7.0 mm x 5.0 mm VCXO V85H series
www.bliley.com 2545 West Grandview Blvd Erie, PA. 16506 Tel (814) 838-3571
Page 1 of 4 Rev 1.4
Description:
The V85H Crystal Oscillator
(VCXO) Series products provide a
wide range of options in
temperature stability, pullability,
and very high operating frequency
range in a 7.0 x 5.0 mm ceramic
package.
Features:
•
Available in frequencies from
1.5MHz to 700 MHz.
• Tri-state Enable/Disable
• Hermetically sealed ceramic
SMD package
• PECL / LVDS
•
RoHS-6/Leadfree compliant
Frequency Range Operating Temperature Frequency Stability
Frequency
Operating Temperature Product Code
Freq. Stability Product Code
1.5 to 700 MHz
-10 to +60C
A
+/- 25 ppm
A
0 to +70C
B
+/- 50 ppm
B
-20 to 70C
C
-40 to 85C
D
Frequency stability includes 25C tolerance, drift over temperature, change versus voltage and load, 20 year aging, shock
and vibration
Aging:
(typical at 622.08MHz after 30 days continuous operation)
Frequency Timeframe
Aging Product Code
622.08 MHz
1st Year +/- 5.0ppm N/A
Supply Voltage (Vs):
Power Supply (Vs) 3.3 Vdc +/-10%
Product Code N/A
Supply Voltage Sensitivity ( +/- 10% ) : +/- 2 ppm max. frequency change
Frequency Pulling Range:
3.3 volt
0 to 3.3v
on Pin 1
Product Code
+/-100 ppm min N/A
Current Consumption ( I
DD
):
I
DD
( at 3.3V )
PECL / LVDS
Frequency Range ( MHz ) mA
1.5 to 700.000 100 / 80
7.0 mm x 5.0 mm VCXO V85H series
www.bliley.com 2545 West Grandview Blvd Erie, PA. 16506 Tel (814) 838-3571
Page 2 of 4 Rev 1.4
Environmental:
Storage Temperature -55 to +125 °C
Output Waveform:
PECL LVDS
Product Code A B
At 3.3 V At 3.3 V
Output Logic 1 2.275Vmin 1.6Vmax
Output Logic 0 1.680Vmax
0.9Vmin
Rise/Fall Time ( nS )
1 max 1 max
Start-up Time: 3 mS max.
Tri-state function Pin 2:
Pin 2 = Ouput Active with 2.5 V or greater
Ordering Options:
Product Family Operating
Temperature
Temperature
Stability
Output Type Operating
Frequency
V85H A A A XXX.XXXMHz
V85H B B B XXX.XXXMHz
V85H C XXX.XXXMHz
V85H D XXX.XXXMHz
V85H C A A 325MHz
Part Number Build Example
**Consult Bliley sales if other options required
RoHs compliant ; -20 to 70C ; +/- 25 ppm; PECL outputs and 325 MHz nominal operating frequency.
How to Order This Product:
Contact Bliley Technologies with Product Selection Code from Ordering Options Section above.
