GU 2 Form A (AQW21P)
1
ds_x615_en_aqw21: 140509J
TYPES
*Indicate the peak AC and DC values.
Note: The surface mount terminal shape indicator “A” and the packing style indicator “X” or “Z” are not marked on the relay.
RATING
1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)
Comp act DIP8-pin type of
60V to 600V load voltage GU 2 Form A
(AQW21P)
Output rating *
Package
Part No. Packing quantity
Through hole
terminal Surface-mount te rminal
Load
voltage Load
current Tube packing style Tape and reel packing style T ube Tape and reel
Picked from the
1/2/3/4-pin side Picked from the
5/6/7/8-pin side
AC/DC
dual use
60V 500 mA
DIP8-pin
AQW212 AQW212A AQW212AX AQW212AZ
1 tube contains:
40 pcs.
1 batch contains:
400 pcs.
1,000 pcs.
100 V 300 mA AQW215 AQW215A AQW215AX AQW215AZ
200 V 160 mA AQW217 AQW217A AQW217AX AQW217AZ
350 V 120 mA AQW210 AQW210A AQW210AX AQW210AZ
400 V 100 mA AQW214 AQW214A AQW214AX AQW214AZ
600 V 40 mA AQW216 AQW216A AQW216AX AQW216AZ
Item Symbol AQW212(A) AQW215(A) AQW217(A) AQW210(A) AQW214(A) AQW216(A) Remarks
Input
LED forward current IF50 mA
LED reverse voltage VR5 V
Peak forward current IFP 1 A f = 100 Hz,
Duty factor = 0.1%
Power dissipation Pin 75 mW
Output
Load voltage (peak AC) VL60 V 100 V 200 V 350 V 400 V 600 V
Continuous load
current IL0.50 A
(0.60A) 0.30 A
(0.35 A) 0.16 A
(0.2 A) 0.12 A
(0.14 A) 0.10 A
(0.13 A) 0.04 A
(0.05 A) Peak AC, DC
( ): in case of using only 1 channel
Peak load current Ipeak 1.0 A 0.9 A 0.48 A 0.36 A 0.3 A 0.12 A A connection: 100 ms (1 shot),
VL = DC
Power dissipation Pout 800 mW
Total power dissipation PT850 mW
I/O isolation voltage Viso 1,500 V AC Between input and output/between
contact set s
Temperature
limits Operating Topr –40°C to +85°C –40°F to +185°FNon-condensing at low
temperatures
Storage Tstg –40°C to +100°C –40°F to +212°F
mm inch
FEATURES
1. Compact 8-pin DIP size
The device comes in a compact (W) 6.4 ×
(L) 9.78 ×(H) 3.9 mm (W) .252×(L)
.385×(H) .154 inch, 8-pin DIP size
(through hole terminal type).
2. Applicable for 2 Form A use as well
as two independe nt 1 Fo rm A use
3. Controls low-level an alog signals
PhotoMOS relays feature extremely low
closed-circuit offset voltage to enable
control of low-level analog signals without
distortion.
4. High sensitivity and high speed
response
Can control max. 0.6 A load current with
5 mA input current. Fast operation speed
of typ. 0.65 ms (AQW212).
5. Low-level off state leakage current
of max. 1 μA
6. Wide variation of load voltage 60V
to 600V
TYPICAL APPLICATIONS
• High-speed inspection machin es
• Telephones equipment
• Computer
6.4
9.78
3.9
9.78 6.4
3.6
.252
.385
.154
.385 .252
.14
2
1
2
3
4
8
7
6
5
GU 2 Form A (AQW21P)
2ds_x615_en_aqw21 : 140509J
2. Electrical characteristics (Ambie nt temperature: 25°C 77°F)
*Turn on/Turn off time
RECOMMENDED OPERATING CONDITIONS
Please obey the following conditi ons to ensure proper relay operation and resetting.
Q Dimensions
Q Schematic and Wiring Diagrams
Q Cautions for Use
■ Th ese products are not designed for automotive use.
If you are considering to use these products for automotive applications, please contact your local Panasonic Electric
Works technical representative.
Please refer to our information on PhotoMOS Relays for Automotive Applications.
REFERENCE DATA
Item Symbol AQW212(A) AQW215(A) AQW217(A) AQW210(A) AQW214(A) AQW216(A) Condition
Input
LED operate
current Typical IFon 0.9 mA IL = Max.
Maximum 3 mA
LED turn off
current Minimum IFoff 0.4 mA IL = Max.
Typical 0.8 mA
LED dropout
voltage Typical VF1.25 V (1.14 V at IF = 5 mA) IF = 50 mA
Maximum 1.5 V
Output On resistance Typical Ron 0.83 Ω2.3 Ω11 Ω23 Ω30 Ω70 ΩIF = 5 mA
IL = Max.
Within 1 son time
Maximum 2.5 Ω4.0 Ω15 Ω35 Ω50 Ω120 Ω
Off st ate leakage
current Maximum ILeak 1 μAIF = 0 mA
VL = Max.
Transfer
characteristics
T urn on time* Typical Ton 0.65 ms 0.60 ms 0.25 ms 0.25 ms 0.31 ms 0.28 ms IF = 5 mA
IL = Max.
