Clock Oscillator Selection Guide Surface Mount Clock Oscillator Selection Guide Kyocera has a wide range of clock oscillators with frequency and package size to meet various requirements. Standard Line Up Size (mm) VDD (V) Output Stability(ppm) -10 to +70C Load K50-3C K50H-3C K50S-3P CMOS 50, 30, 25 15pF max. LV-PECL 100(0 to +70C) 5.0 K50-HC CMOS 50, 30, 25 2.5 K30-2C K30-3C K30-3C(Suffix-HL) K30-HC CMOS 50, 30, 25, 20 50, 30, 25, 20 50, 30 50, 30, 25 50ohm 50pF max. 15pF max. 15pF max. 15pF max. 3.3 7x5 5x3.2 Series 3.3 5.0 50pF max. Frequency Range 1.5 to 80MHz 50 to 160MHz 106.25 to 312.5MHz 1.5 to 50MHz 50 to 68MHz 14 to 67MHz 1.8 to 160MHz 14 to 30MHz 1.8 to 50MHz Stability 50ppm(-10 to +70C) is our standard. (Except K50S-3P) 20ppm, 25ppm, 30ppm on certain frequencies only. Products for Wireless LAN Application(K30 Tight Tolerance) Size (mm) Frequency (MHz) VDD (V) Stability(ppm) -10 to +70C Standby Function Kyocera Part Number 22.0000 3.30 2.84 2.84 3.30 2.84 2.84 2.50 3.30 2.84 2.84 25 25 20 25 25 25 25 25 25 20 Yes Yes Yes Yes Yes No Yes Yes Yes Yes K30-3CU-SE22.0000 K30-3CU-SE40.0000VZ K30-3CW-SE40.0000VZ K30-3CU-SE44.0000 K30-3CU-SE44.0000VZ K30-3CU-SE44.0000LC K30-2CU-SE44.0000AM K30-3CU-SE80.0000 K30-3CU-SE80.0000VZ K30-3CW-SE80.0000VZ 40.0000 5x3.2 44.0000 80.0000 Note Low Current 7mA max. Low Voltage * Please contact us about K30 Tight Tolerance, more information to you. List of Part Numbers for the Fibre Channel and Network Equipments Frequency (MHz) VDD (V) Stability(ppm) -10 to +70C Standby Function 25.0000 3.3 50 Yes 53.1250 3.3 50 Yes 106.250 3.3 50 Yes 125.000 3.3 50 Yes 155.520 3.3 30 Yes Size (mm) Kyocera Part Number 7x5 5x3.2 7x5 5x3.2 7x5 5x3.2 7x5 5x3.2 7x5 5x3.2 K50-3C0-SE25.0000 K30-3C0-SE25.0000 K50-3C0-SE53.1250 K30-3C0-SE53.1250 K50H-3C0-SE106.250 K30-3C0-SE106.250 K50H-3C0-SE125.000 K30-3C0-SE125.000 K50H-3CS-SE155.520 K30-3CS-SE155.520 For further information, please contact us at our local sales offices nearest to you or by the web site. Note Ethernet LAN Fibre Channel Fibre Channel Giga-bit Ethernet SONET/SDH Clock Oscillator K50H-3C Series (7x5 SMD, 3.3V, CMOS) Features How to Order K50H-3C 0 - S E 125.0000 * Miniature Ceramic Package * Highly reliable with seam welding * CMOS output * Supply Voltage VDD=3.3V * 25ppm Available * Internal Bypass Capacitor * Low Jitter q Packaging(Tape & Reel 1Kpcs/reel) Note Standard specifications With only certain frequencies With only certain frequencies (Unit : mm) ;;;; ;;;; w ;;; ;;; Plating: Ni+Au Tolerance: 0.2 4.2 ;;; ;;; r 2.6 1.1 5.0 ;;;; ;;;;e ;;;; ;;;; ;;;; Recommended Land Pattern 0.6 q 5.08 1.6 0.7 1.4 Pin Connections q Control w Case GND e Output r VDD Enable/Disable Function Pin1 Pin3(Output) Open Active "H" Level Active "L" Level High Z(No-Oscillation) ;;; ;;; ;;; ;;; ;;; ;;; 5.08 (Unit : mm) ;;;; ;;;; ;;;; ;;;; ;;;; ;;;; 1.8 2.0 Dimensions 7.0 t qSeries(7x5 SMD, 3.3V) wFrequency Stability Code(See Table1) eDuty Ratio(S: 45% to 55% STD) rEnable/Disable Function(STD) tOscillation Frequency(Ex.: 125.0000MHz) Table1 Stability TOPR (C) Code (ppm) 0 50 S 30 -10 to +70 (Standard) U 25 F 100 -40 to +85 (Extend) G 50 w er Note: Since K50H series has Bypass Capacitor between VDD and GND. Specifications Item Frequency Range Frequency Stability Temperature Range Supply Voltage Symbol FSBY Storage TSTG Operating TOPR Max. Supply Operating Overall conditions: initial tolerance, operating temperature range, rated power supply voltage change, load change, aging(1year @25C), shock and vibration Standard Extend(option) ----VDD Current Consumption (Maximum Loaded) IDD Standby Current Duty Ratio(Symmetry) IST SYM Rise/Fall Time (10% VDD to 