2KBP005M thru 2KBP10M, 3N253 thru 3N259 Vishay Semiconductors formerly General Semiconductor Glass Passivated Single-Phase Bridge Rectifier Case Style KBPM Features 0.600 (15.24) 0.560 (14.22) 0.125 x 45o (3.2) 0.460 (11.68) 0.420 (10.67) Dimensions in inches and (millimeters) 60 (15.2) MIN. 0.034 (0.86) 0.028 (0.76) DIA. Reverse Voltage 50 to 1000 V Forward Current 2.0 A * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * This series is UL listed under Recognized Component Index, file number E54214 * Typical IR less than 0.1A * High case dielectric strength * Ideal for printed circuit boards * High temperature soldering guaranteed: 260C/10 seconds at 5 lbs. (2.3kg) tension 0.500 (12.70) 0.460 (11.68) 0.50 (12.7) Min. Mechanical Data 0.060 (1.52) Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Polarity: Polarity symbols marked on case Mounting Position: Any Weight: 0.06 oz., 1.7 g Packaging codes/options: 1/600 EA. per Bulk Tray Stack 0.160 (4.1) 0.140 (3.6) 0.105 (2.67) 0.085 (2.16) 0.200 (5.08) 0.180 (4.57) Polarity shown on front side of case: positive lead by beveled corner Maximum Ratings & Thermal Characteristics Parameter Ratings at 25C ambient temperature unless otherwise specified. 2KBP 005M 2KBP 01M 2KBP 02M 2KBP 04M 2KBP 2KBP 06M 08M 2KBP 10M Symbols 3N253 3N254 3N255 3N256 3N257 3N258 3N259 Units * Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V * Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V * Maximum DC blocking voltage Maximum average forward output rectified current at TA=55C IF(AV) 2.0 A * Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method) TJ=150C IFSM 60 A I2t 15 A sec RJA RJL 30 11 C/W -55 to +165 C Rating for fusing (t < 8.3ms) Typical thermal resistance per leg (1) * Operating junction and storage temperature range TJ, TSTG Electrical Characteristics 2 Ratings at 25C ambient temperature unless otherwise specified. * Maximum instantaneous forward voltage drop per leg at 3.14A VF 1.1 V * Maximum DC reverse current TA=25C at rated DC blocking voltage per leg TA=125C IR 5.0 500 A Typical junction capacitance per leg at 4.0V, 1MHZ CJ 25 pF Notes: (1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with, 0.47 x 0.47" (12 x12mm) copper pads * JEDEC registered values Document Number 88532 28-Feb-02 www.vishay.com 1 2KBP005M thru 2KBP10M, 3N253 thru 3N259 Vishay Semiconductors formerly General Semiconductor Ratings and Characteristic Curves (TA = 25C unless otherwise noted) Fig. 1 -- Derating Curve Output Rectified Current 60 60 HZ Resistive or Inductive Load 1.5 P.C.B. Mounted with 0.47 x 0.47" (12 x 12mm) Copper Pads Capacitive Load I(pk) 5.0 = 10 I(AV) (Per Leg) 20 0.5 0 20 Peak Forward Surge Current (A) Average Forward Output Current (A) 2.0 1.0 Fig. 2 -- Maximum Non-Repetitive Peak Forward Surge Current Per Leg TJ = 150C Single Sine-Wave (JEDEC Method) 50 40 30 20 10 1.0 Cycle 0 40 60 80 100 120 140 10 1 160 170 Ambient Temperature (C) Number of Cycles at 60 HZ Fig. 3 -- Typical Forward Characteristics Per Leg Fig. 4 -- Typical Reverse Leakage Characteristics Per Leg 20 100 Instantaneous Reverse Current (A) Instantaneous Forward Current (A) 100 10 1 TJ = 25C Pulse Width = 300s 1% Duty Cycle 0.1 0.01 TJ = 125C 10 1 0.1 TJ = 25C 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Instantaneous Forward Voltage (V) TJ = 100C 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig. 5 -- Typical Junction Capacitance Per Leg Junction Capacitance (pF) 100 TJ = 25C f = 1.0MHZ Vsig = 50mVp-p 10 1 0.1 1 10 100 Reverse Voltage (V) www.vishay.com 2 Document Number 88532 28-Feb-02