FLUKE-123/003S - FLUKE

ScopeMeter® 190C,

190B, and 120 Series

Technical Data

ScopeMeter 190C and 190B

Series: Speed, performance

and analysis power

For demanding applications, the

ScopeMeter 190C and 190B Series

high-performance oscilloscopes

offer specifications usually found on

top-end bench instruments. With

up to 200 MHz bandwidth,

2.5 GS/s real time sampling and a

deep memory of 27,500 points per

input, they’re ideal for engineers

who need the full capabilities of a

high-performance scope in a hand-

held, battery powered instrument.

• Dual input - 200, 100 or

60 MHz bandwidth

• Up to 2.5 GS/s real time

sampling per input

• High waveform resolution of

3000 datapoints per channel

• Frequency Spectrum using FFT

analysis (190C)

• Connect-and-View™ automatic

triggering, a full range of man-

ual trigger modes plus external

triggering

• Digital Persistence for analyz-

ing complex, dynamic signals

like on an analog oscilloscope

(190C)

• Fast display update rate for

seeing dynamic behavior

instantaneously

• Automatic capture and replay of

100 screens

• 27,500 points and more per

input record length using

ScopeRecord™ mode

• 1,000 V CAT II and 600 V

CAT III safety certified

• Up to 1,000 V independently

floating isolated inputs

• Four hours rechargeable

NiMH battery pack

ScopeMeter 120 Series:

Three-in-one simplicity

The compact ScopeMeter 120 Series

is the rugged solution for industrial

troubleshooting and installation

applications. It’s a truly integrated

test tool, with oscilloscope, multi-

meter and “paperless” recorder in

one affordable, easy-to-use instru-

ment. Find fast answers to problems

in machinery, instrumentation,

control and power systems.

• A dual input 40 MHz or 20 MHz

digital oscilloscope

• Two 5,000 counts true-rms

digital multimeters

• Cursor measurements

(Fluke 124, 125)

• A dual input TrendPlot recorder

• Connect-and-View trigger

simplicity for hands-off operation

• Shielded test leads for oscillo-

scope, resistance, continuity

and capacitance measurements

• Full bandwidth, VPS40 10:1

40 MHz probe included standard

with Fluke 124, 125

•

Up to seven hours battery

operation

• 600 V CAT III safety certified

• Optically isolated RS-232

interface

• Rugged, compact case

• Bus Health test for industrial bus

systems (Fluke 125)

• Power measurements and har-

monics measurement (Fluke 125)



Now including the NEW ScopeMeter 125

2 Fluke Corporation ScopeMeter 190C/190B Series, 120 Series and the NEW ScopeMeter 125

Fluke 199C Fluke 196C

Fluke 199B Fluke 196B Fluke 192B

Bandwidth 200 MHz 100 MHz 60 MHz

Rise time 1.7 ns 3.5 ns 5.8 ns

Bandwidth limiter: User selectable: 10 kHz, 20 MHz

or off

Number of inputs: Two plus external trigger.

All inputs isolated from each other and ground.

Input coupling: AC or DC, with ground level indicator

Input sensitivity: 2 mV/div to 100 V/div (Fluke 190C

Series); 5 mV/div to 100 V/div (Fluke 190B Series)

Normal/invert: On both input channels; switched

separately

Variable attenuator: Variable gain on input channel A

Input voltage: 1000 V CAT II, 600 V CAT III rated—see

“general specifications” for further details

Vertical resolution: 8 bit

Accuracy: ± (1.5 % of reading + 0.04 x range/div)

Input impedance: 1 MW ± 1 % // 15 pF ± 2 pF

Connect-and-View™: Advanced automatic triggering

that recognizes signal patterns, automatically sets up

and continuously adjusts triggering, time base and

amplitude. Automatically displays stable waveforms

of complex and dynamic signals like motor drive and

control signals.

Video triggering: NTSC, PAL, PAL+, SECAM. Includes

field 1, field 2 and line select.

Pulse width triggering: Pulse width qualified by time.

Allows for triggering <t, >t, =t, ≠t, where t is select-

able in minimal steps of 0.01 div. or 50 nsec.

Time delay: One full screen of pre-trigger view or up

to 100 screens (= 1200 divisions) of post-trigger delay

Dual slope triggering: Both rising and falling tran-

sitions, when crossing the trigger level, initiate an

acquisition (190C only)

N-cycle triggering: Triggers on N-th occurrence of

a trigger event; N to be set in the range 2 to 99

(190C only)

Automatic capture of 100 screens

The instrument ALWAYS memorizes the last 100

screens (no user setup required). When an anomaly

occurs on screen, the REPLAY button can be pressed to

review the full screen sequence over and over.

