Features
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• Dual rectifier construction, positive center tap
• Metal silicon junction, majority carr ier conduction
• Low power loss, high efficiency
• Guardring for overvoltage protection
• For use in low voltage, high frequency inver ters,
free wheeling, and polarity protection applications
Rev.Voltage 90 to 100V
Forward Current 10A
0.08
(2.032)
0.24
(6.096)
0.42
(10.66)
0.63
(17.02)
0.12
(3.05)
0.33
(8.38)
Mounting Pad
Layout
TO-263AB
Dimensions in inches
and (millimeters)
Mechanical Data
Case: JEDEC T O-220AB , IT O-220AB & T O-263AB
molded plastic body
Terminals: Plated leads, solderable per
MIL-STD-750, Method 2026
High temperature soldering guaranteed:
250°C/10 seconds, 0.25" (6.35mm) from case
Polarity: As marked
Mounting Position: Any
Mounting T orque: 10 in-lbs maximum
Weight: 0.08oz., 2.24g
0.380 (9.65)
0.411 (10.45)
0.320 (8.13)
0.360 (9.14)
0.591 (15.00)
0.624 (15.85)
12
0.245 (6.22)
MIN
K
K
0.160 (4.06)
0.190 (4.83)
0.045 (1.14)
0.055 (1.40)
0.014 (0.36)
0.021 (0.53)
0.110 (2.79)
0.140 (3.56)
0.090 (2.29)
0.110 (2.79)
0.047 (1.19)
0.055 (1.40)
PIN 1
PIN 2 K - HEATSINK
0-0.01 (0-0.254)
0.027 (0.686)
0.037 (0.940)
0.105 (2.67)
0.095 (2.41) 0.205 (5.20)
0.195 (4.95)
13
PIN
2
0.060 (1.52)
0.405 (10.27)
0.383 (9.72)
0.191 (4.85)
0.171 (4.35)
0.600 (15.5)
0.580 (14.5)
0.560 (14.22)
0.530 (13.46)
0.037 (0.94)
0.027 (0.69)
0.140 (3.56)
0.130 (3.30)
0.350 (8.89)
0.330 (8.38)
0.188 (4.77)
0.172 (4.36)
0.110 (2.80)
0.100 (2.54)
0.131 (3.39)
0.122 (3.08)
0.110 (2.80)
0.100 (2.54)
0.022 (0.55)
0.014 (0.36)
DIA.
DIA.
0.676 (17.2)
0.646 (16.4)
0.205 (5.20)
0.195 (4.95)
0.105 (2.67)
0.095 (2.41)
PIN 2
PIN 1
PIN 3
ITO-220AB (MBRF10H90CT, MBRF10H100CT)
TO-220AB (MBR10H90CT, MBR10H100CT)
TO-263AB (MBRB10H90CT, MBRB10H100CT)
123
PIN
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.145 (3.68)
0.135 (3.43)
0.350 (8.89)
0.330 (8.38)
0.560 (14.22)
0.530 (13.46)
0.022 (0.56)
0.014 (0.36)
0.110 (2.79)
0.100 (2.54)
0.603 (15.32)
0.573 (14.55)
CASE
1.148 (29.16)
1.118 (28.40)
PIN 2
0.154 (3.91)
0.148 (3.74)
0.113 (2.87)
0.103 (2.62)
0.160 (4.06)
0.140 (3.56)
0.410 (10.41)
0.390 (9.91) 0.635 (16.13)
0.625 (15.87)
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
PIN 1
PIN 3
0.028 (0.70)
0.104 (2.65)
0.096 (2.45)
0.035 (0.90)
0.205 (5.20)
0.195 (4.95)
0.105 (2.67)
0.095 (2.41)
MBR10H100CT, MBRF10H100CT & MBRB10H100CT Series
Vishay Semiconductor
New Product
Dual High-Voltage Schottky Rectifiers
Document Number 88668 www.vishay.com
24-Apr-03 1
Maximum Ratings (TC= 25°C unless otherwise noted)
Parameter Symbol
MBR10H90CT MBR10H100CT
Unit
Maximum repetitive peak reverse voltage VRRM 90 100 V
Working peak reverse voltage VRWM 90 100 V
Maximum DC blocking voltage VDC 90 100 V
Maximum average forward rectified current Total device 10
at TC= 105°CPer leg IF(AV) 5A
Peak forward surge current
8.3ms single half sine-wave superimposed IFSM 150 A
