HM CONNECTOR 2.5mm pitch/Wire-to-wire connectors - Matable with HR receptacles Specifications ------------------- HM connector * Current rating: Insulation displacement HR connector Crimp style HR connector * Both crimp style and insulation displacement receptacles can be used * Housing-to-terminal locks * Mountable on a variety of panels * Highly reliable housing construction Crimp style HR connectors type 3A AC, DC max. Insulation displacement HR connectors type 2A AC, DC max. * Voltage rating: 250V AC, DC max. (See Note below.) * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/10m max. After environmental testing/20m max. * Insulation resistance: 500M min. * Withstanding voltage: 1,000V AC/minute * Applicable wire: AWG #26 to #22 0.13 to 0.33mm2 * Applicable panel thickness: 0.8 to 1.6mm Note: Contacts are exposed at the housing lances. Care should be taken so that these parts do not touch the metal section of the chasis. * In using the products, refer to "Handling Precaution for Terminal and Connector" described on our website (Technical documents of Product information page). * Contact JST for details. * RoHS2 compliance. Standards----------------------- 0 Recognized E60389 6.8 Panel layout and Assembly layout 20.0 A 6.3 0.2 0 5.5 0.2 0 B Housing 2 HMR-02V 13.3 3.9 3 HMR-03V 15.8 6.4 4 HMR-04V 18.3 8.9 8 HMR-08V 28.3 18.9 12 HMR-12V 38.3 28.9 Note: 1. Punch holes in the panel according to the sketch and table shown above. Burrs must be removed. 2. The strength of the panel must be considered when punching two or more holes. 3. The connector must be inserted from the same side as the hole is punched. 1 Panel hole dimensions (mm) Applicable General tolerance panel thickness (mm) A 0.2 B 0.2 0 0 Circuits 0.81.6 HM CONNECTOR Plug / HM connector Contact Housing 12.85 6.8 5.85 20.0 4.0 A 2.5 B 0.64 1.9 11.0 2.85 1.6 1.5 2.1 0.65 1.3 Applicable wire Model No. Qty / reel 2622 1.31.7 9,000 Dimensions (mm) Qty / bag Model No. 2 HMR-02V 2.5 9.3 1,000 3 HMR-03V 5.0 11.8 500 Material and Finish 4 HMR-04V 7.5 14.3 500 Brass, tin-plated (reflow treatment) 8 HMR-08V 17.5 24.3 500 12 HMR-12V 27.5 34.3 500 mm SMR-001T-0.6 AWG # Insulation O.D. (mm) Circuits 2 0.130.33 RoHS2 compliance A B Material Contact SMR-001T-0.6 Applicator Crimping machine Crimp applicator AP-K2N PA 66, UL94V-0 Crimp applicator with dies Dies MKS-L MK/SHR/MR-001-06 APLMK SHR/MR001-06 *MKS-SC SC/SHR/MR-001-06 APLSC SHR/MR001-06 RoHS2 compliance Note: *Strip-crimp applicator Receptacle / Crimp style HR connector Housing B A 2.5 1.9 2.5 Contact 8.2 2.85 4.85 2.1 1.3 10.3 Applicable wire mm2 AWG # Insulation O.D. (mm) Qty / reel 0.130.33 2622 1.31.7 9,000 4.1 Dimensions (mm) Qty / bag Circuits Model No. 2 HRP-02-S 2.5 7.5 2,000 3 HRP-03-S 5.0 10.0 2,000 Material and Finish 4 HRP-04-S 7.5 12.5 1,000 Phosphor bronze, tin-plated (reflow treatment) 8 HRP-08-S 17.5 22.5 500 12 HRP-12-S 27.5 32.5 500 Model No. SHR-001T-P0.6 A B RoHS2 compliance Material Contact Crimping machine Crimp applicator SHR-001T-P0.6 AP-K2N Applicator Dies PA 66, UL94V-0 Crimp applicator with dies MKS-L MK/SHR/MR-001-06 APLMK SHR/MR001-06 *MKS-SC SC/SHR/MR-001-06 APLSC SHR/MR001-06 RoHS2 compliance Note: *Strip-crimp applicator 2 HM CONNECTOR Receptacle / Insulation displacement HR connector Circuits 10.3 4.1 Model No. Dimensions (mm) Qty / bag A B # 28 # 26 # 24 2 02HR-8M-P-N 02HR-6S-P-N 02HR-4K-P-N 2.5 7.5 1,000 3 03HR-8M-P-N 03HR-6S-P-N 03HR-4K-P-N 5.0 10.0 1,000 4 04HR-8M-P-N 04HR-6S-P-N 04HR-4K-P-N 7.5 12.5 1,000 8 08HR-8M-P-N 08HR-6S-P-N 08HR-4K-P-N 17.5 22.5 500 12 12HR-8M-P-N 12HR-6S-P-N 12HR-4K-P-N 27.5 32.5 500 Material and Finish Contact: Phosphor bronze, tin-plated (reflow treatment) Housing: PA 66, UL94V-0 3.6 2.5 A B 3 2.5 RoHS2 compliance