Right Angle Panel
DIP Switches
Features
Optimized Mechanical Features
Optimized Contact System
Contact wiping action on make and break
Integral terminal and contact locked into high temperature
Electrostatic discharge shield rated to 22 KV
Materials
Series 206RA, gold plated contacts for long-term contact
corrosion resistance
UL 94V-0 plastics
Series 206RA/ 208RA
Electrical and Mechanical Specifications
Switch Function
Insulation Resistance
1,000 megohms minimum between insulated
terminals
Dielectric Strength
500 VAC for 1 minute between adjacent
switches
Nonswitching Rating
100 mA or 50 VDC maximum
Switch Capacitance
5.0 pF maximum between adjacent closed switches
Operating Temperature
–55°C to +85°C
Actuation Life
Series 206RA: 10,000 cycles switching 50 mA @ 24 VDC
Series 208RA: 2,000 cycles switching 50 mA @ 24 VDC
Allowable Solder Time
Wave soldering up to 5 seconds at 260°C
Vibration
Per MIL-STD-202F, method 204D, condition B
(.06" or 15 G's between 10 HZ to 2K HZ)
with no contact inconsistencies greater than
1 microsecond
Shock
Per MIL-STD-202F, method 213B, condition A
(50 G’s) with no contact inconsistencies
greater than 1 microsecond
Sealing
Bottom epoxy seal optional
Optional top tape seal for board spray washing
Marking
Special side or top marking available-consult CTS
SPST - 2 through 10 and 12 positions
SPDT&DPST- 1 through 6 positions
3PST - 1 through 4 positions
Series 206RA – Premium Gold Plated Contacts
Series 208RA – Economical Tin Plated Contacts
Designed for panel applications
Saves cost of right angle socket
Multiple circuit configurations available
Standard 2.54mm (.100") x 2.54mm (.100") centers, uses
minimum PCB real estate
Available with low profile, standard, or extended actuators
for SPST circuitry
RoHS compliant
Series 208RA,tin plated contacts
1 - 2 © 2017 CTS Corporation. All rights reserved. Information subject to change. 06/14/17
www.ctscorp.com
Packaging
Standard : Anti-Static tube packaging
plastic base
CTS Electrocomponents
®
Electrocomponents
Data SheetData Sheet
Right Angle Panel DIP Switch
Switch Contact Resistance
Switch Series Initial, max. End of life , max.
206RA 50 milliohms 100 milliohms
208RA 100 milliohms 500 milliohms
Optional top tape seal for board spray washing
Ordering Information
SPST Series 206RA/208RA
NUMBER OF THROWS
ACTUATOR HEIGHT
LP
– LOW PROFILE(Flush)
E
– EXTENDED(3.43mm/.135")
BLANK
– STANDARD(0.89mm/.035")
ACTUATION PRESET
BOTTOM EPOXY SEAL
12
206/208 2LP STN
1
– SINGLE THROW
2
– DOUBLE THROWS
BLANK – (FOR SPST)
**
*
Extended: SPST only
Low profile: SPST & SPDT only
*
TOP TAPE SEAL
N
– SHIP AT "ON" POSITION
BLANK
– SHIP AT "OFF"
POSITION
S - EPOXY SEAL
NUMBER OF POLES
1
– SINGLE POLE
2
– DOUBLE POLES
3
– 3 POLES
4
– 4 POLES
BLANK – (FOR SPST)
BLANK - NO EPOXY SEAL
RA
2 - 2
© 2017 CTS Corporation. All rights reserved. Information subject to change. 06/ /
www.ctscorp.com
Please find panel drawing of 206/208 RA DIP switches with SPDT,DPST,3PST circuitry from 206/208 series data sheet
Not available on extended
actuator
BLANK
– NO TOP TAPE SEAL
T
– TOP TAPE SEAL
*
*
CTS Electrocomponents
**
14
7.26 / .286
9.80 / .386
12.34 / .486
14.88 / .586
17.42 / .686
19.96 / .786
22.50 / .886
25.04 / .986
27.58 / 1.086
32.66 / 1.286
2
3
4
5
6
7
8
9
10
12
206/208- 2 RA
206/208- 3 RA
206/208- 4 RA
206/208- 5 RA
206/208- 6 RA
206/208- 7 RA
206/208- 8 RA
206/208- 9 RA
206/208-10 RA
206/208-12 RA
SPST Switches
"A" Overall
(mm/inch)
No of SW
positions SPST P/N
Dimensions
No of SW
positions
SPDT&DPST Switches
1
2
3
4
5
6
3PST Switches
No of SW
positions
1
2
3
4
206/208-121RA
206/208-122RA
206/208-123RA
206/208-124RA
206/208-125RA
206/208-126RA
206/208-211RA
206/208-212RA
206/208-213RA
206/208-214RA
206/208-215RA
206/208-216RA
206/208-311RA
206/208-312RA
206/208-313RA
206/208-314RA
Standard Part #
SPDT P/N DPST P/N 3PST P/N
NUMBER OF SWITCH POSITIONS
1
– 1 POSITION
2
– 2 POSITIONS
3
– 3 POSITIONS
4
– 4 POSITIONS
5
– 5 POSITIONS
6
– 6 POSITIONS
7
– 7 POSITIONS
8
– 8 POSITIONS
9
– 9 POSITIONS
10
– 10 POSITIONS
12
– 12 POSITIONS
17
Contact CTS for other common
features not listed.