on rated load (JEDEC Method) per leg
Peak repetitive reverse current per leg at tp= 2µs, 1KHZIRRM 0.5 A
Voltage rate of change (rated VR) dv/dt 10,000 V/µs
Operating junction and storage temperature range TJ, TSTG –65 to +175 °C
RMS Isolation voltage (MBRF type only) from terminals 4500 (1)
to heatsink with t = 1 second, RH ≤30% VISOL 3500 (2) V
1500 (3)
Electrical Characteristics(TC= 25°C unless otherwise noted)
Parameter Symbol
Value
Unit
Maximum instantaneous at IF = 5.0A, TJ = 25°C 0.76
forward voltage per leg(4) at IF = 5.0A, TJ = 125°CVF0.61 V
at IF = 10A, TJ = 25°C 0.85
at IF = 10A, TJ = 125°C 0.71
Maximum reverse current per leg TJ = 25°C 3.5 µA
at working peak reverse voltage (Note 4) TJ = 100°CIR4.5 mA
Thermal Characteristics(TC= 25°C unless otherwise noted)
Parameter Symbol MBR MBRF MBRB Unit
Typical ther mal resistance per leg RθJC 2.2 4.2 2.2 OC/W
Notes:
(1) Clip mounting (on case), where lead does not overlap heatsink with 0.110”offset
(2) Clip mounting (on case), where leads do overlap heatsink
(3) Screw mounting with 4-40 screw, where washer diameter is ≤ 4.9 mm (0.19”)
(4) Pulse test: 300µs pulse width, 1% duty cycle
Ordering Information
Product Case Package Code Package Option
MBR10H90CT, MBR10100CT TO-220AB 45 Anti-Static tube, 50/tube, 2K/car ton
MBRF10H90CT, MBRF10100CT ITO-220AB 45 Anti-Static tube, 50/tube, 2K/car ton
31 13”reel, 800/reel, 4.8K/car ton
MBRB10H90CT, MBRB10100CT TO-263AB 45 Anti-Static tube, 50/tube, 2K/car ton
81 Anti-Static 13”reel, 800/reel, 4.8K/car ton
MBR10H100CT, MBRF10H100CT & MBRB10H100CT Series
Vishay Semiconductors
former ly General Semiconductor
www.vishay.com Document Number 88668
224-Apr-03
Ratings and
Characteristic Curves(TA= 25°C unless otherwise noted)
1
0.1
10
100
1000
10000
0.01
0.01 110
10
100
0.1 0.1
1
IR -- Instantaneous
Reverse Current (µA)
Junction Capacitance (pF)
1 10 100
100
1000
0.1
10
Fig. 5 – Typical Junction Capacitance
Per Leg
Reverse Voltage (V)
200 10040 60 80
Fig. 4 – Typical Reverse
Characteristics Per Leg
Fig. 6 – Typical Transient
Thermal Impedance Per Leg
t -- Pulse Duration (sec.)
Percent of Rated Peak Reverse Voltage (%)
Transient Thermal Impedance (°C/W)
TJ = 150°C
100°C
125°C
25°C
0
1.0
2.0
3.0
4.0
5.0
6.0
0 25 50 75 100 125 150 175
Fig. 1 – Forward Derating Curve
Per Leg
Average Forward Current (A)
Case Temperature (°C)
0.1 0.3 1.1
0.5
100
10
0.1
0.01
1.0
0.7 0.9
Fig. 3 – Typical Instantaneous
Forward Characteristics Per Leg
TJ = 175°C
IF -- Instantaneous Forward Current (A)
TJ = 25°C
TJ = – 40°C
TJ = 150°C
TJ = 125°C
1 10 100
25
50
75
100
125
150
175
Number of Cycles at 60 HZ
Peak Forward Surge Current (A)
Fig. 2 – Maximum Non-Repetitive
Peak Forward Surge Current Per Leg
TJ = 100°C
TJ = TJ max.
8.3ms Single Half Sine-Wave
(JEDEC Method)
MBR10H100CT, MBRF10H100CT & MBRB10H100CT Series
Vishay Semiconductors
former ly General Semiconductor
Document Number 88668 www.vishay.com
24-Apr-03 3