Instrument can be set up for triggering on glitches

or intermittent anomalies and will operate in

“baby-sit” mode and will capture 100 events.

Alternatively, the 199C and 196C can be set up

in waveform compare mode to store only matching

(“Pass”) or only non-matching (“Fail”) acquired wave-

forms in the replay memory bank for further analysis.

Replay: Manual or continuous replay. Displays the

captured 100 screens as a “live” animation or under

manual control. Each screen has date- and time-stamp.

Replay storage: Up to 2 sets of 100 screens each

can be saved for later recall and analysis

FFT – Frequency Spectrum Analysis

(190C only)

Shows frequency content of oscilloscope waveform

using Fast Fourier Transform

Window: Automatic, Hamming, Hanning or None

Automatic window: Digitally re-samples acquired

waveform to get optimum frequency resolution in FFT

resultant

Vertical scale: Linear/logarithmic, in volts

Frequency axis: Logarithmic; frequency range

automatically set as function of timebase range of

oscilloscope

Waveform compare and pass/fail testing

Waveform compare: Provides storage and display

of a reference waveform for visual comparison with

newly acquired waveforms. Reference is derived from

an acquired waveform and can be modified in the

ScopeMeter or externally using FlukeView® Software.

Pass/Fail Testing (199C, 196C): In waveform com-

pare mode, the Color Scopemeter can be set up to

store only matching (“Pass”) or only non-matching

(“Fail”) acquired waveforms in the replay memory

bank for further analysis.

Automatic scope measurements

Vdc, Vac rms, Vac+dc, Vpeak max, Vpeak min, Vpeak to

peak, Aac, Adc, Aac+dc, frequency (Hz), risetime, fall-

time, power factor, Watts, VA, VA reactive, phase, pulse

width (pos/neg), dutycycle (pos/neg), temperature °C,

temperature °F, dBV, dBm into 50 W and 600 W

Vpwm ac, Vpwm ac+dc for measurement on pulse

width modulated motordrives and frequency inverters

Technical specifications 190C and 190B Series

Oscilloscope mode

Vertical deflection

Display and acquisition

Fluke 199C Fluke 196C

Fluke 199B Fluke 196B Fluke 192B

Maximum 2.5 GS/s 1 GS/s 500 MS/s

real-time

sample rate

Number of 2 2 2

digitizers

Time base 5 ns/div 10 ns/div

range to 5 s/div to 5 s/div

Horizontal

Maximum record length: 3000 points per input in

Scope mode; 27,500 points per input in ScopeRecord™

roll mode (5 ms/div to 2 min/div)

Accuracy: ± (0.01 % of reading + 1 pixel)

Glitch capture: 50 nsec (at 5 µsec/div to 1 min/div);

250 nsec (at 2 min/div)

Visible screen width: 12 divisions

Waveform mathematics: A + B, A - B, A * B, all

with user selectable scaling of resultant; A versus B

(X - Y mode); Frequency Spectrum using FFT analysis

(190C only)

Acquisition modes: Normal, auto, single shot,

ScopeRecord™ roll, glitch capture, waveform

compare, waveform compare with automatic

“Pass / Fail testing” (in 199C and 196C only)

Trigger and delay

Source: Input A, input B, external trigger input.

All input references isolated from each other and

from ground

Modes: Automatic Connect-and-View,

™ free run,

single shot, edge, delay, video, video line, selectable

pulsewidth, dual slope (190C only), N-cycle

(190C only)

Fluke 190C Fluke 190B

Display 144 mm 144 mm

Full color LCD Monochrome LCD

Display modes Input A, input B, dual, average, replay

Persistence Digital persistence: Persistence

modes short/medium/long/infinite on / off

Meter mode

Via 4 mm banana inputs. Fully isolated from scope

inputs and scope ground. The specified accuracy is

valid over the temperature range 18 °C to 28 °C

(65 °F to 82 °F). Add 10 % of specified accuracy for

each degree C below 18 °C or above 28 °C.

