10 9 8 7 6 5 4 3 2 4 | As? >] | (B) | A (PITCH) _ N 2 = - - - + - - - - Oo Q 0.14 +0.05 PIN WIDTH (B) | (0.95) ogA= O.27+01 | 154202) 0.27 20.1 175 | 15.6 | 18.26 | 502430-8010 80 14.3 12.4 15.06 502430-6410 64 13.5 1.6 14.26 502430-6010 60 Gin ae : am 11.5 9.6 12.26 502430-5010 50 4 10.3 8.4 1.06 502430-4410 44 ~ 9.5 7.6 10.26 502430-4010 40 0.15 20: y area go 3 8.3 6.4 9.06 502430-3410 34 FITTING NAIL | PIN FITTING NAIL N 2 7.9 6.0 8.66 502430-3210 32 WIDTH oO oO | C 20.2 | S 7.5 5.6 8.26 502430-3010 30 8.7 4.8 7.46 502430-2610 26 6.3 44 7.06 502430-2410 24 5.9 4.0 6.66 502430-2210 22 5.5 3.6 6.26 502430-2010 20 4.3 2.4 5.06 502430-1410 4 C B a [EMBOSSED PACKAGE] ik 4-#-% ORDER No, [CIRCUITS | CONNECTOR SERIES No. 502430-xx19 2s = GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE =rr (UNLESS SPECIFIED) MM ONLY 10:1 METRIC | Cl PROJECTION S Ss S DRAWN BY DATE TITLE o ~SS1Z) TQLNDER 4-2 RTAKEUCHI 2007/10/03 0.4 B-TO-B CONN. HGT=1.0 a ETA OVER ONDERT = CHECKED BY DATE W=2.6 PLUG ASSY tS =< _|5|10 SSO UNDERT + --- MSASAO 2007/10/03 S WW APPROVED BY DATE OR SEA) 3088 + ficasag 2007/10/03] 08% MOLEX INCORPORATED a S Sse LAR i-- MATERIAL NO. DOCUMENT NO. SHEET NO. moet DRAFT WHERE APPLICABLE SEE TABLE SD-502430-001 1 0F 2 Pe OS = MUST REMAIN SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H ip WITHIN DIMENSIONS [A SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION cease | ef es fe TF Ten-ce oan10 9 8 7 6 5 4 3 2 4 if NOTES 1. RAH MATERIAL 92-2 RERYT-( LCP) AFAR ULO4V-0 (8) WAFER:LIQUID CRYSTAL POLYMER(GLASS FILLED) UL94V-0 (COLOR:BLACK) ey + 0 AWS (t=0.08) PIN : PHOSPHOR BRONZE (t=0.08) #2: 0AMSA (t=0.15) FITTING NAIL : PHOSPHOR BRONZE (t=0.15) 2. Xv Xt PLATING | ey PIN 3 @xXxk O01 74 70X- pak GOLD O.AMICROMETER MINIMUM Fihxye rs TW Xyk 1074 70xX-ba LE UNDER PLATING : NICKEL 1.0MICROMETER MINIMUM Maye REF VBiay Tr y XL oa THHENTOBZSA V ATH. DIVIDE INTO PARTS THE GOLD PLATING OF THE CONTACT AND THE TAIL PART BY THE NICKEL PLATING. MATED DRAWING (REFERENCE) NTU, #8 FITTING NAIL VI VsBr y FLASH Au PLATING Titky Xe say Fi xXyX 1.0 74 70X-b VE A UNDER PLATING : NICKEL 1.0MICROMETER MINIMUM ( HBR 2) =(ARO8S (OE. 0.95 +0.03 B #0.03 \ APPLY FOR (CIRCUIT/2)-EVEN. 9 4. RAF: 502426 vY-X 1, 0.4 #0.03 1.0.22 +0.03 < 3 lo MATE WITH : 502426 SERIES, 8 , Oo 8 5. T-wHHR. 0.08 LIF g Z Gl w F-WVRUSROWARI. 0.1 LIT x 1 = o TAIL COPLANARITY TO BE 0.08MAXIMUM. SG | S TAIL AND FITTING NAIL COPLANARITY TO BE 0.1MAXIMUM. + i oS 6.ELV Be RoHS #42 ELV AND RoHS COMPLIANT. L ANSE PARC ARLE RT - REL. SRBC RRER ET OBO Sb EM. COM DCEHURE CL. + NO PATTERN CIRCUIT AND NO SOLDER ALLOWED IN THE SHADED AREA. HOWEVER, IF NEEDED TO ADD A TRACE OF THE SAME CIRCUIT, PUT THE SOLDER-RESIST, lo YET NO SOLDER ALLOWED IN THE AREA. q oO oO P.C.BOARD PATTERN LAYOUT (REFERENCE) S Ss = GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD NGLE =rr (UNLESS SPECIFIED) MM ONLY 10:1 METRIC | CU eRoect ECTION sss DRAWN BY DATE TITLE 3 2&8 \z FaUNDER ae RTAKEUCH! 