PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
INSTANTANEOUS FORWARD VOLTAGE, (V)
( ,TNERRUC DRAWROF SUOENATNATSNI µ)A
AMBIENT TEMPERATURE, (OC)
0
0.01
1.0
0.1
10
100
1000
)A( ,TNERRUC DRAWROF EGAREVA
CJ)Fp( ,ECNATICAPAC NOITCNUJ ,
0
0.5
1.0
1.5
2.0
20 40 60 80 100 120 140
175125 1505025 75 1000
0 0.5 1.0 2.5 3.5 4.0 4.52.0
0.1
1.0
10
20
1.5 3.0 5.0
RATING AND CHARACTERISTICS CURVES ( SM4001 THRU SM4007 )
FIG.3 TYPICAL INSTANTANEOUS FORWARDFIG.3 TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS CHARACTERISTICS
FIG.1 TYPICAL FORWARD CURRENTFIG.1 TYPICAL FORWARD CURRENT
DERATING CURVE DERATING CURVE
FIG.2 TYPICAL REVERSEFIG.2 TYPICAL REVERSE
CHARACTERISTICS CHARACTERISTICS
REVERSE VOLTAGE, (V)
)A( ,TNERRUC ESREVE
R
SUOENA
T
NATS
N
I
0.1
1
8
6
4
2
10
20
40
400.4 1.0 4 10 80
FIG.4 TYPICAL JUNCTION CAPACITANCE FIG.4 TYPICAL JUNCTION CAPACITANCE
NUMBER OF CYCLES AT 60Hz
)A(
,
T
NER
R
U
C EGR
US
DRAW
R
O
F
KAEP
1
10
0
15
25
30
20
2 4 6 8 10 20 40 80 100
FIG.5 MAXIMUM NON-REPETITIVE FORWARDFIG.5 MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT SURGE CURRENT
Single Phase Half Wave 60Hz
Resistive or Inductive Load
0.375" (9.5mm) Lead Length
T
J
= 25 OC
Pulse width=300 S
1% Duty Cycle
T
J
= 25 OC
8.3mS Single Half Sine-Wave
JEDEC Method
T
A
= 25 OC
T
A
= 75 OC
T
A
= 100 OC
Mounting Pad Layout
Dime n s i o n s in i n c h e s and ( m i l l imet e r s )
.100 (2.54)
.200 (5.08)
.300 (7.62)
.100 (2.54)
.100 (2.54) F-SLOT WIDTH
OPTIMUM PAD SIZE
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.
DISCLAIMER NOTICE
