Features * * * * * * Regulated Converters Regulated output with internal linear regulator Isolated 1W power in SMD package Up to 2kVDC isolation Industry standard pinout -40C to +100C operating temperature IEC/EN/UL62368-1 certified, CB report Description The R1ZX is similar to the R1SX but with the addition of an internal linear regulator to give a precise, load-independent and low noise output. The output is also continuously short circuit protected. In the event of a continuous overload or over-temperature condition, the output will shut down thus protecting the converter from damage. The output will automatically restart once the fault condition has been lifted. Typical applications include isolated 5V supplies for sensor, bus-interface and test and measurement circuits. DC/DC Converter R1ZX 1 Watt SMD Single Output Selection Guide Part Number nom. Input Voltage [VDC] Output Voltage [VDC] Output Current [mA] Efficiency typ. (1) [%] max. Capacitive Load (2) [F] 5 5 200 68 1000 R1ZX-0505/P (3) Notes: Note1: Efficiency is tested at nominal input and full load at +25C ambient Note2: Max Cap Load is tested at nominal input and full resistive load Model Numbering E224736 R1ZX-__ __ /_ P-R Output Power Packaging (5) nom. Input Voltage Protection (3) Isolation Voltage (4) nom. Output Voltage Notes: Note3: Note4: Note5: Ordering Examples: R1ZX-0505/P-R R1ZX-0505/HP-R R1ZX-0505/P-Tray R1ZX-0505/HP-Tray 5Vin 5Vin 5Vin 5Vin www.recom-power.com UL62368-1 certified CAN/CSA-C22.2 No. 62368-1-14 certified UL60950-1 certified CAN/CSA-C22.2 No. 60950-1-07 certified IEC/EN62368-1 certified IEC/EN60950-1 certified CB report EN55032 compliant standard part is with continuous short circuit protection without suffix, standard isolation voltage (1kVDC/1 second) with suffix /H", high isolation voltage (2kVDC/1 second) with suffix -R", standard packaging tape and reel with suffix -Tray" for optional tray packaging 5Vout 5Vout 5Vout 5Vout Single Output Single Output Single Output Single Output 1kVDC/ 1 minute isolation 2kVDC/1 minute isolation 1kVDC/ 1 minute isolation 2kVDC/1 minute isolation with SCP function with SCP function with SCP function with SCP function REV.: 1/2019 tape and reel packaging tape and reel packaging tray packaging tray packaging ECO-1 R1ZX DC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Min. Condition Typ. Max. Internal Input Filter capacitor Input Voltage Range 5.0% nom. Vin = 5VDC 300mA Input Current Quiescent Current 20mA nom. Vin = 5VDC Minimum Load 0% 20kHz Internal Operating Frequency Output Ripple and Noise (6) 20MHz BW 30mVp-p 100mVp-p Notes: Note6: Measurements are made with a 0.1F MLCC across output. (low ESR) Efficiency vs. Load 100 90 Efficiency [%] 80 70 60 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] REGULATIONS Parameter Condition Value Output Accuracy -0.5 typ. / 2.0% max. Line Regulation low line to high line, full load Load Regulation 0% to 100% load Deviation vs. Load 1.0% max. 0.5 typ. / 1.0% max. 2.0 1.5 Deviation [%] 1.0 0.5 0 -0.5 -1.0 -1.5 -2.0 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] www.recom-power.com REV.: 1/2019 ECO-2 R1ZX DC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) PROTECTIONS Parameter Type Short Circuit Protection (SCP) Value below 100mW Isolation Voltage continuous, automatic recovery standard tested for 1 second rated for 1 minute (7) 1kVDC 500VAC with suffix "/H" tested for 1 second rated for 1 minute (7) 2kVDC 1kVAC 10G min. I/P to O/P Isolation Resistance 100pF max. Isolation