MB1S - MB8S — Bridge Rectifiers
© 2009 Fairchild Semiconductor Corporation www.fairchildsemi.com
MB1S - MB8S Rev. D1 1
May 2009
MB1S - MB8S
Bridge Rectifiers
Features
Low leakage
Surge overload rating : 35 amperes peak.
Ideal for printed circuit board.
UL certified, UL #E111753 and E326243.
Absolute Maximum Ratings * TA = 25°C unless otherwise noted
* These ratings are limiting values above which the serviceability of any semiconductor device may by impaired.
Thermal Characteristics
* Device mounted on PCB with 0.5-0.5" (13x13 mm) lead length.
Electrical Characteristics TA = 25°C unless otherwise noted
Symbol Parameter Value Units
1S 2S 4S 6S 8S
VRRM Maximum Repetitive Reverse Voltage 100 200 400 600 800 V
VRMS Maximum RMS Bridge Input Voltage 70 140 280 420 560 V
VRDC Reverse Voltage (Rated VR) 100 200 400 600 800 V
IF(AV) Average Rectified Forward Current @ TA = 50°C 0.5 A
IFSM Non-Repetitive Peak Forward Surge Current
8.3 ms Single Half-Sine-Wave 35 A
TSTG Storage Temperature Range -55 to +150 °C
TJOperating Junction Temperature -55 to +150 °C
Symbol Parameter Value Units
PDPower Dissipation 1.4 W
RθJA Thermal Resistance, Junction to Ambient,* per leg 85 °C/W
RθJL Thermal Resistance, Junction to Lead,* per leg 20 °C/W
Symbol Parameter Value Units
VFForward Voltage, per bridge @ 0.5 A 1.0 V
IRReverse Current, per leg @ Rated VR TA = 25°C
TA = 125°C
5.0
0.5
µA
mA
I2t rating for fusing t < 8.3 ms 5.0 A2s
CTTotal Capacitance, per leg VR = 4.0V, f = 1.0MHz 13 pF
SOIC-4
Polarity symbols molded
or marking on body
MB1S - MB8S — Bridge Rectifiers
© 2009 Fairchild Semiconductor Corporation www.fairchildsemi.com
MB1S - MB8S Rev. D1 2
Typical Performance Characteristics
Figure 1. Forward Current Derating Curve Figure 2. Forward Voltage Characteristics
Figure 3. Non-Repetitive Surge Current Figure 4. Reverse Current vs Reverse Voltage
© 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
Auto-SPM¥Build it Now¥CorePLUS¥CorePOWER¥CROSSVOLT¥CTL™
Current Transfer Logic™
EcoSPARK®
EfficentMax
EZSWITCH™*
™*
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series™
FACT®
FAST®
FastvCore¥FETBench¥FlashWriter®*
FPS¥F-PFS¥FRFET®
Global Power ResourceSM
Green FPS¥Green FPS¥ e-Series¥Gmax
GTO¥IntelliMAX¥ISOPLANAR¥MegaBuck™
MICROCOUPLER¥MicroFET¥MicroPak¥MillerDrive™
MotionMax™
Motion-SPM
OPTOLOGIC®
OPTOPLANAR®
®
PDP SPM™
Power-SPM¥PowerTrench®
PowerXS
Programmable Active Droop¥QFET®
QS¥Quiet Series¥RapidConfigure¥
Saving our world, 1mW/W/kW at a time™
SmartMax™
SMART START¥SPM®
STEALTH™
SuperFET¥SuperSOT¥-3
SuperSOT¥-6
SuperSOT¥-8
SupreMOS™
SyncFET™
Sync-Lock™
®*
The Power Franchise®
TinyBoost¥TinyBuck¥TinyLogic®
TINYOPTO¥TinyPower¥TinyPWM¥TinyWire¥TriFault Detect¥TRUECURRENT¥*
PSerDes¥UHC®
Ultra FRFET¥UniFET¥VCX¥VisualMax¥XS™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR
CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts.
Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications,
and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of
counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are
listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have
full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information.
Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide
any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in
any manner without notice.
Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes
at any time without notice to improve the design.
Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I40