A-100 APEM www.apem.com
600H and 600NH series
Toggle switches - high amperage
Distinctive features and specifications
A
❑❑ Construction
Terminal and contact support are manufactured from a single piece of metal. The
contacts are resistance-welded to the terminal for increased mechanical strength.
❑❑ Rating
These switches are suitable for motor loads and power applications up to
15A 250VAC or 10A 400VAC
❑❑ Metal or insulated lever
❑❑ UL, CSA and NF-VDE (EN 61058-1) approved
ELECTRICAL SPECIFICATIONS
• Max. current/voltage ratings : see tables below
• Peak current : 30A max. during 1/2 sine, 250VAC
• Initial contact resistance : 10 mΩmax. at 1A 2VDC
• Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength :
2.000 Vrms 50 Hz min. between terminals
2.500 Vrms 50 Hz min. between terminals and frame
• Electrical life : 10.000 cycles at full load
- FOR INFORMATION-
Max. current/voltage rating w. resistive load
ON - OFF
ON - ON
15A 250VAC
10A 24VDC
15A 12VDC
10.000 cycles
Other
15A 125VAC
12A 250VAC
5A 25VDC
10.000 cycles
ON OFF ON
15A 250VAC 6.000 cycles
Functions Ratings Electrical life
MODELS
Single and
double pole
Three pole
FUNCTIONS
ON - OFF (1)
ON - ON (6)
Other
(4-5-7-8-9)
ON - OFF (1)
& ON - ON (6)
Other
(4-5-7-8-9)
10A 1/2 HP
125-250VAC
15A 1/2 HP
125-250VAC
10A 1/2 HP
125-250VAC
600H - 600NH
NF-VDEUL
UL 1054
CSA
CSA 22-2 EN 61058-1
15A 1/2 HP
125-250VAC 10(4)A
400VAC
T 85/55 (600H)
T 125/55
(600NH)
APPROVED RATINGS
MATERIALS
• Case : polyester UL94-V0
• Actuator :
- 600H : brass, nickel plated
- 600NH : black polyamide
• Bushing : brass, nickel plated
• Contacts : silver/nickel alloy
GENERAL SPECIFICATIONS
• Torque : 1,50 Nm (1.10 Ft.lb) max. applied to nut
• Panel thickness : 4,5 mm (.177) max. between 2 nuts
• Operating temperature : -20°C to +55°C
APEM www.apem.com A-101
600H and 600NH series
Toggle switches - high amperage
Specifications
A
AGENCY APPROVALS
Availability : see chart on previous page.
Marking : approved models are standard marked.
PANEL CUT-OUT
MOUNTING RECOMMENDATIONS
Connection
• For quick-connect terminals, use 6,3 x 0,8 mm
normalized female connectors.
• For screw terminals, use :
either 1,5 mm2or 2,5 mm2rigid wires,
or prepared stripped and tin plated flexible wires,
or prepared flexible wires with crimped termination per
EN 50027 (DIN 46228)
Ground connector
Compulsory if the panel is not metallic or not connected
to ground. Should also be used when front face nut is of
plastic material.
Order separately, see section I.
(.20)
(.066)
(.48DIA)
1.70
Ø12.20
5.10
(.377)
Ø12.50
(.492DIA)
(.137DIA)
Ø3.50
9.60
Ø12.20
(.48DIA)
EN 61058-1 EN 61058-1
A-102 APEM www.apem.com
A
600H and 600NH series
Toggle switches - high amperage
Overview
6
SERIES
Number of poles
3Single pole
4Double pole
5Three pole
For 4 pole, see 600
series.
Electrical functions
1ON - OFF
5MOM - ON
6ON - ON
7MOM OFF MOM
8ON OFF MOM
9ON OFF ON
4ON ON ON
ON ON MOM Δ
MOM ON MOM Δ
ΔMust not have blank in
"momentary" box.
Momentary
1R ON ON MOM
2R MOM ON MOM
Actuator and terminals
HMetal lever, screw terminals
H/2 Metal lever, solder lug/quick-connect
terminals
NH Insulated lever, screw terminals
NH/2 Insulated lever, solder lug/quick-
connect terminals
NH/3 Insulated lever, normalized quick-
connect terminals
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
Locking levers
1V 1 locked position
2V 2 locked positions
3V 3 locked positions
Options
For models with metal lever only
TTropicalized case
KFront panel sealing
LBushing 16 mm (.629)
LUXE Chrome finish
TKLUXE Front panel sealing + T and LUXE
GMatt black finish
GK Matt black finish + front panel sealing
G038 Luminous tip on lever
Security caps are available to prevent inadvertent lever operation. They are presented in section I.
Sealing boots are available on 600H series to protect the switches against dust and water. They are presented in section H.
