 1.783
93.87 95.70 41.15 45.29
52
Cable Accessories
711
62G B
-
711
-
XX
-
XXS or P
Grommet and nut with right angled strain
relief clamp. The clamp prevents flexing of
the wires in the immediate vicinity of the
risers, so avoiding the risk of leaks (these
are supplied to separate order only for use
with style T shells).
Suffix XX - XXS or P
enables grommet to be
matched to the insert
arrangement.
Shell
Size A
max G
max H
± 0.005
± 0.13
Q
max
08 1.5/32 0.828 0.161 0.733
21.03 4.09 18.62
10 1.3/16 0.891 0.193 0.795
22.63 4.90 20.19
12 1.7/32 1.016 0.317 0.858
25.81 8.05 21.79
14 1.1/4 1.141 0.380 0.915
28.98 9.65 23.24
16 1.5/16 1.203 0.505 1.010
30.56 12.83 25.65
18 1.3/8 1.426 0.630 1.070
36.22 16.00 27.18
20 1.3/8 1.426 0 630 1.140
36.22 16.00 28.96
22 1.29/64 1.567 0.755 1.170
39.80 19.18 29.72
24 1.15/32 1.735 0.805 1.260
44.07 20.45 32.00
720
62G B
-
7
20
-
XX
Clamp for unscreened jacketed cable. No
grommet is supplied, for use with 50T, 51T
and 56T styles. Suffix XX specifies shell size.
Shell
Size A
max G
max Z
closed Z
free
08 1.085 0.561 0 168 0 230
27.56 14.25 4.28 5.84
10 1.060 0.686 0.205 0.312
26.92 17.43 5.21 7.93
12 1.160 0.81 1 0 338 0.442
29.46 20.60 8.59 1 1.23
14 1.360 0.936 0.416 0.539 1
34.54 23.78 10.57 13.69
16 1.585 1.061 0.550 0.616
40.26 26.95 13.97 15.65
18 1.785 1.186 0.600 0.672
45.34 30.13 15.24 17.57
20 1.981 1.311 0.635 0.747
50.32 33 30 16.13 18.98
22 2.181 1.436 0.670 0.846
55.39 36.75 17.02 21.49
24 2.216 1.561 0.740 0.894
56.28 39.65 18.80 22.71
53
Cable Accessories
776
62GB
-
776
General duty shell to accept conduit, AN
3057 or MS 3057 A cable clamps and heat
shrink sleeves.
Shell
Size A
max M
Thread
08 0.937 1/2 - 28 UNEF
23.80
10 0.937 5/8 - 24 NEF
23.80
12 0.937 3/4 - 20 UNEF
23.80
14 0.937 7/8 – 20 UNEF
23.80
16 0.937 1 - 20 UNEF
23.80
18 0.937 1.3/16 - 18 NEF
23.80
20 0.937 1.3/16 - 18 NEF
23.80
22 0.937 1.7/16 - 18 NEF
23.80
24 0.937 1.7/16 - 18 NEF
23.80
1225
62GB
-
1225
900 clamp for screened jacketed cable. These
are supplied to separate order only for use with
style T shells.
Shell
Size A
max B
max C
max D
max
08 0.942 0.821 1.160 0.636
23.93 20.85 29.46 16.15
10 0.883 0.821 1.160 0.636
22.43 20.85 29.46 16.15
12 0.704 0.821 1.160 0.636
17,88 20.85 29.46 16.15
14 1.119 0.937 1.160 0.636
28.42 23.80 29.46 16.15
54
Cable Accessories
5028
62G B
-
5028
-
XX
-
XXS or P
75% Clamp for screened jacketed cable with
grommet. Effective sealing is provided over the
range of cables covered by DEF 10 (Pattern C)
and DEF STAN 61 - 12 part 5 (see table).
These are supplied to separate order only and
are intended for use with style T shells.
Suffix XX-XXS or P
enables grommet to be
matched to the insert
arrangement.
