* Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise.
IDEA, Inc., 1300-B Pioneer St., Brea, CA 92821 Ph:562-697-4332, 800-LED-IDEA; Fax: 562-690-1352 Catalog 995A
A-1
T-1, (3-mm) Round, Quad PCB Mount
LED Indicator, J245B Series
J245B is designed to e xtend the reach of the LED indicators into the front bez el area where the PCB edge remains a distance away and
can be CMOS driven to sa v e components. The four lamps are positioned on a 0.3" pitch. The foot print of the pin-out is the same as the
J244B but the lamps are centered 0.25" above the mounting plane and the lamps are significantly more forward.
Specify part desired as follows:
J245B/Order Code LED1 + Order Code LED 2 + Order Code LED 3 + Order Code LED 4
For example: “J245B/I+Y+2G” designates an assembly with a red LED, a yellow LED and 2 green LED's from left to right.
ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT)
LED Lamp Typical Characteristics Recom.
Op. If
(mA)
Epoxy & Type Color Order Code Peak Vf
(V)
Iv
(mcd) 2
Θ
1/2
λ
(nm) @If=20mA @If=10mA (Deg)
TInted Diffused Red I 639 1.8 4.0 50 2 - 10
Green G 575 1.7 2.5 60 2 - 10
Yellow Y 591 1.85 4.0 45 2 - 10
(typ for bi-color)
Green
Anode
Red or
yellow
Anode
+ –
(Pinout for single color)
19.1(.75)
20.3(.80)
3.5(.13 )
2.5(.10)
7.62(.30)
15.24(.60 )
Anode
Typ
8.6(.34)
27.6(1.09)
Ø1.0(0.04)
2 pls
6.4(.25)