Maximum resolution: 5,000 counts

Voltmeter ranges: 500 mV, 5 V, 50 V, 500 V,

1,000 V

Accuracy:

Vdc ± (0.5 % + 5 counts)

Vac true rms

15 Hz to 60 Hz: ± (1 % + 10 counts)

60 Hz to 1 kHz: ± (2.5 % + 15 counts)

Vac+dc true rms

dc to 60 Hz: ± (1 % + 10 counts)

60 Hz to 1 kHz: ± (2.5 % + 15 counts)

Ohms:

Ranges: 500 W, 5 kW, 50 kW, 500 kW, 5 MW, 30 MW

Accuracy: ± (0.6 % + 5 counts)

Other meter functions

Continuity: Beeper on < 50 W (± 30 W)

Diode test: Up to 2.8 V

Amps: Adc, Aac, Aac+dc using an optional current

clamp or shunt. Scaling factors: 0.1 mV/A ... 100 V/A

Temperature (°C, °F): With optional accessories. Scale

factors 1 mV/°C or 1 mV/°F

Input impedance: 1 MW ± 1 % // 10 pF ± 2 pF

Advanced meter functions: Auto/manual ranging,

relative measurements (zero reference), TrendPlot

recording

General specifications

Memory save and recall

Scope memories: 10 memory locations that each can

contain two waveforms plus corresponding setup

Recorder memories: 2 memory locations that each

can contain 100 captured dual input scope screens,

or a dual input ScopeRecord (27,500 Min-Max pairs

per input), or a dual input Trendplot (18,000 min-max

pairs + average values)

Real-time clock

Time and date stamp for ScopeRecord, 100 captured

screens and TrendPlots

Mechanical data

Size: 256 x 169 x 64 mm (10.1 x 6.6 x 2.5 in)

Weight: 2 kg (4.4 lbs)

Case

Design: Rugged, shock proof with integrated

protective holster

Drip and dust proof: IP51 according to IEC529

Shock and vibration: Shock 30 g, vibration

(sinusoidal) 3 g according to MIL-PRF-28800F Class 2

Display size: 115.2 mm x 86.4 mm (4.54 in x 3.4 in)

Resolution: 320 x 240 pixels

Contrast and brightness: User adjustable,

temperature compensated

ScopeMeter 190C/190B Series, 120 Series and the NEW ScopeMeter 125 Fluke Corporation 3

Cursor measurements

Source: Input A, input B or the mathematical result

trace (excluding A vs B curve)

Dual horizontal lines: Voltage at cursor 1 and 2,

voltage between cursors

Dual vertical lines: Time between cursors, 1/T

between cursors (in Hz), voltage between markers,

risetime with markers, falltime with markers; Vrms

between cursors (190C only), watts between cursors

(190C only)

Single vertical line: Min-Max and Average voltage

at cursor position; frequency and rms-value of individ-

ual frequency component in FFT result (190C only)

Zoom

Up to 16x horizontal zoom

Recorder mode

ScopeRecord – roll mode

Dual input waveform storage mode

Source and display: Input A, input B, dual

Memory depth: 27,500 points per input. Each point

consists of Min-Max pair

Min-Max values: Min-Max values are measured at

high sample rates ensuring capture and display of

glitches

Time base range 5 ms/div to 1 min/div 2 min/div

Recorded timespan 6 sec to 24 hr 48 hr

Glitch capture 50 ns 250 ns

Sample rate 20 MS/s 4 MS/s

Resolution 200 µsec to 2 sec 4.8 sec

Recording modes: Single sweep, continuous roll,

Start-on-Trigger, Stop-on-Trigger

Stop-on-Trigger (through external): ScopeRecord

mode can be stopped by an individual trigger event, or

by an interruption of a repetitive trigger signal

Horizontal scale: Time from start, time of day

Zoom: Up to 100x

Memory: Up to 2 dual input ScopeRecord waveforms

can be saved for later recall and analysis

TrendPlot™ recording

Single or dual input electronic paperless chart

recorder. Plots, displays and stores meter and scope

measurements.

Source and display: Input A, input B or DMM input

Memory depth: 18,000 points recording. Per record

point a minimum, a maximum and an average value,

plus a date and timestamp are recorded.

Ranges: 5 s/div to 30 min/div in normal view mode;

5 min/div to 48 hr/div in view all mode, giving

overview of total record

Recorded timespan: Up to 22 days with a resolution

of 1 minute

Recording mode: Continuous roll for the duration of

the full recordable timespan

Measurement speed: 5 measurements per second

Horizontal scale: Time from start, time of day

Zoom: Up to 64x zoom

Memory: Up to 2 TrendPlot recordings can be saved

for later recall and analysis

Cursor measurements – all recorder modes

Source: Input A, B or DMM input

Dual vertical lines: Min-Max or Average

voltage. Time between cursors

Single vertical line: Min-Max or Average

voltage. Absolute date and time or time from start

Fluke 190C Fluke 190B

Display Bright full-color LCD Bright LCD

with backlight, with backlight

Brightness 80 Cd/m2 typ. 125 Cd/m2 typ.

using power adapter using power adapter

Power

Line power: Country-specific line voltage

adapter/battery charger included

Battery power: Rechargeable NiMH (installed)

Battery operating time: 4 hours

Battery charging time: 4 hours

Battery power saving functions: Auto power down

with adjustable power down time. On-screen battery

status indicator.