2007/10/03 0.4 B-TO-B CONN. HGT=1.0 a ETA OVER OND CHECKED BY DATE W=2.6 PLUG ASSY 3S _||10 SSO UNDERT + --- MSASAO 2007/10/03 opasia OVER ___ APPROVED BY DATE ag8=2)4/30 + Cnn 007/10/03 f0'8* +MOLEX INCORPORATED ArwA QY a S Sse LAR +--- MATERIAL NO. DOCUMENT NO. SHEET NO. moet DRAFT WHERE APPLICABLE | SEE SHEET 1 SD-502430-001 2 OF 2 Pe OS = MUST REMAIN SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H ig WITHIN DIMENSIONS (A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_J_AM_S 9 B 7 6 | 5 | 4 | 3 | 2 Rev. E 2006/04/15 EN-02DA(021)40 9 8 7 6 5 | 4 | 3 | 2 iE5c_ NOTES 1. HERAT so7O TERRE ESBT SU. FOR DETAIL OF CONNECTOR DIMENSIONS, PLEASE SEE THE DRAWING OF CONNECTOR ITSELF (NOT PACKAGED). 2. MORE : 3000 A/') wv NUMBER OF CONNECTORS : 3000PCS/REEL 3. Y-R F7-7HS LEAD TAPE LENGTH _ ZOPCS. MIN. hy ST 7B ( Pry kz ) REEL TOP TAPE BONDED PART. (EMPTY) alah Lita | PULL. OUT Villa DIRECTION | (oe) SSW ULAR Mande AB TAIL PART we SS COMPONENT (EMPTY) PULL OUT 4OOMIN SUPPLIER 40MIN DIRECTION fat : ml el _ nN oF 6 "isl 8 4. 8 MATERIAL ~T os % 4) 7FT (CARRIER TAPE) : AY AFL Y (POLYSTYRENE) hy FF-T7 (TOP TAPE): PET . OTHER I) IV (REEL) s#RU RF LY IPS) <U 44 FUMES OD POLYSTYRENE (PS) <RECYCLE MATERIAL CONTAINED> 5. ELVARYROHS HOH ELV AND RoHS COMPLIANT Be (B10) Got (120) DETAIL "D" DIMENSION STYLE SCALE rag MODEL NO. | 2024 30-10 Sse GENERAL TOLERANCES THIRD. ANGLE =rr (UNLESS SPECIFIED) MM ONLY TT METRIC | Cl PROJECTION sss DRAWN BY DATE TITLE o S&F z SUNDER 4-2 RTAKEUCH! 2007/10/03 0.4 B-TO-B CONN. HGT=1.0 R ETA OVER OND CHECKED BY DATE PLUG ASSY EMBSTP PKG tS =< _|5|10 SSO UNDERT + --- MSASAO 2007/10/03 SS =S|4 OVER ___ [APPROVED BY DATE as se2) 30 t SASAO 2007/10/03 iKaldx MOLEX INCORPORATED " S Sse LAR t--- MATERIAL NO. DOCUMENT NO. SHEET NO. no 2=t DRAFT WHERE APPLICABLE SEE TABLE _|SD-502430-002 1 OF 4 PE = _ MUST REMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H ip WITHIN DIMENSIONS A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION Rev 0 2004/04/03 9 8 7 6 | 5 | 4 | 3 | 2 EN-02JA(021)10 9 8 7 6 5 4 3 2 4 aEK LAR (1.66) PULL OUT DIRECTION (0.83). |, (2.5) hy TF-7 - (2.5) TOP TAPE S02430-se Gv (1.66) ~ oO So | H < 3 - z__ <f Ss al a S N } SECTION X-X Tae ae eS | Q.3 20.05 nS (2) y~=| X x (1.36) ~7915'9" |_g.01 420. RULE $4030.27 ACCUMULATIVE PITCH 40+0.2 SECTION Y-Y_ 6mm + 7TA7 16mm WIDTH CARRIER TAPE 7.58 502430-2610 26 7.18 502430-2410 24 16 21,4 17.4 6.78 502430-2210 22 6.38 502430-2010 20 5.18 502430-1410 14 Re VT T-THE C B (A) MATERIAL No. CKT. CARRIER TAPE WIDTH MODEL _No. | 502430-xx10 2s = GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE =rr (UNLESS SPECIFIED) MM ONLY TT METRIC | Cl PROJECTION Sss DRAWN BY DATE TITLE o S&F z SUNDER 4-2 RTAKEUCH! 