Mounting accessories : standard hardware supplied with all models :
- 600H and series : 1 hex nut U166 and 1 knurled nut U411
- 600NH series : 1 hex nut U166 and 1 knurled nut U522
Standard and special hardware are presented in section I.
Packaging unit : 25 pieces.
ABOUT THIS SERIES
APEM www.apem.com A-103
600H series
Toggle switches - high amperage - metal lever
Solder lug/quick-connect terminals - screw terminals
A
Three pole
Double pole
Single pole
MODEL
STRUCTURE
III II I
2-1 2-3
Solder lug Screw term.
631H/2 631H ON - OFF
635H/2 635H MOM - ON
636H/2 636H ON - ON
637H/2 637H MOM OFF MOM
638H/2 638H ON OFF MOM
639H/2 639H ON OFF ON
III II I
2-1 2-3
5-4 5-6
8-7 8-9
Solder lug Screw term.
651H/2 651H ON - OFF
655H/2 655H MOM - ON
656H/2 656H ON - ON
657H/2 657H MOM OFF MOM
658H/2 658H ON OFF MOM
659H/2 659H ON OFF ON
III II I
2-1 2-3
5-4 5-6
Solder lug Screw term.
641H/2 641H ON - OFF
644H/2 644H* ON ON ON
644H/2-1R 644H-1R* ON ON MOM
644H/2-2R 644H-2R* MOM ON MOM
645H/2 645H MOM - ON
646H/2 646H ON - ON
647H/2 647H MOM OFF MOM
648H/2 648H ON OFF MOM
649H/2 649H ON OFF ON
• 2 and 3 maintained or momentary positions
• Solder lug/quick-connect terminals 6,35 x 0,8 (.250 x.031)
or screw terminals + clamp
• 1, 2 and 3 pole configurations
• Normalized quick-connect terminals
(/3) optional. On request.
* Function 4 : SP in DP case - see end of catalogue.
➞Keyway
➞Keyway
➞Keyway
➞Keyway
3 12
(.122DIA)
Ø3.10
4.50
(.177)
(.25x.031)
6.35x0.80
(.031)
(.118DIAx0.50 IS)
Ø3.00x0.50 SI
0.80
6.35
(.25)
III
II
I
0.80
(.031)
36˚
29.50
7.10 14.90
14.00 17.50 10.50 15.00 11.00
Ø12.00x0.75 SI
(.472DIAx0.75 IS)
(.279) (.586)
(.433)(.59)(.413)(.689)
(1.161)
(.551)
3
2
1
A3
A2
A1
(.689) (.413) (.846) (.433)
(.433)
(1.169)
(.846)
30˚
(.578)(.267)
21.50 11.0021.4010.5017.50
11.00
14.656.80
29.70
(.472DIAx0.75 IS)
Ø12.00x0.75 SI
0.80
(.031)
III
II
I
B4
B5
B6
(.472DIAx0.75 IS)
147
(.586)(.279)
(.433)(.949)(.44)(.689)
(1.358)
34.50 17.50 11.20 24.00 11.00
14.90
7.10
Ø12.00x0.75 SI
(1.252)
(.472) (.472)
12.00 12.00
31.80
26˚
(.031)
0.80
I
II
III
258
369
600H/2 600H
A-104 APEM www.apem.com
600H series
Toggle switches - high amperage - metal lever
A
(1.181)
30.00
40.00
(1.574)
(.236DIA)
Ø6.00
Ø6.00
(.236DIA)
(.248DIA)
Ø6.30
(.590)
15.00
(.413)
10.50
26.30
(1.035)
2.80
(.110)
TTropicalized diallylphthalate case (-40°C to +85°C)
KFront panel sealing by 1 O-ring and sealing washer.
Protects the switch against water and dust. Panel seal withstands 1 bar
pressure and remains sealed even when switch is operated
LSpecial threaded bushing, length 16 mm (.629)
LUXE Chrome plated lever and cap nut U117
TK LUXE Options T, K and LUXE.
GMatt black finish on bushing, lever and nuts.
Includes tropicalization (option T)
GK Front panel sealing by O-ring and sealing washer (as described in option
TK LUXE)
+ option G
G038 Option G + fluorescent tip on lever.
White fluorescent tip becomes luminous when submitted to ultra violet rays.
-4 30 mm (1.181) long actuator
-5 40 mm ( 1.574) long actuator
-6 Retro style actuator
(gold plated or chrome plated : on request)
• Ergonomic flat plastic actuator : add U282 at the end of
switch model number.
Complete above box with desired options in the same order as below
OPTIONS FOR 600H SERIES ONLY
➀ O-ring ➁ Sealing washer
K
0.38
1
2
LOCKING LEVERS (1 and 2 pole models) For 3-pole models, refer to 6000 series.