Shell
Size length
including
receptacle
A
Max length
including
plug
B
max G
max max
08 2.416 2.375 0.676 0.775 1.750
61.37 60.24 17.17 19.68 44.45
10 2.573 2.532 0.676 0.902 1.875
65.35 64.39 17.17 22.91 47.63
12 2.666 2.625 0.812 1.030 2.125
67.72 66.68 20.62 26.16 53.98
14 2.760 2.719 0.926 1.157 2.125
70.10 69.04 23.52 29.39 53.98
16 2.790 2.750 1.051 1.284 2.062
70.87 69.80 26.70 32.61 52.38
18 - - - - -
- - - - -
20 3.312 3.250 1.280 1 539 2.062
84.13 82.55 32.51 39 09 52.38
22 - - - - -
- - - - -
24 3.500 3.375 1.620 1.783 2.187
88.90 85.73 41.15 45.29 55.55
55
Insert Orientations
Normal position
with pin contacts
Alternative position of insert
with socket contacts
(∅ counter clockwise)
Each diagram shows mating face of insert.
Alternate position of insert
with pin contacts
(∅ clockwise)
Orientation
∅
(degrees)
Insert
Arrangement Normal W X Y Z
8-2 0 58 122 - -
8-3 0 60 210 - -
8-33 0 90 - - -
8-4 0 45 - - -
8-98 0 - - - -
10-2 0 - - - -
10-6 0 90 - - -
10-7 0 - - - -
12-3 0 - - 180 -
12-10 0 60 155 270 295
14-5 0 40 92 184 273
14-12 0 43 90 - -
14-15 0 17 110 155 234
14-19 0 30 165 315 -
16-18 0 54 152 180 331
16-23 0 158 270 - -
16-26 0 60 - 275 338
18-11 0 62 119 241 340
18-32 0 85 138 222 265
20-16 0 238 318 333 347
20-41 0 45 126 225 -
22-21 0 16 135 175 349
22-55 0 30 142 226 314
24-61 0 90 180 270 324
56
Key/Keyway
Orientations
Datum is always taken from major key or keyway. In
receptacles the major keyway always remains fixed
in relation to the mounting flange. For the
A',B,C,D',E and F orientations, the three bayonet
locations and associated minor keyways are rotated
complete, in accordance with the table below.
N.B.
-
The accompanying diagram shows a receptacle
shell, with keyways. Corresponding key orientations
for a mating plug shell are therefore always
clockwise.
Shell
Size Values for ∝
(degrees) Values for θ
(degrees) Values for β
(degrees)
N A B C D E F N A B C D E F N A B C D E F
8 105 92 - - 118 118 82 35 35 - - 35 30 50 75 75' - - 75 100 75
10 105 95 85 125 115 115 85 35 35 35 35 35 30 50 75 75 75 75 75 100 75
12 105 97 89 121 113 115 85 35 35 35 35 35 30 50 75 75 75 75 75 100 75
14 105 98 91 119 112 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75
16 105 99 93 117 111 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75
18 105 100 95 115 110 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75
20 105 100 95 115 110 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75
22 105 101 97 113 109 7S 120 35 35 35 35 35 30 50 75 75 75 100 75 75 75
24 105 101 97 113 109 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75
Shell
Size
Values for ϕ (degrees)
Orientation Values for ω (degrees)
Orientation
N A B C D E F N A B C D E F
8 50 50 50 50
50
30 45 60 47 - - 73 73 47
10 50 50 50
50
50
30 45 60 50 40 80 70 70 50
12 50 50 50
50
50
30 45 60 52 44 76 68 70 50
14 50 50 50
50
50
30 35 60 53 46 74 67 30 75
16 50 50 50
50
50
30 35 60 54 48 72 66 30 75
18 50 50 50
50
50
30 35 60 55 50 70 65 30 75
20 50 50 50
50
50
30 35 60 55 50 70 65 30 75
22 50 50 50
50
50
30 35 60 56 52 68 64 30 75
24 50 50 50
50
50
30 35 60 56 52 68 64 30 75
57
Assembly
Instructions
for Amphenol straight S.J. clamps 62GB
-
587 for
internally and externally screened and unscreened
cables to DEF 10 and DEF STAN 61-12 Part 5.