Maximum 2 ms 2 ms 1.0 ms 0.5 ms 0.5 ms 0. 5 ms
Turn off time* Typical Toff 0.08 ms 0.06 ms 0.05 ms 0.05 ms 0.05 ms 0.04 ms IF = 5 mA
IL = Max.
Maximum 0.2 ms
I/O capacitance Typical Ciso 0.8 pF f = 1 MHz
VB = 0 V
Maximum 1.5 pF
Initial I/C isolation
resistance Minimum Riso 1,000 MΩ500 V DC
Item Symbol Recommended value Unit
Input LED current IF5mA
Ton
Input
O
utput 10
%
90
%
Toff
1. Load current vs. ambient temperature
characteristics
Allowable ambient temperature: –40°C to +85°C
–40°F to +185°F
2.-(1) On resistance vs. ambient temperature
characteristics
Measured portion: between terminals 5 and 6, 7 and 8;
LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC )
2.-(2) On resistance vs. ambient temperature
characteristics
Measured portion: between terminals 5 and 6, 7 and 8;
LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
Load current, mA
0
200
300
600
500
400
0204060
8085
10
0
–40 –20
100
Ambient temperature, °C
AQW212
AQW215
AQW217
AQW210
AQW216
AQW214
0
1
2
3
4
–40
5
0–20 20 40 60 8085
AQW21
2
AQW21
5
On resistance, Ω
Ambient temperature, °C
0
20
40
60
80
–40
120
0–20 20 40 60 8085
AQW216
100
AQW21
0
AQW217
AQW214
On resistance, Ω
Ambient temperature, °C
GU 2 Form A (AQW21P)
3
ds_x615_en_aqw21: 140509J
3. Turn on time vs. ambient temperature
characteristics
LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
4. Turn off time vs. ambient temperature
characteristics
LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC )
5. LED operate current vs. ambient
temperature characteristics
Sample: All types; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
0
1.0
1.5
–40
2.0
0–20 20 40 60 8085
0.5
AQW212,AQW215
AQW216,AQW210,AQW21
7
AQW21
4
Turn on time, ms
Ambient temperature, °C
0
0.1
0.2
0.3
0.4
–40 0–20 20 40 60 808
5
AQW212,215
AQW214
AQW216,210,217
Turn off time, ms
Ambient temperature, °C
0
1
2
3
4
–40
5
0–20 20 40 60 808
5
LED operate ourrent, mA
Ambient temperature, °C
6. LED turn off current vs. ambient temperature
characteristics
Sample: All types; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
7. LED dropout voltage vs. ambient
temperature characteristics
Sample: All types;
LED current: 5 to 50 mA
8.-(1) Current vs. voltage characteristics of
output at MOS portion
Measured portion: between terminals 5 and 6, 7 and 8;
Ambient temperature: 25°C 77°F
0
1
2
3
4
–40
5
0–20 20 40 60 808
5
LED turn off current, mA
Ambient temperature, °C
0
1.0
1.1
1.2
1.3
–40 0–20 20 40 60 8085
1.4
5mA
1.5
LED dropout voltage, V
Ambient temperature, °C
50m
A
30m
A
20m
A
10m
A
1
.0
0.60.20
–
1.0 –0.6 –0.2
–0.5
–0.4
–0.1
0.5
0.4
0.1
0.2
0.3
–0.2
–0.3
–0.4–0.8
0.4 0.8
AQW212
AQW21
5
Current, A
Voltage, V
8.-(2) Current vs. voltage characteristics of
output at MOS portion
Measured portion: between terminals 5 and 6, 7 and 8;
Ambient temperature : 25°C 77°F
9. Off state leakage current vs. load voltage
characteristics
Measured portion: between terminals 5 and 6, 7 and 8;
Ambient temperature: 25°C 77°F
10. Turn on time vs. LED forward current
characteristics
Measured portion: between terminals 5 and 6, 7 and 8;
Load voltage: Max. (DC); Contin uous load current:
Max. (DC); Ambient temperature: 25°C 77°F
5
31
–
5–3–1
–200
–160
–40
200
160
40
80
120
–80
–120
–2–4 24
AQW217
AQW216
AQW214
Current, mA
Voltage, V
AQW210
060 10
0
10–3
10–6
10–9
10–12
20 40 80
AQW216
AQW214
Off state leakage current, A
Load voltage, V
0
0.2
0.4
0.6
0.8
1.2
1.0
10 20 30 40 50
AQW210,AQW216,AQW217
AQW212,AQW215
AQW214
Turn on time, ms
LED forward current, mA
11. Turn off time vs. LED forward current
characteristics
Measured portion: between terminals 5 and 6, 7 and 8;
Load voltage: Max. (DC); Continuous load current:
Max. (DC); Ambient temperature: 25°C 77°F
12. Output capacitance vs. applied voltage
characteristics
Measured portion: between terminals 5 and 6, 7 and 8;
Frequency: 1 MHz;
Ambient temperature: 25°C 77°F
0
0.02
0.04
0.08
0.06
100203040
0.12
50
0.10 AQW212
AQW215
AQW216
AQW210,217
AQW214
Turn off time, ms
LED forward current, mA
0
50
100
200
10 20 30 40 5
0
150
0
AQW21
2
AQW215
AQW217AQW214
AQW216,AQW210
Output capacitance, pF
Applied voltage, V