ACTUATOR OPTIONS (1 and 2 pole models)
-2V-1V -3V
U282
1 locked position 2 locked positions 3 locked positions
➞Keyway
(.763)(.468)
11.90 19.40
(15/32''32NS)
Ø11.90-32NS
(.811)(.468)
11.90 20.40
(15/32''32NS)
Ø11.90-32NS
-4 -5 -6
APEM www.apem.com A-105
6-600H series
Toggle switches - metal lever
A
MATERIALS
• Case : melamine/polyester
• Actuator : brass, nickel plated
• Bushing : brass, nickel plated
• Contacts : copper, silver plated
SPECIFICATIONS
• Max. current/voltage rating with resistive load
: 6A 250VAC and 125VAC
• Initial contact resistance : 10mΩmax. at 1A 2VDC
• Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength : 2.500 Vrms 50 Hz min. between terminals
2.500 Vrms 50 Hz between terminals and frame
• Electrical life at full load : 10.000 cycles
• Torque : 1,50 Nm (1.10 Ft.lb) max. applied to nut
• Panel thickness : 4,5 mm (.177) max. between 2 nuts
• Operating temperature : -20°C to +55°C
• Hardware supplied : 1 hex nut U166 and 1 knurled nut U411
Three pole
Double pole
Single pole
III II I
2-1 2-3
Solder lug Screw term.
6-631H/2 6-631H ON - OFF
6-636H/2 6-636H ON - ON
6-639H/2 6-639H ON OFF ON
III II I
2-1 2-3
5-4 5-6
8-7 8-9
Solder lug Screw term.
6-651H/2 6-651H ON - OFF
6-656H/2 6-656H ON - ON
6-659H/2 6-659H ON OFF ON
III II I
2-1 2-3
5-4 5-6
Solder lug Screw term.
6-641H/2 6-641H ON - OFF
6-646H/2 6-646H ON - ON
6-649H/2 6-649H ON OFF ON
➞Keyway
➞Keyway
➞Keyway
III
II
I
0.80
(.031)
36˚
29.50
7.10 14.90
14.00 17.50 10.50 15.00 11.00
Ø12.00x0.75 SI
(.472DIAx0.75 IS)
(.279) (.586)
(.433)(.59)(.413)(.689)
(1.161)
(.551)
3
2
1
A3
A2
A1
(.689) (.413) (.846) (.433)
(.433)
(1.169)
(.846)
30˚
(.578)(.267)
21.50 11.0021.4010.5017.50
11.00
14.656.80
29.70
(.472DIAx0.75 IS)
Ø12.00x0.75 SI
0.80
(.031)
III
II
I
B4
B5
B6
(.472DIAx0.75 IS)
147
(.586)(.279)
(.433)(.949)(.44)(.689)
(1.358)
34.50 17.50 11.20 24.00 11.00
14.90
7.10
Ø12.00x0.75 SI
(1.252)
(.472) (.472)
12.00 12.00
31.80
26˚
(.031)
0.80
I
II
III
258
369
(.122DIA)
Ø3.10
4.50
(.177)
(.25x.031)
6.35x0.80
(.031)
(.118DIAx0.50 IS)
Ø3.00x0.50 SI
0.80
6.35
(.25)
6-600H/2 6-600H
A-106 APEM www.apem.com
600NH series
Toggle switches - high amperage - insulated lever
Solder lug/quick-connect terminals - screw terminals
A
Three pole
Double pole
Single pole
• 2 and 3 maintained or momentary positions
• Solder lug/quick-connect terminals 6,35 x 0,8 (.250 x.031) or screw
terminals + clamp
• 1, 2 and 3 pole configurations
• Normalized quick-connect terminals
(/3) optional. On request.
III II I
2-1 2-3
Solder lug Screw term.
631NH/2 631NH ON - OFF
635NH/2 635NH MOM - ON
636NH/2 636NH ON - ON
637NH/2 637NH MOM OFF MOM
638NH/2 638NH ON OFF MOM
639NH/2 639NH ON OFF ON
III II I
2-1 2-3
5-4 5-6
8-7 8-9
Solder lug Screw term.
651NH/2 651NH ON - OFF
655NH/2 655NH MOM - ON
656NH/2 656NH ON - ON
657NH/2 657NH MOM OFF MOM
658NH/2 658NH ON OFF MOM
659NH/2 659NH ON OFF ON
III II I
2-1 2-3
5-4 5-6
Solder lug Screw term.