Safety

Compliance:

EN61010-1-2001, Pollution degree 2;

UL 3111-1, with approval;

CAN/CSA C22.2, No. 61010-1-04, with approval;

ANSI/ISA-82.02.01

Input voltage ratings

Maximum probe voltage: 1000 V CAT II/600 V CAT III

(Maximum voltage between 10:1 probe tip [VPS200]

and reference lead)

Floating voltage: 1000 V CAT II/600 V CAT III

(Maximum voltage between earth ground and any

terminal [signal input or shielding])

Independently isolated inputs:

1000 V CAT II/600 V CAT III

(Maximum voltage between any terminal of one input

or probe [VPS200] and any other terminal of another

input or probe [VPS200])

Maximum voltage on BNC input directly

(input A or B): 300 V CAT III

Maximum voltage on meter input:

1,000 V CAT II/600 V CAT III

Environmental

Operating temperature: 0 °C to +50 °C

Storage temperature: -20 °C to +60 °C

Standard accessories Fluke 199C, Fluke 196C, Fluke 199B,

Fluke 196B, Fluke 192B

Rechargeable battery pack (installed) BP190

Line voltage adapter/battery charger BC190

Voltage probes and accessories 10:1 voltage probe (VPS200, 1 red + 1 grey)

including hook clip, ground lead with mini alliga-

tor clip, ground lead with hook clip, 4 mm add-on

probe tip, ground lead to 4 mm banana plug

Multimeter test leads TL75 Hard Point test lead set (1red, 1 black)

User manual 10 language versions on CD-ROM, “Getting Started”

booklet included with instrument

Humidity:

10 °C to 30 °C: 95% RH non condensing

30 °C to 40 °C: 75% RH non condensing

40 °C to 50 °C: 45% RH non condensing

Maximum operating altitude: 3,000 m (10,000 feet)

Maximum storage altitude: 12 km (40,000 feet)

Electro-Magnetic-Compatibility (EMC): EN 61326-1

for emission and immunity

Optically-isolated PC/printer interface

PC communication: Transfer instrument settings,

screen images, waveform data and waveform

references, compatible with FlukeView® software

for Windows® via optional PM9080.

To printer: Supports HP Laserjet®, DeskJet, Epson FX/

LQ, Seiko DPU-414 and Postscript printers via optional

PAC 91

Warranty

Three-years, parts and labor on mainframe instrument

One-year on accessories

Accessories

4 Fluke Corporation ScopeMeter 190C/190B Series, 120 Series and the NEW ScopeMeter 125

Technical specifications 120 Series

Oscilloscope mode

Vertical deflection

Bandwidth and risetime Fluke 125, 124 Fluke 123

Bandwidth (risetime)

• with VPS40 probes 40 MHz 20 MHz

• input A and B directly 40 MHz 20 MHz

• with STL120 Shielded Test Leads 12.5 MHz 12.5 MHz

Instrument risetime (input directly) 8.75 ns 17.5 ns

Number of inputs: 2

Input coupling: AC, DC with ground level indicator

Input sensitivity: 5 mV to 500 V/div (with the

included VPS40 (Fluke 125, 124) and STL120 shielded

test leads measure up to 600 Vrms, CAT III)

Input voltage: 600 V CAT III. See “general specifica-

tions” for more detailed information.

Vertical resolution: 8 bit

Accuracy: ± (1 % of reading + 0.05 x range/div)

Input impedance: 1 MW ± 1 % // 225 pF with

STL120 shielded test leads; 1 MW ± 1 % // 20 pF

± 3 pF with BB120; 5 MW ± 1 % // 15.5 pF with

VPS40, 10:1 Voltage probe

Horizontal

Max. sample rate (both channels simultaneously):

Fluke 125, 124: 2.5 GS/s for repetitive signals;

25 MS/s for single shot

Fluke 123: 1.25 GS/s for repetitive signals; 25 MS/s

for single shot

Number of digitizers: 2

Time base range: 10 ns/div to 1 min/div; 20 ns/div

to 1 min/div (Fluke 123)

Maximum record length: 512 Min-Max points

per input

Accuracy: ± (0.1 % of reading + 1 pixel)