90% VDD Maximum Loaded) Tr/Tf Output Voltage-"L" Output Voltage-"H" Output Load Input Voltage-"L" Input Voltage-"H" Enable Time Disable Time Start-up Time Deterministic Jitter pk-pk 1Sigma jitter Conditions FOUT VOL VOH CL VIL VIH --------ST DJ 1sigma Stability: 50ppm, 100ppm(Ext Temp) Stability: 25ppm, 30ppm, 50ppm(Ext Temp) 50FOUT 85MHz 85<FOUT100MHz 100<FOUT135MHz 135<FOUT160MHz Standby Function @50% VDD 20% VDD to 80% VDD 50FOUT<100MHz 10% VDD to 90% VDD 20% VDD to 80% VDD 100FOUT160MHz 10% VDD to 90% VDD Min. Max. Units 50 -25 -30 -50 -55 -10 -40 -0.5 2.97 3.14 170 +25 +30 +50 +125 +70 +85 7.0 3.63 3.46 30 40 50 60 10 55 3.5 5.0 1.5 2.0 10% VDD MHz 15 30% VDD pF 45 90% VDD CMOS 70% VDD @Minimum operating Voltage to be 0sec. "Wavecrest DTS-2079" with VISI 6.3.1 shall measure jitter. Note: Please contact us for inquires about extended operating temperature range, available frequencies and other conditions. All electrical Characteristics are defined at the maximum load and operating temperature range. 5 150 10 2 4 ppm C Volt mA A % nS Volt Volt mS nS mS psec Clock Oscillator K50S-3P Series (7x5 SMD, 3.3V, LV-PECL) Features How to Order K50S-3P 1 - S E 312.500 * Miniature Ceramic Package * Highly reliable with seam welding * PECL output SAW Oscillator * Supply Voltage VDD=3.3V * Internal Bypass Capacitor * Low Jitter q Available Frequencys (MHz) 0 to +70 106.250 133.000 167.000 156.250 Dimensions ;; ;; t ;; 1.0 ; ; w 2.54 2.0 0.7 ; ; ;; ;; ;; ;; y ;; ;; ;; 5.08 ;;; ;; ;;; ;; ;;; ;; ;;; ;; ;;;2.54;; Plating: Ni+Au Tolerance: 0.2 4.3 5.0 ;; ;; r ;; Recommended Land Pattern 0.4 3.0 0.76 e ; ; 125.000 156.250 212.500 312.500 (Unit : mm) 7.0 Packaging(Tape & Reel 1Kpcs/reel) q 2.54 ;; ;; q w e r r r Pin Connections Enable/Disable NC Case GND Output Complementary Output VDD Enable/Disable Function Pin1 Pin4/Pin5 Open Active "H" Level Active "L" Level High Z(No-Oscillation) (Unit : mm) ;;; ;;; ;;; ;;; ;;; 1.0 1.3 100 1 TOPR (C) t qSeries(7x5 SMD, 3.3V SAW) wFrequency Stability Code(See Table1) eDuty Ratio(S: 45% to 55% STD) rEnable/Disable Function(STD) tOscillation Frequency(Ex.: 312.500MHz) Table1 Stability Code (ppm) w er Note: Since K50S series has Bypass Capacitor between VDD and GND. Specifications Item Frequency Range Frequency Stability Storage Operating Max. Supply Supply Voltage Operating Current Consumption Standby Current Duty Ratio(Symmetry) Rise/Fall Time Output Voltage-"L" Output Voltage-"H" Output Load Input Voltage-"L" Input Voltage-"H" Enable Time Disable Time Start-up Time Deterministic Jitter pk-pk 1Sigma jitter Peak to Peak Jitter Temperature Range Symbol FOUT FSBY TSTG TOPR ----VDD IDD IST SYM Tr/Tf VOL VOH ----VIL VIH --------ST DJ 1sigma Pk-Pk Conditions Overall conditions: initial tolerance, operating temperature range, rated power supply voltage change, load change, aging(1year @25C), shock and vibration Min. 106.25 Max. 312.5 Units MHz -100 +100 ppm -55 0 -0.5 3.14 Standby Function 50ohm, @50% output swing 50ohm, 20% VDD-80% VDD @Minimum operating Voltage to be 0sec. "Wavecrest DTS-2079" with VISI 6.3.1 shall measure jitter. Note: Please contact us for inquires about extended operating temperature range, available frequencies and other conditions. All electrical Characteristics are defined at the maximum load and operating temperature range. +125 +70 5.5 3.45 60 10 45 55 0.6 VDD-1.810 VDD-1.620 VDD-1.025 VDD-0.880 50 30% VDD 70% VDD 10 10 10 2 4 30 C Volt mA A % nS Volt ohm Volt mS mS mS psec Clock Oscillator K30/K50/K50H/K50S Series Test Circuits and Clock Timing Chart CMOS Output Test Circuits Clock Timing Chart(C-MOS Output) Test Point Pad4 A Pad3 Tr Tf VDD Pad1 Power Supply 90% VDD VOH