MCH-068TAL-01D-TR30 - 3M

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ PC Card Header

Single Slot, Integrated Ejector MCH Series

Physical

Electrical

Environmental

Insulation Material: LCP

Insulation Flammability: UL 94V-0

Insulation Color: Black

Contact Material: Copper Alloy

Plating Wiping Area: Gold flash over 27 μ″ [ 0.68 μm ] PdNi

Plating Solder Tails: 100 μ″ [ 2.54 μm ] Tin/Lead or Reflowed Tin (See Ordering Information)

Mechanical:

Durability-Office Environment: 10,000 cycles minimum

Insertion Force: 8.8 lbs. ( 39.2 N ) maximum

Extraction Force: 1.5 lbs. ( 6.67 N ) minimum and 8.8 lbs. ( 39.2 N ) maximum

Current Rating: 0.5 A

Insulation Resistance: > 5 × 109Ω at 500 VDC

Withstanding Voltage: 500 VRMS for 1 Minute

Temperature Rating:

Operating Environment: -20°C to +60°C, 95% RH Non-condensing

Process Temperature: 260°C (per J-STD-020C)

TS-1109-C

Sheet 1 of 3

• Meets PCMCIA specifications

• Tapered header pins provide easy insertion

• High temperature plastic insulator

• Left or right ejector option

• Stand-off height options

• Solder retention clips option for secure

hold-down

• ESD Clips available

• See Regulatory Information Appendix (RIA)

for chemical compliance information

Date Modified: August 8, 2008

UL File No.: E68080

DISCONTINUED

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ PC Card Header

Single Slot, Integrated Ejector MCH Series

OF CARD

.137 ±.004

3.48 ±0.10

DETECT PINS

.167 ±.004

4.24 ±0.10

GENERAL USE PINS

.1 97 ± .0 0 4

5.00 ±0.10

POW ER PINS

.1 7 0

4.32 TYP

2.018

51.26

2.350

59.69

.064

1.62

.3 1 0

7.87

.4 8 2

12.24

.1 5 0

3.82

1.575

40.01

3.574

90.78

2.020

51.30

1.274

32.36 1.274

32.36

.3 9 0

9.91

.136

3.46

2.992

75.99

.504

12.81

C A R D IN

.277

7.03

CARD OUT

.9 50

24.13

.5 68

14.43

HARDW ARE REF

"A" T Y P

2 PLA CE S

.055

1.40

.165

4.19

P IN 1

PIN 36

PIN 17

PIN 68

PIN 51

PIN 34

PIN 67

PIN 35

.050

1.27

HARDW ARE REF

"A" TY P

2 PLACES

.050

1.27 TYP

45° ± 5°

1.650

41.91 2.139

54.33

.138

3.51

SOLDER RETENT

(O P T IO N A L )

Plating Suffix:

TR30 = PdNi w/ Au Flash and Sn-Pb Solder Tails

(RIA E3 & C2 apply)

LL = PdNi w/ Au Flash and Sn Solder Tails

(RIA E1 & C1 apply)

Left Ejector Option

TS-1109-B

Sheet 2 of 3

Ordering Information MCH - 068TAX - XX X X-XX

ESD/Solder Retention Clips

A = No ESD, No Solder Retention Clips

B = No ESD, Solder Retention Clips

C = ESD, No Solder Retention Clips

D = ESD, Solder Retention Clips

Ejector Option

L = Left Ejector, Standard Button

R = Right Ejector, Standard Button

Keying

Blank = 5.0 volt

3 = 3.3 volt

Insulator Body Style

01 = No Standoff

03 = 7.0 mm Standoff

05 = 2.5 mm Standoff

06 = 5.5 mm Standoff

DISCONTINUED

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ PC Card Header

Single Slot, Integrated Ejector MCH Series

STANDOFF FOOTPRINT

NO COMPONENTS

PIN 35

PIN 1

PIN 2 PIN 17

PIN 68

PIN 67

INSERT CARD

RECOMMENDED MOUNTING HOLE LAYOUT

PIN 33

PIN 34

.050

1.27 TYP.

.225

5.72

TYP

.316

8.03

.039 ±.002

0.99 ±0.05 TYP

PLATED THRU HOLE

.002 [0.05]

.589

14.96

.075

1.90

TYP

-B-

.002 [0.05]

1.650

41.91

2.018

51.26

2.350

59.69

.316

8.01

.044

1.12

.354

8.99

.307

7.81

.989

25.13

.200

5.08

.264

6.71 2.020

51.31

2.474

62.84

.413

10.49

.170

4.32

.086 ±.002

2.18 ±0.05 TYP (4X)

PLATED THRU HOLE

SECTION W-W

.158

4.01

.118 ±.010

3.00 ±0.25 TYP

.065

1.65 .140

3.56

.215

5.46 .290

7.37

STANDOFF HEIGHT

(OPTIONAL)

PC BOARD

TO CENTER LINE

TOTAL

COMPONENT HEIGHT

TS-1109-B

Sheet 3 of 3

Part Description Stand-off

Height

PC Board To

Center Line

Total

Component

Height

Dim "A" PCB

To Hardware

Seating Plane

Retent (Ref.)

MCH-068TAX01X-XX .000 [0.00] .157 [4.00] .276 [7.00] .051 [1.30] .110 [2.70]

MCH-068TAX03X-XX .276 [7.00] .433 [11.00] .551 [14.00] .345 [8.76] .074 [1.88]

MCH-068TAX05X-XX .098 [2.50] .256 [6.50] .374 [9.50] .167 [4.24] .077 [1.96]

MCH-068TAX06X-XX .217 [5.50] .374 [9.50] .492 [12.5] .286 [7.26] .068 [1.73]

MCH-068TAX07X-XX .197 [5.00] .354 [9.00] .472 [12.0] .266 [6.76] .068 [1.73]

DISCONTINUED

Regulatory Information Appendix

3M Electronic Solutions Division/Interconnect

EUROPE

Appendix E1: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product is RoHS Compliant 2005/95/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in

excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/

EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability

and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/747/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in

excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/

EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability

and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as

amended by Commission Decision 2005/618/EC.

This product contains lead in the solder tail area in excess of the maximum concentration value allowed.

Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon

information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability

and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/17/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in

excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision

2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in

writing, this information represents 3M’s best knowledge and belief based upon information provided by third party

suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability

and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

RIA-2217-A

DISCONTINUED

CHINA

Appendix C1: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits

for Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,

means that the product or part does not contain any of the following substances in excess of the following maximum

concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium,

polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise

stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by

third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability

and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits

for Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,

means that the product or part does contain a substance, as detailed in the chart below, in excess of the following

maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent

chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless

otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information

provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an

extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform

with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in

accordance with the product Warranty stated below.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the

accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended

application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s

current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in

writing, by an authorized officer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO

OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s

option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for

any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.

Name and Content of Hazardous Substances or Elements

Electronic Solutions Division

6801 River Place Blvd.

Austin, TX 78726-9000

800/225-5373

www.3M.com/interconnects RIA-2217-A

DISCONTINUED