HITANO ENTERPRISE CORP. FR3A THRU FR3K TECHNICAL SPECIFICATIONS OF SURFACE MOUNT FAST RECOVERY RECTIFIER VOLTAGE RANGE - 50 to 800 Volts CURRENT - 3.0 Amperes FEATURES * ldeal for surface mounted applications * Low leakage current * Glass passivated junction SMC ( DO-214AB ) .128(3.25) .108(2.75) MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V- 0 rate flame retardant *Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 * Polarity: As marked * Mounting position: Any * Weight: 0.24 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage o Maximum Average Forward Rectified Current T A = 75 C Peak Forward Surge Current IFM(surge): 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Forward Voltage at 3.0A DC Maximum DC Average Reverse Current at Rated DC Blocking Voltage Maximum Reverse Recovery Time (Note 3) Typical Thermal Resistance (Note 2) Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range @T A = 25o C @T A = 125 o C SYMBOL VRRM FR3A FR3B FR3D FR3G FR3J FR3K 50 100 150 200 300 400 UNITS Volts V RMS 35 70 105 140 210 280 Volts VDC 50 100 150 200 300 400 Volts IO 3.0 Amps I FSM 100 Amps VF 1.2 10 300 Volts IR trr 150 uAmps 250 RJL CJ 10 60 T J , T STG -65 to + 175 NOTES : 1. Measured at 1.0 MHz and applied reverse voltage of 4.0VDC 2. Thermal Resistance (Junction to Ambient), 0.4x0.4in2 (10.0X10.0mm2) copper pads to each terminal. 3. Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A. 500 nSec 0 C/W pF 0 C RATING AND CHARACTERISTIC CURVES ( FR3A THRU FR3K )