Internally Screened Jacketed Cable
‘Type C’
Cable and Wire Stripping
Strip the outer P.V.C. Jacket of the cable back to dim `A'
to expose the internal braid. Trim the braid back to within
19.05mm (0.75 in) of P.V.C. jacket and fold back `B'.
A Dimension
Size mm in
08 34.93 1.375
10 36.51 1.437
12 8 14 41.27 1.625
16 & 20 44.45 1.75
24 49.21 1.937
Strip 5.3mm (0.210 in) to 6.1 mm (0.240 in) of insulation
from each wire to expose centre conductor. Tin the ends. If
ends fray twist them back to their original lay before
tinning.
Initial Assembly
Slide onto the cable the following items in this order (1)
Nut (2) Washer (3) Gasket (4) Braid Clamp and (5)
Clamp Body (6) Grommet.
Solder Connection to Contacts
Insert the individual wires into the appropriate grommet
holes. At the same time, slide the grommet back as far as
possible until the tinned ends of the centre conductors are
far enough out of the grommet to permit soldering to the
contacts. Insert the tinned ends of wires into the
appropriate contacts in 62 series connector and solder into
place. Slide the grommet forward over the wired contacts
and press firmly into rear of connector shell and against
rear face of insert.
58
Assembly
Instructions
Externally Screened J
acketed Cable Types
‘B’ & `Q’
Cable and Wire Stripping
Strip the outer braid and internal P.V.C. jacket of the
cable back to dim ‘A’
A Dimension
Size mm in
08 33.32 1.312
10 34.93 1.375
12 & 14 39.7 1.563
16 & 20 42.85 1.687
24 47.63 1.875
Strip
5.3mm (0.210 in) to 6.1 mm (0.240 in) of insulation
from each wire to expose centre conductor. Tin the ends. If
ends fray twist them back to their original lay before
tinning.
Initial Assembly
Slide onto the cable the following items in this order
(1) Nut (2) Washer (3) Male Braid Clamp Convolute
Screen (See B) as far as possible, and slide on items
(4) Female Braid Clamp (5) Gasket and (6) Clamp
Body (7) Grommet
Solder Connection to Contacts
Insert the individual wires into the appropriate grommet
holes. At the same time, slide the grommet back as far as
possible, until the tinned ends of the centre conductors
are far enough out of the grommet to permit soldering to
the contacts. Insert the tinned ends of wires into the
appropriate contacts in 62 series connector and solder
into place. Slide the grommet forward over the wired
contacts and press firmly into the rear of connector shell
and against rear face of insert.
Unscreened Jacketed Cables Type `A'
All procedures concerning this type of cable to be as for
internally screened jacketed cable, but all references to
screen (Braid) to be disregarded.
59
Assembly
Instructions
for Amphenol angled S.J. clamps 62GB
-
5028 for
internally and externally screened and unscreened
cables to DEF 10 and DEF STAN 61-12 Part 5.
Internally Screened Jacketed Cable Type
`C’
Cable and Wire Stripping
Strip the outer P.V.C. jacket of the cable back to dim `A'
to expose the internal braid. Trim the braid back to within
19.05mm (0.75 in) of P.V.C. jacket and fold back `B'.
A Dimension
Size
mm in
08 58.15 2.89
10,12,14 66.68 2.625
16 69.85 2.75
20 88.9 3.50
24 95.25 3.75
Strip 5.3mm (0.210 in) to 6.1 mm (0.240 in) of insulation
from each wire to expose centre conductor. Tin the ends. If
ends fray, twist them back to their original lay before
tinning.
Initial Assembly
Slide onto the cable the following items in this order (1)
Nut (2) Washer (3) Gasket (4) Braid Clamp (5) 75o
Angled Body (6) Grommet.