Glitch detect: 40 ns

Display and acquisition

Display modes: Input A, input A and B, envelope,

smooth

Acquisition modes: Normal (including glitch capture),

single shot, roll

Trigger and delay

Source: Input A, input B, external via optional ITP120

Modes: Automatic Connect-and-View, Free Run, Edge,

Single Shot, Video, Video Line

Harmonics mode (Fluke 125 only)

Converts waveform information into a harmonics dis-

play (using FFT processing), which shows the relative

amplitudes of the 1st up to the 33rd harmonic

Harmonics frequency range: DC to 33rd harmonic

(fundamental ≤ 60 Hz); DC to 24th (fundamental

≤ 400 Hz)

Analyzed waveform: Voltage waveform (Ch.A),

current waveform (Ch.B) or power (Ch.A x Ch.B),

automatically generated

Display: Bargraph showing 1st up to 33rd harmonic,

amplitude displayed in % relative to fundamental

Timebase setting: 5 ms/div.

Measurements: Relative amplitude of individual

harmonic; THD in %r or %f

Dual input meter

The specified accuracy is valid over the temperature

range 18 °C to 28 °C (64 °F to 82 °F). Add 10 % of

specified accuracy for each °C below 18 °C or above

28 °C (64 °F to 82 °F)

Max. meter bandwidth: 40 MHz (Fluke 125, 124),

20 MHz (Fluke 123)

Voltage measurements

Measurement selection: Vdc, Vac rms, Vac+dc rms,

Vpeak max, Vpeak min, Vpk-pk

Ranges: 500 mV, 5 V, 50 V, 500 V, 1250 V

Full scale reading: 5,000 counts

Accuracy

Vdc: ± (0.5 % + 5 counts)

Vac rms:

1 Hz to 60 Hz: ± (1 % + 10 counts)

60 Hz to 1 kHz: ± (2.5 % + 15 counts)

20 kHz to 1 MHz ± (5 % + 20 counts)

Vac+dc true-rms:

DC to 60 Hz: ± (1 % + 10 counts)

60 Hz to 1 kHz: ± (2.5 % + 15 counts)

20 kHz to 1 MHz (5 % + 20 counts)

Vpeak:

Max peak or Min peak: 5 % of full scale

Peak-to-peak: 10 % of full scale

Ohms

Ranges: 500 W, 5 kW, 50 kW, 500 kW, 5 MW, 30 MW

(all models), 50.00 W (Fluke 125 only)

Max. resolution: 5,000 counts

Accuracy: ± (0.6 % of reading + 5 counts)

Capacitance

Ranges: 50 nF to 500 µF

Max. resolution: 5,000 counts

Accuracy: ± (2 % of reading + 10 counts)

Other meter functions

Frequency: Up to 70 MHz (Fluke 125, 124) or up to

40 MHz (Fluke 123)

Rotational speed (RPM): Revolutions per minute,

based on 1, 2 or 4 or 8 pulses per 2 revolutions

(Fluke 125 only)

Max. RPM reading: 50 kRPM

Continuity: Beeper on < 30 W

Diode test: Up to 2.8 V

Amps: Amp dc, Amp ac, Amp ac+dc using an optional

current clamp or shunt. Scaling factors: 0.1 mV/Amp to

100 V/Amp

Connect-and-View: Advanced automatic triggering

that recognizes signal patterns and automatically sets

up and continuously adjusts triggering, time base and

amplitude. Automatically displays stable pictures of

complex and dynamic signals like motor drive and

control signals

Video triggering: NTSC, PAL, PAL+, SECAM. Includes

line select

Time delay: Up to 10 divisions pre-trigger view

Measurements

Vdc, Vac, Vac+dc, Vpeak max, Vpeak min, Vpeak

to peak, frequency (Hz), positive pulse width, negative

pulse width, positive duty cycle, negative duty

cycle, Amp ac, Amp dc, Amp ac+dc, Phase,

Temperature °C, Temperature °F, dBV, dBm into 50 W

and 600 W. (Amps, °C or °F with optional probes)

Cursor measurements (125, 124)

Sources: Input A, Input B

Modes: Single or dual vertical cursor, dual horizontal

cursor, risetime or falltime

Measurements:

Single vertical line: Average, min value, max value,

time from start of recording in roll mode

Dual vertical lines: ∆V at markers, time between

cursors, 1/T between cursors (in Hz)

Dual horizontal lines: High, low or ∆V – readout,

risetime and falltime: transition time, 0 %-level,

100 %-level, with markers at 10 % and 90 %

Accuracy: As oscilloscope

Bus health tester (Fluke 125 only)

Bus health automatically analyzes the electrical signals

on the network to give waveform data and measure

individual parameters. Automatic comparison of the

measurement results to the standards results in “good”

or “false” indicators to be displayed per parameter.