641NH/2 641NH ON - OFF
644NH/2 644NH ON ON ON
644NH/2-1R 644NH-1R* ON ON MOM
644NH/2-2R 644NH-2R* MOM ON MOM
645NH/2 645NH MOM - ON
646NH/2 646NH ON - ON
647NH/2 647NH MOM OFF MOM
648NH/2 648NH ON OFF MOM
649NH/2 649NH ON OFF ON
* Function 4 : SP in DP case - see end of catalogue.
➞Keyway
➞Keyway
➞Keyway
➞Keyway
3 12
(.122DIA)
Ø3.10
4.50
(.177)
(.25x.031)
6.35x0.80
(.031)
(.118DIAx0.50 IS)
Ø3.00x0.50 SI
0.80
6.35
(.25)
1
2
3
(.551) (.531) (.453) (.59) (.433)
(.59)(.279)
(1.161)
(.472DIAx0.75 IS)
Ø12.00x0.75 SI
13.50 11.50 15.00 11.0014.00
15.007.10
29.50
36˚
0.80x6.35
(.031x.25)
I
II
III
A1
A2
A3
(.846) (.531) (.452) (.846) (.433)
(.579)(.267)
(.472DIAx0.75 IS)
Ø12.00x0.75 SI
(1.169)
21.50 13.50 11.50 21.50 11.00
29.70
14.706.80
30˚
11.00
(.433)
(.031x.25)
0.80x6.35
II
III
I
B4
B5
B6
(.531)
13.50
(.472DIAx0.75 IS)
147
(.586)(.279)
(.433)
(.949)(.44)
(1.358)
34.50 11.20 24.00 11.00
14.90
7.10
Ø12.00x0.75 SI
(1.252)
(.472) (.472)
12.00 12.00
31.80
26˚
(.031x0.25)
0.80x6.35
III
II
258
369
I
600NH/2 600NH
APEM www.apem.com A-107
6-600NH series
Toggle switches - insulated lever
A
MATERIALS
• Case : melamine/polyester
• Actuator : black polyamide
• Bushing : brass, nickel plated
• Contacts : copper, silver plated
SPECIFICATIONS
• Max. current/voltage rating with resistive load
: 6A 250VAC and 125VAC
• Initial contact resistance : 10mΩmax. at 1A 2VDC
• Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength : 2.500 Vrms 50 Hz min. between terminals
2.500 Vrms 50 Hz between terminals and frame
• Electrical life at full load : 10.000 cycles
• Torque : 1,50 Nm (1.10 Ft.lb) max. applied to nut
• Panel thickness : 4,5 mm (.177) max. between 2 nuts
• Operating temperature : -20°C to +55°C
• Hardware supplied : 1 hex nut U166 and 1 knurled nut U522
(.122DIA)
Ø3.10
4.50
(.177)
(.25x.031)
6.35x0.80
(.031)
(.118DIAx0.50 IS)
Ø3.00x0.50 SI
0.80
6.35
(.25)
Three pole
Double pole
Single pole
III II I
2-1 2-3
Solder lug Screw term.
6-631NH/2 6-631NH ON - OFF
6-636NH/2 6-636NH ON - ON
6-639NH/2 6-639NH ON OFF ON
III II I
2-1 2-3
5-4 5-6
8-7 8-9
Solder lug Screw term.
6-651NH/2 6-651NH ON - OFF
6-656NH/2 6-656NH ON - ON
6-659NH/2 6-659NH ON OFF ON
III II I
2-1 2-3
5-4 5-6
Solder lug Screw term.
6-641NH/2 6-641NH ON - OFF
6-646NH/2 6-646NH ON - ON
6-649NH/2 6-649NH ON OFF ON
➞Keyway
➞Keyway
➞Keyway
1
2
3
(.551) (.531) (.453) (.59) (.433)
(.59)(.279)
(1.161)
(.472DIAx0.75 IS)
Ø12.00x0.75 SI
13.50 11.50 15.00 11.0014.00
15.007.10
29.50
36˚
0.80x6.35
(.031x.25)
I
II
III
A1
A2
A3
(.846) (.531) (.452) (.846) (.433)
(.579)(.267)
(.472DIAx0.75 IS)
Ø12.00x0.75 SI
(1.169)
21.50 13.50 11.50 21.50 11.00
29.70
14.706.80
30˚
11.00
(.433)
(.031x.25)
0.80x6.35
II
III
I
B4
B5
B6
(.531)
13.50
(.472DIAx0.75 IS)
147
(.586)(.279)
(.433)
(.949)(.44)
(1.358)
34.50 11.20 24.00 11.00
14.90
7.10
Ø12.00x0.75 SI
(1.252)
(.472) (.472)
12.00 12.00
31.80
26˚
(.031x0.25)
0.80x6.35
III
II
258
369
I
6-600NH/2 6-600NH