Solder Connection to Contacts
Insert the individual wires into the appropriate grommet
holes. At the same time, slide the grommet back as far as
possible, until the tinned ends of the centre conductors
are far enough out of the grommet to permit soldering to
the contacts. Insert the tinned ends of wires into the
appropriate contacts in 62 series connector and solder into
place. Slide the grommet forward over the wired contacts
and press firmly into the rear of the connector shell and
against rear face of insert.
60
Assembly
Instructions
Solder Connection to Conta
cts
Insert the individual wires into the appropriate grommet
holes. At the same time, slide the grommet back as far as
possible, until the tinned ends of the centre conductors are
far enough out of the grommet to permit soldering to the
contacts. Insert the tinned ends of wires into the
appropriate contacts in 62 series connector and solder into
place. Slide the grommet forward over the wired contacts
and press firmly into the rear of connector shell and against
rear face of insert.
A Dimension
Size
mm in
08 58.15 2.89
10,12,14 66.68 2.625
16 69.85 2.75
20 88.9 3.50
24 95.25 3.75
Externally Screened Jacketed Cables
Type `B' & `Q'
Cable and Wire Stripping
Strip the outer braid and internal P.V.C. jacket of the
cable back to dim `A'.
Strip 5.
3mm (0.210 in) to 6.1 mm (0.240 in) of insulation
from each wire to expose centre conductor Tin the ends. If
ends fray, twist them back to their original lay before
tinning.
Initial Assembly
Slide onto the cable the following items in this order:(1)
Nut (2) Washer (3) Male Braid Clamp - Convolute Screen
(See B) as far as possible and slide on items:(4) Female
Braid Clamp (5) Gasket (6) 75o Right Angled Body (7)
Grommet.
Unscreened Jacketed Cables Type `A'
All procedures concerning this type of cable to be as for
internally screened jacketed cable, but all references to
screen (Braid) to be disregarded.
61
Assembly
Instructions
Wire Stripping
Strip 5.3mm (0.210 in) to 6.1 mm (.240 in) of insulation
from end of wires to expose centre conductor and tin
the ends. If ends fray, twist them back to their original
lay before tinning.
Wire Accommodation
Wire Seal and Conductor
Contact
Size
Colour
Code
Wire Insulation
min. dia. max. dia.
Conductor
max. dia.
ins (mm) ins (mm) ins (mm)
20
16
Red
Blue
0.047 (1.19)
0.066 (1.68)
0.085 (2.16)
0.109 (2.77)
0.042 (1.07)
0.062 (1.57)
Recommended Tightening Torques
Single Hole Shell Size 8 10 12 14 16 18 20 22 24
Fixing Nm 3.73 4.07 6.78 7.34 8.25 9.26 11.98 13.90 15.03
Receptacles lbf. ins. 33 36 60 65 73 82 106 123 133
Accessories
Nm 3.39-3.96 3.96-4.52 4.52-5.09 5.09-5.65 5.65-6.78 6.78-7.91 8.48-9.04 9.61-10.17
10.74-11.3
lbf. ins. 30-35 35-40 40-45 45-50 55-60 65-70 75-80 85-90 95-100
62
Notice: Products are sold subject to Amphenol’s Standard Conditions of Sale. All specifications and statements contained herein are believed to
be correct at the time of printing but no representation or warranty, express or implied, is given as to any specification or statement contained
herein. Product specifications including performance characteristics are typical only and subject to deviation. Specifications are also subject to
change without notice. Users should not assume that all safety measures are indicated or that other measures may not be required. No
representation or warranty, express or implied, is given that any use of products (including any stated or suggested use) does not infringe any
patent, registered design or other third party rights and no stated or suggested use of products can be taken to recommend any such infringement.
Amphenol
Thanet Way,
Whitstable,
Kent, CT5 3JF
Tel: 01227 773200
Fax: 01227 276571
info@amphenol.co.uk
www.amphenol.co.uk