Bus types and reference standards used:

AS-i (EN50295, 166 kb/s)®;

CAN-bus (ISO-11898, up to 1 Mb/s);

Interbus S (EIA-485, up to 10 Mb/s)®;

ControlNet (61158 type 2, 2.5 Mb/s)®;

Modbus (EIA-232, up to 115 kb/s and

EIA-485, up to 10 Mb/s)®;

Foundation Fieldbus H1 (61158 type 1, 31.25 kb/s)

and H2 (61158 type 1, up to 10 Mb/s);

Profibus DP (EIA-485, up to 10 Mb/s) and

PA (61158 type 1, 31.25 kb/s);

Ethernet [10Base2 (coaxial) and 10BaseT

(UTP)], 10 Mb/s;

RS-232 (EIA-232, up to 115 kb/s);

RS-485 (EIA-485, up to 10 Mb/s);

or user defined system

Measured parameters: Baud rate, risetime, falltime,

high level, low level, distortion, amplitude and jitter,

with comparison to system’s standard values

Power measurements (Fluke 125 only)

Measure types: Watt, VA, VAR, Power Factor (PF)

Power configuration: Single phase or balanced

3-phase (delta-configuration) mains supply

Voltage measurement: Channel A, using STL120,

voltage probe or direct input

Current measurement: Channel B, using i400s

current clamp (included) or other compatible clamp

Current clamp sensitivity: 0.1/1/10/100/1000 mV/A,

10 mV/mA and 400 mV/A

ScopeMeter 190C/190B Series, 120 Series and the NEW ScopeMeter 125 Fluke Corporation 5

Mechanical data

Size: 50 x 115 x 232 mm (2 x 4.5 x 9.1 in)

Weight: 1.2 kg (2.64 lbs)

Safety

Compliance:

EN61010-1-2001, Pollution degree 2;

UL 3111-1;

CAN/CSA C22.2, No. 61010-1-04,

including CCSAUS-approval;

ANSI/ISA-82.02.01

Input voltage ratings

Maximum input voltage: 600 V CAT III

(Maximum voltage between input and reference lead)

Maximum input voltage using VPS40 Probe:

600 V CAT III, 1000 V CAT II (Maximum voltage

between probe tip input and reference lead)

Floating voltage: 600 V CAT III

(Maximum voltage between earth ground and any

terminal [signal input or reference lead])

Maximum voltage between reference leads:

Instrument has common grounds connected via

self recovering fault protection. For different ground

potential measurements between inputs, use DP120

differential voltage probe

Environmental

According to MIL-PRF-28800F, Class 2

Operating temperature: 0 °C to +50 °C

Storage temperature: -20 °C to +60 °C

Humidity:

10 °C to 30 °C, 95% RH non condensing;

30 °C to 40 °C, 75% RH non condensing;

40 °C to 50 °C, 45% RH non condensing

Maximum operating altitude: 2,000 m (6,500 feet);

3,000 m (10,000 feet) voltages ≤ 400 V

Maximum storage altitude: 12 km (40,000 feet)

Electro-Magnetic-Compatibility (EMC):

EN61326-1 for emissions and immunity

Optically isolated PC/printer interface

To printer: Supports HP Laserjet,® Deskjet,® Epson

FX/LQ and postscript printers via optional PAC91

To PC: Transfer instrument settings, screen images

and data, compatible with FlukeView® software for

Windows® via optional PM9080

Warranty

Three-years (parts and labor) on main instrument

One-year on accessories

Accessories

Duty cycle: 2 % to 98 %, up to 30 MHz

Temperature (°C, °F): With optional accessories. Scale

factors 1 mV/°C or 1 mV/°F

Number of inputs: 2

Input impedance: 1 MW ± 1 % // 10 pF ± 2 pF

Advanced meter functions: Auto/manual ranging,

TouchHold®, Relative measurements (zero reference),

TrendPlot recording

Recorder mode

Trendplot recording

Dual input electronic paperless chart recorder. Plots

and displays the actual, minimum, maximum and

average of any measurement.

