CRCC Vishay Dale Thick Film Resistor/Capacitor Chip, Surface Mount FEATURES * Single component reduces board space and component counts * * * * * * Choice of dielectric characteristics X7R or Y5U Wrap around termination Thick film resistor/capacitor element Inner electrode protection Flow and reflow solderable Automatic placement capability, standard size STANDARD ELECTRICAL SPECIFICATIONS SIZE GLOBAL MODEL RESISTOR CHARACTERISTICS POWER TEMPERATURE RES. RATING COEFFICIENT TOL. INCH METRIC P 70 C ppm/C % W CAPACITOR CHARACTERISTICS CAP. TEMPERATURE CAP. COEFFICIENT TOL. VOLTAGE % % VDC RES. RANGE DIELECTRIC X7R 15 20 50 10 to 270 Y5U + 22, - 56 20 50 270 to 1800 CRCC1206 1206 3216 0.125 200 5 10 to 1M CRCC1206 1206 3216 0.125 200 5 10 to 1M RESISTOR * Operating temperature range: - 55 C to + 125 C * Technology: Thick film CAP. RANGE pF CAPACITOR * Operating temperature range: X7R - 55 C to + 125 C Y5U - 30 C to + 85 C * Maximum dissipation factor: 2.5 % Notes * Packaging: See appropriate catalog or web page. * Power rating depends on the maximum temperature at the solder point, the component placement density and the substrate material. TECHNICAL SPECIFICATIONS PARAMETER UNIT RESISTOR X7R CAPACITOR Rated dissipation at 70 C W 0.125 - - Capacitor voltage rating V - 50 50 VDC - 125 125 Category temperature range C - 55/+ 125 - 55/+ 125 - 30/+ 85 Insulation resistance Weight/1000 pieces g Dielectric withstanding voltage (5 s, 50 mA Charge) > 1010 > 0.65 Y5U CAPACITOR 1010 > 1010 2 5.5 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CRCC1206472J220MTF (preferred part numbering format) C GLOBAL MODEL CRCC1206 R C C 1 RESISTANCE VALUE 2 digit significant figure, followed by a multiplier 100 = 10 683 = 68 k 105 = 1.0 M 2 0 6 RES. TOLERANCE F=1% G=2% J=5% 4 7 2 J 2 CAPACITANCE VALUE (pF) 2 digit significant figure, followed by a multiplier 100 = 10 pF 271 = 270 pF 182 = 1800 pF 2 0 M T F CAP. TOLERANCE K = 10 % M = 20 % PACKAGING EA = Lead (Pb)-free, T/R (4000 pieces) TF = Tin/Lead, T/R (4000 pieces) Historical Part Number Example: CRCC1206472J220MR02 (will continue to be accepted) CRCC1206 472 J 220 M R02 MODEL RESISTANCE VALUE RES. TOLERANCE CAPACITANCE VALUE CAP. TOLERANCE PACKAGING Document Number: 31045 Revision: 03-Mar-10 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 233 CRCC Vishay Dale Thick Film Resistor/Capacitor Chip, Surface Mount DIMENSIONS SIZE DIMENSIONS in millimeters INCH METRIC 1206 3216 SIZE Rated Power in % W H T1 T2 3.2 0.15 1.6 0.15 0.55 0.15 0.5 0.25 0.5 0.25 SOLDER PAD DIMENSIONS in millimeters REFLOW SOLDERING WAVE SOLDERING INCH METRIC 1206 L 3216 a b l a b l 0.9 1.7 2.0 1.1 1.7 2.2 SCHEMATIC 120 100 80 60 40 20 0 - 55 - 25 0 25 Derating 50 75 100 125 150 175 70 Ambient Temperature in C PERFORMANCE TEST Endurance test at 70 C MIL-Std-202 method 108 CONDITIONS OF TEST TEST RESULTS (TYPICAL TEST LOTS) 1000 h at 70 C, 1.5 h "ON", 0.5 h "OFF" Dielectric withstanding voltage MIL-Std-202 method 301 125 VDC, 5 s, 50 mA charge R C (5 % + 2 ) 20 % No physical damage Thermal shock MIL-Std-202 method 107 100 cycles, - 55 C to + 125 C (5 % + 2 ) 20 % Moisture MIL-Std-202 method 106 Omit steps 7A and B (5 % + 2 ) 20 % Resistance to soldering heat EIA 575 10 s at 260 C solder bath temperature (5 % + 2 ) 20 % High temperature exposure EIA 575 125 C for 100 h (5 % + 2 ) 20 % Low temperature operation EIA 575 1 h at - 55 C then 45 min at 50 V (5 % + 2 ) 20 % Solderability and leaching EIA 575 3.12 Condition C 95 % coverage APPLICABLE SPECIFICATIONS * IPC standards * EIA 575 www.vishay.com 234 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31045 Revision: 03-Mar-10 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1