Customer :
Ordercode:
Description :
Diameter 14mm
A16.5 max. mm
B7.5 ± 1.0 mm
C0.8 ± 0.05 mm
D6.0 typ. mm
D8.6 max. mm
E20.5 max. mm
F25.0 min. mm
G4.3 ± 1.0 mm
Properties Value Unit Tol.
max. AC
Operating Voltage
max. DC
Operating Voltage
Withstanding
Surge Current
max.
Energy
WE-S
WE-S WE-S
WE-S
444611
444611444611
444611
max.
YM*
YM* YM*
YM*
Clamping Voltage
Voltage Protection
Rating
33%
+25°C
Body Insulation: Storage Temperature: -20°C … + 60°C
Coating: Max. Operating Temperature: -40°C … +125°C
Approvals: Max. Ambient Temperature: -40°C … +115°C
VDE (40016998) & IEC 60950-1 Annex Q Max. Response Time: 25ns
CSA (224856)
JB Version 1
2010-04-19
Name Modification Date
±10%
max
8/20µs
10/1000µs
W
max
230.0
V
DC
615
pF
typ
D
Test equipment:
1 kHz
C
P
270
6000 / 3000
V / A 2000
Rated Power
V
50A @ 8/20µs
v
Cl
1240 V
1mA
V
Var
750
max
i
max
max
V
RMS
max
A
Epoxy, UL 94V-0, halogen free
EMC Partner MIG0624LP1 for max. Surge Current and Energy
max
460
..................................................................................
..................................................................................
..................................................................................
Würth Elektronik
EMC Partner MIG0603CLV2 for Clamping Voltage
2500Vrms Withstanding Voltage
Part Branding (digit 4-9 of ordercode)
Approvals (see F)
UL1449 3rd (E332875) for use in Type 2 SPD
A
Dimensions:
Varistor Voltage
Capacitance
V
6000
Disk Varistor HighSurge WE-VD
820444611E
Würth Elektronik eiSos GmbH & Co. KG
Würth Elektronik eiSos GmbH & Co. KGWürth Elektronik eiSos GmbH & Co. KG
Würth Elektronik eiSos GmbH & Co. KG
D-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Phone (+49) (0) 7942 - 945 - 0 · Fax (+49) (0) 7942 - 945 - 400
Checked
0.6
Continuous
P
max
W
Agilent E4980A LCR Meter for Capacitance
F
Material & approvals:
Customer
http://www.we-online.com
Specification for Release
DATE : 2010-04-19
max
J
Date
..................................................................................
Signature
Approved
Test Conditions
C
Body marking:
B
Electrical properties:
E
Test conditions:
Humidity:
Temperature:
V
Keithley 2410 for Varistor Voltage
WESURGE from Würth Elektronik
Date Code & Internal Symbol
General Release:
G
General specifications:
V
max
G
PAGE 1 OF 5
Customer :
Ordercode:
Description :
JB Version 1
2010-04-19
Name Modification Date
..................................................................................
Date Signature
Würth Elektronik eiSos GmbH & Co. KG
Würth Elektronik eiSos GmbH & Co. KGWürth Elektronik eiSos GmbH & Co. KG
Würth Elektronik eiSos GmbH & Co. KG
D-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Phone (+49) (0) 7942 - 945 - 0 · Fax (+49) (0) 7942 - 945 - 400
http://www.we-online.com
..................................................................................
..................................................................................
Checked Approved
Specification for Release
Disk Varistor HighSurge WE-VD
DATE : 2010-04-19
Würth Elektronik
H
Typical I/V Characteristic:
General Release:
Customer
..................................................................................
820444611E
This electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and
reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine,
transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be
informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that
require high safety and reliability functions or performance.
100
1 000
1,E-6 1,E-5 1,E-4 1,E-3 1,E-2 1,E-1 1,E+0 1,E+1 1,E+2 1,E+3 1,E+4
Voltage [V]
Current [A]
Max. Leakage Current Max. Clamping Voltage
PAGE 2 OF 5
Customer
:
Ordercode:
Description :
JB Version 1
2010-04-19
Name Modification Date
820444611E
Disk Varistor HighSurge WE-VD
Specification for Release
..................................................................................
I
Typical Pulse Lifetime Derating:
General Release:
Customer
..................................................................................
..................................................................................
..................................................................................
Date Signature
http://www.we-online.com
Checked Approved
Würth Elektronik eiSos GmbH & Co. KG
Würth Elektronik eiSos GmbH & Co. KGWürth Elektronik eiSos GmbH & Co. KG
Würth Elektronik eiSos GmbH & Co. KG
D-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Phone (+49) (0) 7942 - 945 - 0 · Fax (+49) (0) 7942 - 945 - 400
Würth Elektronik
This electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and
reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine,
transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be
informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that
require high safety and reliability functions or performance.
1
2
10
100
1 000
10 000
100 000
1 000 000
1
10
100
1 000
10 000
10 100 1 000 10 000
imax [A]
Pulse Duration [µs]
No. of Pulses
Note:
Varistors do not have an endless lifetime. Also a well dimensioned varistor may fail due to enormous overload. This will result in heating, smoke emission
and / or displosion of varistor itself. Therefore we recommend to place varistors separate within a box on PCB.
Furthermore a fuse should be in the varistor’s current path to avoid secondary current in case the varistor fails. This fuse can protect against secondaty currents
and therewith caused damages.
PAGE 3 OF 5