Source and display: Input A, input A and B

Range: 15 s/div to 2 days per division (automatic)

Recorded timespan: Up to 16 days with a resolution

of 1.5 hours

Recording mode: Continuous with automatic vertical

scaling and horizontal time compression

Measurement speed: 2.5 measurements per second

maximum

Horizontal scale: Time from start

General specifications

Case

Design: Rugged, shock proof with integrated

protective holster

Drip and dust proof: IP51 according to IEC529

Shock and vibration: Shock 30 g according to

MIL-PRF-28800F, Class 2, par. 3.8.4.2 and 4.5.5.3.1

Shock and vibration: Vibration 3 g according to

MIL-PRF-28800F, Class 2, par. 3.8.5.1 and 4.5.5.4.1

Display

Bright LCD with CCFL backlight, 60 (35) cd/m2

with (without) power adapter

Size: 72 x 72 mm (2.8 x 2.8 inch)

Resolution: 240 x 240 pixels

Contrast and brightness: User adjustable,

temperature compensated

Memory save and recall

20 (10 in Fluke 123) instrument screens with user

set-ups and user text

Real-time clock

Time and date stamp TrendPlot recording

Power

Line power: Country-specific line voltage

adapter/battery charger included

Battery power: Rechargeable Ni-MH BP120MH

(installed)

Battery operating time: Up to 7 hours using

BP120MH

Battery charging time: 7 hours

Battery power saving functions: Auto power down

with adjustable power down time. On-screen battery

power indicator

International safety standards

FlukeView® ScopeMeter® Software for Windows®

6 Fluke Corporation ScopeMeter 190C/190B Series, 120 Series and the NEW ScopeMeter 125

Standard accessories Fluke 125, Fluke 124, Fluke 123

Rechargeable battery pack (installed) BP120MH

Line voltage adapter/battery charger PM8907

Voltage probes and accessories STL120 Shielded Test lead set; VPS40 high imped-

ance 10:1 probe, 40 MHz (1 black, included with

Fluke 125, 124); HC120 hook clips; ground leads

with mini alligator clips; AC120 alligator clips;

BB120 BNC-to-Shielded banana adapter

Multimeter test leads TL75 Hard Point test lead set (1 black)

Current clamp i400s Current Clamp (included with Fluke 125 only)

User manual 15 language versions on CD-ROM, “Getting Started”

booklet included with instrument

• Capture complete replay sequence into the PC for

further analysis and documentation

• English, French and German versions included on a

single CD-ROM

Note: Some functionality may be available with specific ScopeMeter

models only

System requirements

• Pentium 90 or better

• CD-ROM drive

• Windows® 95/98/Me/

NT 4.0/2000/XP

• One free RS232 port or

USB port

• PM9080 optically iso-

lated RS232 adapter/

cable, or:

• OC4USB optically iso-

lated USB interface

adapter/cable, available

separately or included

in SCC120/SCC190 kit

and in ScopeMeter “S”

versions

Supported instruments

Full support for Fluke 199C, 199B, 199, 196C, 196B,

196, 192B, 192, 125, 124, 123

Measurement

voltage

category Summary description

CAT IV Three phase at utility connection, any outdoor

conductors (under 1,000 V)

• Outside and service entrance

• Service drop from pole to building

• Run between meter and panel

• Overhead line to detached building

• Underground line to well pump

CAT III Three-phase distribution (under 1,000 V),

including single phase commercial lighting

and distribution panels

• Feeders and short branch circuits

• Distribution panel devices

• Heavy appliance outlets with “short”

connections to service entrance

CAT II Single-phase receptable connected loads

• Outlets and long branch circuits

• All outlets at more than 10 m (30 ft)

from Category III source

• All outlets at more than 20 m (60 ft)

from Category IV source

CAT I Electronic

• Electronic equipment

• Low energy equipment with transient

limiting protection

To protect your instrument and—more importantly—

yourself, choose a test tool that can withstand the

electrical hazards present in the environment in which

you plan to use it.

EN61010 establishes international safety require-

ments for electrical measurement equipment. It

separates the various electrical environments into

installation categories based on the danger from

International safety standards

high-voltage energy transients. To choose the right

tool, the voltage rating alone does not determine the

safety. It is the combination of voltage rating and

installation category that determines maximum tran-

sient withstand capability of the tool. CAT III rated

instruments are recommended for measurement on

industrial power distribution systems.

FlukeView software adds PC power to your

Fluke ScopeMeter Test Tools.

