High Density Mounting Type Photocoupler LTV-816 Series Features Package Dimensions PHOTOCOUPLER Current transfer ratio (CTR : MIN. 50% at IF= 5mA, VCE=5V) High input-output isolation voltage: (VISO : 5,000Vrms) Compact dual-in-line package LTV-816 : 1-channel type LTV-826 : 2-channel type LTV-846 : 4-channel type UL approved (No. E113898) CSA approved (No. CA91533-1) FIMKO approved (No. 202944) NEMKO approved (No. P98101732) DEMKO approved (No. 307926) SEMKO approved (No. 9833163/01-03) VDE approved (No. 094722) Options available : -Leads with 0.4"(10.16mm)spacing (M Type) -Leads bends for surface mounting(S Type) -Tape and Reel of Type I for SMD(Add"-TA"Suffix) -Tape and Reel of Type II for SMD(Add"-TA1"Suffix) -VDE 0884 approvals (Add"-V"Suffix) Applications 1. Programmable controllers, computers. 2. System appliances, measuring instruments. 3. Signal transmission between circuits of different potentials and impedances. 12-105 Ltv816.p65 Page 105 2000/7/11, UE 12:28 Adobe PageMaker 6.5C/Win Note: 1.Year date code. 2. 2-digit work week. 3. Factory code shall be marked (Z : Taiwan, Y : Thailand). 4.Rank shall be or shall not be marked. 5. All dimensions are in millimeters (inches). 6. Tolerance is 0.25mm (.010 ) unless otherwise noted. 7. Specifications are subject to change without notice. Ordering Information Part Number Package LTV-816 LTV-816M LTV-816S LTV-816S-TA LTV-816S-TA1 LTV-826 LTV-826M LTV-826S LTV-826S-TA LTV-826S-TA1 LTV-846 LTV-846M LTV-846S 4-pin DIP 4-pin (leads with 0.4" spacing) 4-pin (lead bends for surface mount) 4-pin (tape and reel packaging of type 4-pin (tape and reel packaging of type 8-pin DIP 8-pin (leads with 0.4" spacing) 8-pin (lead bends for surface mount) 8-pin (tape and reel packaging of type 8-pin (tape and reel packaging of type 16-pin DIP 16-pin (leads with 0.4" spacing) 16-pin (lead bends for surface mount) LTV816-V LTV816M-V LTV816S-V LTV816STA-V LTV816STA1-V LTV826-V LTV826M-V LTV826S-V LTV826STA-V LTV826STA1-V LTV846-V LTV846M-V LTV846S-V 4-pin DIP 4-pin (leads with 0.4" spacing) 4-pin (lead bends for surface mount) 4-pin (tape and reel packaging of type 4-pin (tape and reel packaging of type 8-pin DIP 8-pin (leads with 0.4" spacing) 8-pin (lead bends for surface mount) 8-pin (tape and reel packaging of type 8-pin (tape and reel packaging of type 16-pin DIP 16-pin (leads with 0.4" spacing) 16-pin (lead bends for surface mount) Safety Standard Approval I) II) UL approved TUV approved CSA approved FIMKO approved NEMKO approved SEMKO approved DEMKO approved Application part number LTV-816 LTV-826 I) II) LTV-846 VDE approved LTV-816 I) II) LTV-826 I) II) LTV-846 12-106 Ltv816.p65 Page 106 2000/7/11, UE 12:28 Adobe PageMaker 6.5C/Win Absolute Maximum Ratings (Ta=25 ) Parameter Input Output Symbol Rating Unit Forward Current IF 50 mA Reverse Voltage VR 6 V Power Dissipation P 70 mW Collector-Emitter Voltage V CEO 80 V Emitter-Collector Voltage V ECO 6 V IC 50 mA mW Collector Current PC 150 P tot 200 mW V iso 5,000 V rms Collector Power Dissipation Total Power Dissipation *1.Isolation Voltage Operating Temperature Topr -30~+100 Storage Temperature Tstg -55~+125 *2.Soldering Temperature Tsol 260 *1. AC for 1 minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1)Short between anode and cathode on the primary side and between collector, emitter and base on the secondary side. (2)The isolation voltage tester with zero-cross circuit shall be used. (3)The waveform of applied volttage shall be a sine wave. *2. For 10 seconds. Electrical/Optical Characteristics Symbol Reverse Current IR Terminal Capacitance Ct Collector Dark Current Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector Current *Current Transfer Ratio Collector-emitter Saturation Voltage Isolation Resistance Min. Typ. Max. Unit 1.2 1.4 V 10 A 30 250 pF V=0, f=1KHz 100 VF Conditions I F=20mA V R =4V nA V CE =20V 80 V I C=0.1mA BV ECO 6 V I E=10 IC 2.5 30 mA CTR 50 600 % 0.2 V 1 pF I CEO BV CEO 0.1 V CE(sat) R ISO 5 10 10 10 11 A I F=5mA V CE =5V I F=20mA, I C=1mA DC500V, 40~60% R.H. Floating Capacitance Cf 0.6 Cut-off Frequency fc 80 Response Time (Rise) tr 4 18 s V=0, f=1MHz V CE =5V, I C =2mA R L=100 , -3dB V CE =2V, I C =2mA Response Time (Fall) tf 3 18 s R L=100 IC *CTR= IF KHz PHOTOCOUPLER Transfer Characteristics Output Input Parameter Forward Voltage (Ta=25 ) 100% Supplement Rank Table of Current Transfer Ratio CTR Model No. Rank Mark CTR(%) LTV-816 L 50~100 LTV-816 A 80~160 LTV-816 B 130~260 LTV-816 C 200~400 LTV-816 D 300~600 LTV-816 L or A or B or C or D Conditions 50~600 I F=5mA V CE =5V Ta=25 12-107 Typical Electrical/Optical Characteristic Curves (25 Ambient Temperature Unless Otherwise Noted) 12-108 Ltv816.p65 Page 108 2000/7/11, UE 12:29 Adobe PageMaker 6.5C/Win 12-109 PHOTOCOUPLER