Document Number: 31045 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 03-Mar-10 233
CRCC
Vishay Dale
Thick Film Resistor/Capacitor Chip, Surface Mount
FEATURES
•Single component reduces board space and
component counts
•Choice of dielectric characteristics X7R or Y5U
•Wrap around termination
•Thick film resistor/capacitor element
•Inner electrode protection
•Flow and reflow solderable
•Automatic placement capability, standard size
Notes
•Packaging: See appropriate catalog or web page.
•Power rating depends on the maximum temperature at the solder point, the component placement density and the substrate material.
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
SIZE RESISTOR CHARACTERISTICS CAPACITOR CHARACTERISTICS
INCH METRIC
POWER
RATING
P70 °C
W
TEMPERATURE
COEFFICIENT
± ppm/°C
RES.
TOL.
± %
RES.
RANGE
Ω
DIELECTRIC
TEMPERATURE
COEFFICIENT
%
CAP.
TOL.
± %
CAP.
VOLTAGE
VDC
CAP.
RANGE
pF
CRCC1206 1206 3216 0.125 200 5 10 to 1M X7R ± 15 20 50 10 to 270
CRCC1206 1206 3216 0.125 200 5 10 to 1M Y5U + 22, - 56 20 50 270 to 1800
RESISTOR
• Operating temperature range: - 55 °C to + 125 °C
• Technology: Thick film
CAPACITOR
• Operating temperature range: X7R - 55 °C to + 125 °C
Y5U - 30 °C to + 85 °C
• Maximum dissipation factor: 2.5 %
TECHNICAL SPECIFICATIONS
PARAMETER UNIT RESISTOR X7R CAPACITOR Y5U CAPACITOR
Rated dissipation at 70 °C W 0.125 - -
Capacitor voltage rating V - 50 50
Dielectric withstanding voltage
(5 s, 50 mA Charge) VDC - 125 125
Category temperature range °C - 55/+ 125 - 55/+ 125 - 30/+ 85
Insulation resistance Ω> 1010 > 1010 > 1010
Weight/1000 pieces g 0.65 2 5.5
GLOBAL MODEL RESISTANCE VALUE RES. TOLERANCE CAPACITANCE VALUE (pF) CAP. TOLERANCE PACKAGING
CRCC1206 2 digit significant figure, F = ± 1 %2 digit significant figure, K = ± 10 %EA = Lead (Pb)-free,
T/R (4000 pieces)
followed by a multiplier G = ± 2 %followed by a multiplier M = ± 20 %
100 = 10 Ω J = ± 5 %100 = 10 pF
683 = 68 kΩ271 = 270 pF
105 = 1.0 MΩ182 = 1800 pF
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CRCC1206472J220MTF (preferred part numbering format)
CRCC1206472J220MTF
Historical Part Number Example: CRCC1206472J220MR02 (will continue to be accepted)
CRCC1206 472 J 220 M R02
MODEL RESISTANCE VALUE RES. TOLERANCE CAPACITANCE VALUE CAP. TOLERANCE PACKAGING
TF = Tin/Lead,
T/R (4000 pieces)
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31045
234 Revision: 03-Mar-10
CRCC
Vishay Dale Thick Film Resistor/Capacitor Chip, Surface Mount
DIMENSIONS
SIZE DIMENSIONS in millimeters
INCH METRIC L W H T1 T2
1206 3216 3.2 ±
0.15
1.6 ±
0.15
0.55 ±
0.15
0.5 ±
0.25
0.5 ±
0.25
SIZE SOLDER PAD DIMENSIONS in millimeters
REFLOW SOLDERING WAVE SOLDERING
INCH METRIC a b l a b l
1206 3216 0.9 1.7 2.0 1.1 1.7 2.2
Derating
- 55 - 25 0 25 50 75 100 125 150 175
120
100
80
60
40
20
0
Ambient Temperature in °C
70
Rated Power in %
SCHEMATIC
PERFORMANCE
TEST CONDITIONS OF TEST TEST RESULTS (TYPICAL TEST LOTS)
RC
Endurance test at 70 °C
MIL-Std-202 method 108 1000 h at 70 °C, 1.5 h “ON”, 0.5 h “OFF” ± (5 % + 2 Ω) ± 20 %
Dielectric withstanding voltage
MIL-Std-202 method 301 125 VDC, 5 s, 50 mA charge No physical damage
Thermal shock
MIL-Std-202 method 107 100 cycles, - 55 °C to + 125 °C ± (5 % + 2 Ω) ± 20 %
Moisture
MIL-Std-202 method 106 Omit steps 7A and B ± (5 % + 2 Ω) ± 20 %
Resistance to soldering heat
EIA 575 10 s at 260 °C solder bath temperature ± (5 % + 2 Ω) ± 20 %
High temperature exposure
EIA 575 125 °C for 100 h ± (5 % + 2 Ω) ± 20 %
Low temperature operation
EIA 575 1 h at - 55 °C then 45 min at 50 V ± (5 % + 2 Ω) ± 20 %
Solderability and leaching
EIA 575 3.12 Condition C 95 % coverage
APPLICABLE SPECIFICATIONS
• IPC standards
•EIA 575
Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1
Disclaimer
Legal Disclaimer Notice
Vishay
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