Capacitance 1A max. 2A max. standard with suffix "/H" Leakage Current Insulation Grade Notes: Note7: Note8: functional For repeat Hi-Pot testing, reduce the time and/or the test voltage Refer to local safety regulations if input over-current protection is also required. Recommended fuse: slow blow type ENVIRONMENTAL Parameter Condition Operating Temperature Range Value full load @ natural convection 0.1m/s (see graph) Operating Altitude -40C to +65C 5000m Operating Humidity non-condensing 5% - 95% RH max. Pollution Degree PD2 Vibration according to MIL-STD-202G MTBF according to MIL-HDBK-217F, G.B. +25C +65C 14400 x 10 hours 3700 x 10 hours Derating Graph (@ Chamber and natural convection 0.1m/s) 100 90 Output Load [%] 80 70 60 50 40 30 20 10 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 65 85 Ambient Temperature [C] www.recom-power.com REV.: 1/2019 ECO-3 R1ZX DC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Audio/video, information and communication technology equipment - Safety requirements UL62368-1, 2nd Edition, 2014 CAN/CSA -C22.2 No. 62368-1-14, 2nd Edition E224736 UL60950-1, 2nd Edition, 2014 CAN/CSA C-22.2 No. 60950-1-07, 2nd Edition Information Technology Equipment, General Requirements for Safety Audio/video, information and communication technology equipment - Safety requirements (CB Scheme) Standard IEC62368-1:2014, 2nd Edition E224736-4788277362-1 Audio/video, information and communication technology equipment - Safety requirements EN62368-1:2014 + A11:2017 Information Technology Equipment, General Requirements for Safety (CB Scheme) E224736-4788277362-2 Information Technology Equipment, General Requirements for Safety IEC60950-1:2005, 2nd Edition + A2:2013 EN60950-1:2006 + A2:2013 RoHS2+ RoHS 2011/65/EU + AM2015/863 EMC Compliance Condition Electromagnetic Compatibility of Multimedia Equipment - Emission Requirements Standard / Criterion with external filter (see filter suggestion below) ESD Electrostatic discharge immunity test EN55032:2015 + AC:2016, Class B Air: 6kV ; Contact: 4kV EN61000-4-2:2009, Criteria A Fast Transient and Burst Immunity 0.5kV EN61000-4-4:2012, Criteria A Surge Immunity 1.0kV EN61000-4-5:2017, Criteria A EMC Filtering Suggestions for EN55032 L1 +Vin +Vin +Vout -Vin -Vout +Vout C1 -Vin Component List Class A -Vout Component List Class B C1 L1 C1 L1 2.2F 10V MLCC 5.6H choke RLS-567 10F 10V MLCC 5.6H choke RLS-567 DIMENSION and PHYSICAL CHARACTERISTICS Parameter Type Value Material base PCB black plastic, (UL94V-0) FR4, (UL94V-0) Dimension (LxWxH) 15.24 x 11.10 x 8.5mm Weight 1.6g typ. continued on next page www.recom-power.com REV.: 1/2019 ECO-4 R1ZX DC/DC Converter Series Specifications (measured @ Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) CG 8.5 max. Pin Connection Pin # Single 1 -Vin 2 +Vin 4,5 -Vout 7 +Vout 10 NC 0.25 8.0 suckable area Dimension Drawing (mm) 2.50 0.50 CG= center of gravity NC= no connection Tolerance: xx.x= 0.5mm xx.xx= 0.25mm 0.80 11.10 4x2.54= 10.16 Pin dimension: Recommended Footprint Details 4 5 10 10.7 Bottom View 10 7 Top View 1 2 7 12.07 1 2 0.1mm 1.27 2.54 15.24 4 5 2.54 PACKAGING INFORMATION Packaging Dimension (LxWxH) Packaging Quantity tape and reel (carton) reel 355.0 x 340.0 x 35.0mm 330.2 x 330.2 x 30.0mm tray 260.0 x 205.0 x 27.0mm tape and reel tray Tape Width 250pcs 30pcs 24.0mm Storage Temperature Range -55C to +125C Storage Humidity 5% - 95% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM's explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 1/2019 ECO-5