BAV70 VISHAY Vishay Semiconductors Dual Switching Diode Features * Silicon Epitaxial Planar Diode * Fast switching dual diode with common cathode * This diode is also available in other configurations including:a dual common anode to cathode with type designation BAV99, a dual common anode with type designation BAW56, and a single diode with type designation BAL99. 3 18108 1 Mechanical Data Case: SOT-23 Plastic Package Weight: approx. 8 mg Packaging Codes/Options: E8/10 K per 13" reel (8 mm tape), 30 K/box E9/3K per 7" reel (8 mm tape), 30 K/box 2 Marking: JJ Absolute Maximum Ratings Tamb = 25 C, unless otherwise specified Parameter Test condition Reverse voltage, peak reverse voltage Forward current (continuous) Non repetitive peak forward current Value Unit 70 V IF 250 mA tp = 1 s IFSM 2 A tp = 1 ms IFSM 1 A tp = 1 s IFSM 0.5 Power dissipation 1) Symbol VR, VRM Ptot 350 A mW 1) Device on fiberglass substrate, see layout Maximum Thermal Resistance Tamb = 25 C, unless otherwise specified Parameter Test condition Thermal resistance junction to ambient air Junction temperature Storage temperature range 1) Symbol RJA Value 430 1) Unit C/W Tj 150 C Tj = Tstg - 65 to + 150 C Device on Fiberglass substrate, see layout on second page. Document Number 85546 Rev. 5, 10-Jul-03 www.vishay.com 1 BAV70 VISHAY Vishay Semiconductors Electrical Characteristics Tamb = 25 C, unless otherwise specified Parameter Max Unit IF = 1 mA VF 715 mV IF = 10 mA VF 855 mV IF = 50 mA VF 1 V IF = 150 mA VF 1.25 V VR = 70 V IR 2.5 A VR = 70 V, Tj = 150 C IR 50 A VR = 25 V, Tj = 150 C IR 30 A Diode capacitance VR = 0, f = 1 MHz CD 1.5 pF Reverse recovery time IF = 10 mA to IR = 1 mA, VR = 6 V, RL = 100 trr 6 ns Forward voltage Reverse current Test condition Symbol Min Typ. Typical Characteristics (Tamb = 25 C unless otherwise specified) IF - Forward Current ( mA) 1000 100 Tj =100C 10 Tj =25C 1 0.1 0.01 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 14356 V F - Forward Voltage ( V ) Figure 1. Forward Current vs. Forward Voltage www.vishay.com 2 Document Number 85546 Rev. 5, 10-Jul-03 BAV70 VISHAY Vishay Semiconductors Package Dimensions in mm top view 14372 Document Number 85546 Rev. 5, 10-Jul-03 www.vishay.com 3 BAV70 VISHAY Vishay Semiconductors Mounting Pad layout 0.031 (0.8) 0.035 (0.9) 0.079 (2.0) 0.037 (0.95) www.vishay.com 4 0.037 (0.95) 17417 Document Number 85546 Rev. 5, 10-Jul-03 BAV70 VISHAY Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 Document Number 85546 Rev. 5, 10-Jul-03 www.vishay.com 5