Osillator Pad2 50% VDD CL V 0.01F E/D Control 10% VDD VOL GND T1 T0=1/FOUT Duty=T1/T0x100(%) Note: CL includes probe and test fixture capacitance PECL Output Test Circuits Clock Timing Chart(PECL Output) Tr Tf 2.380V Z0=50ohm A Output y t r 50ohm +2.0V 2.275V 50ohm Osillator V q w e Crossing Point 0.01F -1.3V 1.680V E/D Control Output 1.490V Marking Specifications Table1 K50-3C/K50-HC/K50H-3C/K50S-3P Series Output Frequency Pin1 Indication Model 125.000 0H A08 Manufacturing Date Code Output Frequency 7 digits indication inclusive of decimal point, round off the fractions to four decimal places. Ex.) 14.31818MHz "14.3182" Model See Table1 L16.000 KC W01 Model and Output Frequency Manufacturing Date Code Output Frequency Output frequency is 6 digits indication inclusive of decimal point, round down the fractions to three decimal places. Ex.) 14.31818MHz "14.318" Model See Table2 TOPR (C) -10 to +70 (STD) -40 to +85 (Extend) K50-3Cx-SE ----0M SM UM FM GM Model Code K50-HCx-CSE K50H-3Cx-SE K50S-3Px-SE --------1P 0B 0H ----SB SH ----UB UH ----FB FH ----GB GH ----- Topr 0 to +70C Table2 K30-2C/K30-3C/K30-HC Series Pin1 Indication Stability Code ppm 1 100 0 50 S 30 U 25 F 100 G 50 Stability Code ppm 0 50 S 30 U 25 W 20 F 100 G 50 TOPR (C) -10 to +70 (STD) -40 to +85 (Extend) K30-2Cx-SE RxxPxxx SxxPxxx WxxPxxx GxxPxxx PxxWxxx RxxWxxx Model Code K30-3Cx-SE Rxx.xxx Sxx.xxx Wxx.xxx Gxx.xxx PxxExxx RxxExxx K30-HCx-CSE Bxx.xxx Cxx.xxx Dxx.xxx -----AxxExxx BxxExxx Clock Oscillator K30/K50/K50H/K50S Series Taping Specifications Reel Dimensions W1 E D A N C Series K50-3C K50-HC K50H-3C K50S-3P K30-2C K30-3C K30-HC (Unit : mm) A N W1 W2 C D E 180 +0 -3 60 +1 -0 17.00.2 19.51.0 13.00.2 21.00.8 2.00.5 180 +0 -3 60 +1 -0 13.00.3 17.01.4 13.00.2 21.00.8 2.00.5 W2 Dimensions Emboss Carrier Tape K Series K50-3C K50-HC K50H-3C K50S-3P D0 P2 W01 B0 1M 14.3182 A0 P1 D1 Series K30-2C K30-3C K30-HC Reflow Profile(Lead Free Compatible) 300 10sec. max. Peak 260C max. 2555C 230C Temperature(C) 250 200 150 to 180C 150 100 50 0 90 to 120sec. B0 W F E P1 5.40.1 7.40.1 16.00.2 7.50.1 1.750.1 8.00.1 P2 P0 D0 T K D1 0.30.05 2.00.1 1.550.1 2.00.1 4.00.1 1.5 +0.1 -0 W F T E P0 (Unit : mm) A0 30 to 40sec. Time(sec.) Allowable Reflow times: Maximum twice A0 B0 W F E P1 3.70.1 5.50.1 12.00.3 5.50.05 1.750.1 8.00.1 P2 P0 D0 T K D1 2.00.05 4.00.1 1.5 +0.1 -0 0.30.05 1.40.1 1.5 +0.1 -0 Clock Oscillator K30/K50/K50H/K50S Series Remarks on Usage A) Storage Condition Parts should be stored in temperature range of -5 to +40C, humidity 40 to 60% RH, and avoid direct sunlight. Then use within 6 months. B) Handling Condition Although oscillators have protection circuit against static electricity, the inside IC may be damaged. when excess static electricity is applied, When mounting on PCB, make sure the direction of oscillators are correct, otherwise oscillators will increase in temperature and may be damaged. Please do not use oscillators under unfavorable condition such as beyond specified range in catalog or specification sheet. Please keep oscillators away from water, salt water or harmful gas. K50H-3C/K50S-3P series should be stored in humidity-controlled area after the package is unsealed, in temperature +25 5C, under humidity of 65%RH, and should be mounted on PCB within 7 days. C) Soldering Use oscillators only with IR reflow for soldering. D) Washing Condition Ultrasonic cleaning is available. However there is a possibility that crystal in oscillator may be damaged under certain condition. Therefore please test before use. After washing, please dry oscillators completely. Otherwise water drops between oscillators and PCB may cause electro-migration.