2007/10/03 0.4 B-TO-B CONN. HGT=1.0 R ETA OVER OND CHECKED BY DATE PLUG ASSY EMBSTP PKG tS =< _|5|10 SSO UNDERT + --- MSASAO 2007/10/03 > Ww APPROVED BY DATE OR SEA 3088 + ficasag 2007/10/03] 08% MOLEX INCORPORATED S Sse LAR t--- MATERIAL NO. DOCUMENT NO. SHEET NO. no 2=t DRAFT WHERE APPLICABLE SEE TABLE _|SD-502430-002 2 OF 4 PE = _ MUST REMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H i WITHIN DIMENSIONS A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION Rev 0 2004/04/03 9 8 7 6 | 5 | 4 | 3 | 2 EN-02JA(021)10 9 8 7 6 5 4 3 2 4 a SKLAR (1.66) PULL OUT DIRECTION (0.83) 502430-xx19 yw (2.5) (5) hyST-7F TOP TAPE (3.32) ~ | N rT it] - | Aa = r Hog g _ | il q __ = a} | = 5 uf SECTION X-X = | | SL | | | Blo Ole Oo ele = 4 | 0.3 20.05 0 (2) Y | x x _ (1.36) ~79159" |_gz01 420.1 Rie $4020.2 ACCUMULATIVE PITCH 4020.2 SECTION Y-Y_ 24mm Bx eV PFT 24mm WIDTH CARRIER TAPE 15.18 502430-6410 64 14.38 502430-6010 60 12.38 502430-5010 30 __| 24 29.4 254 11.18 502430-4410 44 10.38 502430-4010 40 9.18 502430-3410 34 8.78 502430-3210 32 8.38 502430-3010 30 Re VT T-THE C B (A) MATERIAL No. CKT. CARRIER TAPE WIDTH MODEL _No. | 502430-**10 2s = GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE =rr (UNLESS SPECIFIED) MM ONLY TT METRIC | Cl PROJECTION Sss DRAWN BY DATE TITLE o S&F z SUNDER 4-2 RTAKEUCH! 2007/10/03 0.4 B-TO-B CONN. HGT=1.0 a ETA OVER OND CHECKED BY DATE PLUG ASSY EMBSTP PKG tS =< _|5|10 SSO UNDERT + --- MSASAO 2007/10/03 > Ww APPROVED BY DATE OR SEA 3088 + ficasag 2007/10/03] 08% MOLEX INCORPORATED Ngek= LAR +--- MATERIAL NO DOCUMENT NO SHEET NO. no 2=t DRAFT WHERE APPLICABLE SEE TABLE _|SD-502430-002 3 OF 4 PE = _ MUST REMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H i WITHIN DIMENSIONS A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION Rev 0 2004/04/03 9 8 7 6 | 5 | 4 | 3 | 2 EN-02JA(021)10 9 8 7 6 5 4 3 2 4 eq TILA (1.66) PULL OUT DIRECTION (0.83) |, +0.1 hyF7-F _02430-xx19 15%0 -| (2.5) TOP TAPE ig Sg | N oO o-8-o--8-oo-G (2.5) _ a rf (1.66) S al & | | | Hs a} x { < | "| 8 1 | II ma N tt 2 we ~ | b> 61-6 | & SECTION _X-X | 0.3 +0.05 (2) y. x x (1.36) 8 20.1 440.1 Ric F4020,2 ACCUMULATIVE PITCH 4020.2 SECTION _Y-Y 32mm 84 77-7 32mm WIDTH CARRIER TAPE 32 37.4 33.4 18.38 502430-8010 80 Xa VP T-THE C B (A) MATERIAL No. CKT. CARRIER TAPE WIDTH MODEL No. | 502430-xx10 2s = GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE =rr (UNLESS SPECIFIED) MM ONLY TT METRIC | Cl PROJECTION sss DRAWN BY DATE TITLE o S&F z SUNDER 4-2 RTAKEUCH! 2007/10/03 0.4 B-TO-B CONN. HGT=1.0 R ETA OVER OND CHECKED BY DATE PLUG ASSY EMBSTP PKG tS =< _|5|10 SSO UNDERT + --- MSASAO 2007/10/03 S WW APPROVED BY DATE Qa seg 30 _Nsasao 2007/0703] 40'S MOLEX INCORPORATED " S Sse LAR t--- MATERIAL NO. DOCUMENT NO. SHEET NO. no 2=t DRAFT WHERE APPLICABLE SEE TABLE _|SD-502430-002 4 0F 4 PE = _ MUST REMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX H i WITHIN DIMENSIONS A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION Rev 0 2004/04/03 9 8 7 6 | 5 | 4 | 3 | 2 EN-02JA(021)