74VHCU04MSCX - Fairchild Semiconductor

July 1993

Revised April 1999

74VHCU04 Hex Inverter

74VHCU04

Hex Inver te r

General Descript ion

The VHCU04 is an advanced high speed CMOS Inverter

fabricated with silicon gate CMOS technology. It achieves

the high speed operation similar to equivalent Bipolar

Schottky TTL while maintaining the CMOS low power dissi-

pation.

Since the internal circuit is composed of a single stage

inverter, it can be used in analog applications such as crys-

tal oscillators. An input protection circuit en sures tha t 0V to

7V can be applied to the input pins without regard to the

supply volta ge. This device can be used to inter face 5V to

3V systems and two supply systems such as battery

back u p. T his c ir c ui t pr ev e nt s d e vi ce d es tr uc t io n du e to m is -

matched supply and input voltages.

Features

■High Speed: tPD = 3.5 ns (typ) at VCC = 5V

■Low Power Dissipation: ICC = 2 µA (Max) @ TA = 25°C

■High Noise Immunity: VNIH = VNIL = 28% VCC (Min)

■Power down protection is provided on all inputs

■Low Noise: VOLP = 0.8V (Max)

■Pin and Function Compatible with 74HCU04

Ordering Code:

Surface m ount pa c k ages are als o available on Tape and Re el. Specify by appendi ng the suffix let te r “X” to the ordering co de.

Logic Symbol

IEEE/IEC

Pin Descriptions

Connection Diagram

Truth Table

Order Number Package Number Package Description

74VHCU04M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow

74VHCU04SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide

74VHCU04MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide

74VHCU04N N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide

Pin Names Description

AnInputs

OnOutputs

www.fairchildsemi.com 2

74VHCU04

Absolute Maximum Ratings(No te 1) Recommended Operating

Conditions (Note 2)

Note 1: Absolute Maximum Ratings are values beyond which the device

may be da maged or ha ve its useful li fe impaire d. The datab ook specific a-

tions should be met, without exception, to ensure that the system design is

reliable over its pow er supply, te mperature, a nd output/in put loading vari-

ables. Fa irc hild does not rec om mend operation out s ide databook sp ec if ic a-

tions.

Note 2: Unused inputs must be held HIGH or LOW. They may not float.

DC Electrical Characteristics

Supply Voltage (VCC)−0.5V to +7.0V

DC Input Voltage (VIN)−0.5V to +7.0V

DC Output Voltage (VOUT)−0.5V to VCC + 0.5V

Input Di ode Current (IIK)−20 mA

Output Diode Current (IOK)±20 mA

DC Output Current (IOUT)±25 mA

DC VCC/GND Current (ICC)±50 mA

Storage Temperature (TSTG)−65°C to +150°C

Lead Temperature (TL)

(Soldering, 10 seconds) 260°C

Supply Voltage (VCC) 2.0V to +5.5V

Input Voltage (VIN)0V to +5.5V

Output Voltage (VOUT)0V to V

Operating Temperature (TOPR)−40°C to +85°C

Symbol Parameter VCC

(V)

TA = 25°CT

A = −40°C to +85°CUnits Conditions

Min Typ Max Min Max

VIH HIGH Level 2.0 1.70 1.70 V

Input V oltag e 3.0 − 5.5 0.8 VCC 0.8 VCC

VIL LOW Level 2.0 0.30 0.30 V

Input V oltag e 3.0 − 5.5 0.20 VCC 0.20 VCC

VOH HIGH Level 2.0 1.8 2.0 1.8 VIN = VIL IOH = −50 µA

Output Voltage 3.0 2.7 3.0 2.7 V

4.5 4.0 4.5 4.0

3.0 2.58 2.48 VVIN = GND IOH = −4 mA

4.5 3.94 3.80 IOH = −8 mA

VOL LOW Level 2.0 0.0 0.2 0.2 VIN = VIH IOL = 50 µA

Output Voltage 3.0 0.0 0.3 0.3 V

4.5 0.0 0.5 0.5

3.0 0.36 0.44 VVIN = VCC IOL = 4 mA

4.5 0.36 0.44 IOL = 8 mA

IIN Input Leakage Current 0 − 5.5 ±0.1 ±1.0 µAV

IN = 5.5V or GND

ICC Quiescent Supply Current 5.5 2.0 20.0 µAV

IN = VCC or GND

3 www.fairchildsemi.com

74VHCU04

Noise Characteri stics

Note 3: Parame te r guaranteed by des ign.

AC Electrical Characteristics

Note 4: CPD is defined as th e v alue of th e intern al equivalent capa c it ance whic h is calculated fr om t he operating cu rrent consumptio n w it ho ut load. Avera ge

operati ng c urrent ca n be obtained by the equation : ICC (opr.) = CPD * VCC * fIN + ICC/6 (per gate).

Symbol Parameter VCC

(V) TA = 25°CUnits Conditions

Typ Limits

VOLP Quiet Output Maximum 5.0 0.5 0.8 V CL = 50 pF

(Note 3) Dynamic VOL

VOLV Quiet Output Minimum 5.0 −0.5 −0.8 V CL = 50 pF

(Note 3) Dynamic VOL

VIHD Minimum HIGH Level 5.0 4.0 V CL = 50 pF

(Note 3) Dynamic Input Voltage

VILD Maximum LOW Level 5.0 1.0 V CL = 50 pF

(Note 3) Dynamic Input Voltage

Symbol Parameter VCC

(V)

TA = 25°CT

A = −40°C to +85°CUnits Conditions

Min Typ Max Min Max

tPHL Propagation Delay 3.3 ± 0.3 5.0 8.9 1.0 10.5 ns CL = 15 pF

tPLH 7.5 11.4 1.0 13.0 CL = 50 pF

5.0 ± 0.5 3.5 5.5 1.0 6.5 ns CL = 15 pF

5.0 7.0 1.0 8.0 CL = 50 pF

CIN Input Capacitance 5 10 10 pF VCC = Open

CPD Power Dissipation 9 pF (Note 4)

Capacitance

www.fairchildsemi.com 4

74VHCU04

Physical Dimensions inches (millimeters) unless otherwise noted

14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow

Package Number M14A

14-Lead Sma ll Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide

Package Number M14D

5 www.fairchildsemi.com

74VHCU04

Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide

Packag e Num be r MTC 14

Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.

74VHCU04 Hex Inverter

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD

SEMICONDUCTOR CORPORATION. As used herein:

1. Life suppor t de vices o r systems a re devices or syste ms

which, (a) are intended for surgical implant into the

body, or (b) support or sustain life, and (c) whose failure

to perform when properly used in accordance with

instructions for use provided in the labeling, can be rea-

sonably expected to result in a significant injury to the

user.

2. A critical compon ent i n any compon ent of a life su pport

device or system whose failure to perform can be rea-

sonabl y ex pect ed to ca use the fa i lure of the life su pp ort

device or system, or to affect its safety or effectiveness.

www.fairchildsemi.com

Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide

Package Number N14A