ENFIS QUATTRO Mini Air Cooled Light Engine Rich mono spot source and colour/CCT changing with 144 high-power LEDs Features & Benefits Two Formats * Plug & Play * Just plug in and go straight from the box! * Luminaire integration kit * Array on connectorized PCB with mounting holes. * Separately housed driver module Superior colour mixing with dense packaging and interleaving of colours 4.3 Billion colours * Rich colours and wide dynamic range * 4 x 256 step dimming DMX512 compatible Smart thermal protection system Life-long 100% Lumen Full colour/colour temperature maintenance control and monitoring System 3-year warranty 140W: High Power intense light from a 4cm2 array Applications & Markets Architectural lighting * * * * * Wavelength Typical Light Output 365nm 2850 mW 375nm 4750 mW 405nm 13600 mW 465nm 16300 mW 520nm 5985 mW 595nm 4400 mW 630nm 13170 mW 870nm 11200 mW 4250K 3465 llm RGBA 2385 lm RGBW 2575 lm Hi-Cri 2675 lm Quattro-Mini Air Cooled Light Engine Rev 5 July 08 Club/bar lighting Theatre spot gel replacement Moving spots Colour/CCT-changing illuminator light sources Retail lighting * Outline Specification Exterior/interior wallwashing Interior colour/CCTvariable lighting Fibre optic lighting * Exterior floodlights Entertainment lighting * * Exterior buried spotlights * Colour/CCT-variable spotlights Display lighting ENFIS LIMITED Technium 2, Kings Road, Swansea Waterfront, Swansea, SA18PJ, UK Tel +44 (0)1792 485660 Fax +44 (0)1792 485537 www.enfis.com info@enfis.com ENFIS QUATTRO Mini Air Cooled Light Engine Technical Specification Electro-Optical Characteristics Colour SUVA UVA Violet Blue Green Amber Red NIR Neutral White RGBA RGBW Hi Cri Peak Wavelength (nm) Typ. Light Output (mW) Typ. Light Output (lm) Total Electrical Power (W) 365 2850 - 100 375 4750 - 100 405 13600 - 140 465 16630 1005 140 520 5985 2660 140 595 4400 2085 140 630 13170 2080 140 870 11200 - 140 3900-4600K - 3465 140 - - 2385 140 - - 2575 140 - - 2675 140 Electronics: Technical Specification Operating temperature Storage temperature Input To Driver Input voltage -10C to +45C -20C to +85C 48V DC <5A Please contact Enfis Ltd for further information Ambient temperature = 25C LED Driver PCB Efficient LED driver based on switch mode technology Temperature monitoring and control USB/Serial PC interface Static Electricity Care must be taken when handling, these products are sensitive to static electricity . Observe static handling precautions. Connectivity TTL interface with USB convertor (USB connector head provided) Cleaning Avoid touching the LED array surface. To clean--BLOW surface with either dry air or nitrogen gas Thermal Management Composite metal heatsink with integrated low noise DC fan - Low thermal resistance System Handling LED Array Contact with the encapsulation on the surface of the LED array must be avoided to prevent damage. Do not apply pressure to the encapsulation or allow it to come into contact with sharp objects. During operation the encapsulation will be hot and contact should be avoided. Quattro Mini Air Cooled Light Engine Rev 5 July 08 Eye Safety Precautions The light output of the products may cause injuries to human eyes in circumstances where the products are viewed directly with unshielded eyes for more than a few seconds. Please refer to IEC 60825-1:2001 for further information ENFIS LIMITED Technium 2, Kings Road, Swansea Waterfront, Swansea, SA18PJ, UK Tel +44 (0)1792 485660 Fax +44 (0)1792 485537