FlukeView ScopeMeter software helps you get more

out of your ScopeMeter:

• Store instrument’s screen copies on the PC, in color

(with Fluke 190C Series) or in black and white

(Fluke 190B and 120 Series)

• Copy color screen images into your reports and

documentation (color screen images with

Fluke 190C Series only)

• Capture and store waveform data from your

ScopeMeter on your PC

• Create and archive waveform references for auto-

matic (Fluke 190C Series) or visual (Fluke 190B and

190C Series) comparison

• Use cursors for parameter measurement

• Includes waveform analysis, e.g., FFT spectrum

analysis

• Copy waveform data into your spreadsheet for

detailed analysis

• Extended recording of up to four user-selected mea-

surements help you monitor and analyze slow mov-

ing signals and related events

• Logging of other readings directly into other appli-

cation programs, eg., spreadsheet

• Add user text to instrument setups and send

these to the instrument for operator reference and

instructions

FlukeView® ScopeMeter® Software for Windows®

ScopeMeter 190C/190B Series, 120 Series and the NEW ScopeMeter 125 Fluke Corporation 7

Color ScopeMeter 190C Series ScopeMeter 190B Series ScopeMeter 120 Series

Fluke 199C Fluke 196C Fluke 199B Fluke 196B Fluke 192B Fluke 125 Fluke 124 Fluke 123

Bandwidth 200 MHz 100 MHz 200 MHz 100 MHz 60 MHz 40 MHz 40 MHz 20 MHz

Max real time sample rate 2.5 GS/s 1 GS/s 2.5 GS/s 1 GS/s 500 MS/s 25 MS/s 25 MS/s 25 MS/s

Max equivalent time — — — — — 2.5 GS/s 2.5 GS/s 1.25 GS/s

sample rate

Display 14.4 cm full color LCD 14.4 cm monochrome LCD 10.2 cm monochrome LCD

Digital persistence Yes, gives analog oscilloscope like — —

waveform decay (user selectable)

Envelope mode Yes Yes Yes

Waveform compare Visual reference and automatic Visual reference —

‘Pass / Fail’ testing

Max record length

in Scope Mode: 3000 points per input channel, allowing for high time resolution signal analysis using zoom 512 min/max points per input

in ScopeRecord mode: 27,000 points per input or more (5 ms/div to 2 min/div)

Number of inputs 2 plus external/DMM input, all isolated from each other and from ground 2

Number of digitizers 2 2

Independently floating Up to 1000 V between inputs, references and ground —

isolated inputs

Input sensitivity 2 mV/div to 100 V/div 5 mV/div. to 100 V/div 5 mV/div to 500 V/div

Glitch capture

Up to 3 ns using pulse width triggering; 50 µs peak detect at 5 ms/div to 1 min/div

40 ns

Timebase range in

5 ns/div to 2 min/div 10 ns/div to 10 ns/div to 20 ns/div to

Scope mode

2 min/div 1 min/div 1 min/div

Trigger types Connect-and-View™, Free Run, Single Shot, Edge, Delay, Video Frame, Video Line Connect-and-View™, Free Run,

Selectable pulse width and external Single Shot, Edge, Video

Dual Slope trigger and —

Event trigger (n-cycle)

Scope measurements

7 cursor measurements, 30 automatic measurements As 124 + cursors + 26 26 automatic

Automatic Vrms and watts Power, VA,

automatic measurements

measurement on cursor limited — VAR, PF,

RPM, measurements

part of waveform Vpwm; THD

Bus health test function — For standard —

industry buses

Waveform mathematics A + B, A - B, A x B, A versus B (X-Y-mode, giving Lissajous diagrams) Harmonics mode —

+ Frequency Spectrum (FFT) —

Power measurements P (W), VA, VAR, PF Power, VA, VAR, —

PF, Vpwm

ScopeRecord trigger modes Start on trigger, stop on trigger, stop in absence of trigger signal —

Capture last 100 screens Automatic, with replay capability —

Dual input TrendPlot Yes, with cursors and zoom Yes, with cursors Yes

Memory for screens and 10 screens with set-up; 20 10

set-ups 5 more memories are made available upon registration of the ScopeMeter

Memory for recordings Two, each can store 100 scope screens, a ScopeRecord or a TrendPlot

True-rms multimeter 5000 counts, Volts, Amps, Ohms, Continuity, Diode, Temp Dual fully featured 5000 counts DMM

Safety certified (EN61010-1) 1000 V CAT II / 600 V CAT III (instrument and included accessories) 600 V CAT III (instrument and included accessories)

Battery (installed) 4 hr Ni-MH (BP190MH) 7 hr Ni-MH (BP120MH)

Line Power Adapter/battery-charger included (BC190) Adapter/battery-charger included (PM8907)

Size 25.6 x 16.9 x 6.4 mm (10.1 x 6.7 x 2.5 in) 23.2 x 11.5 x 5.0 mm (9.2 x 4.5 x 2 in)

Weight 2 kg (4.4 lb) 1.2 kg (2.64 lbs)

PC and Printer Interface Using optional optically insulated adapter/cable OC4USB (USB) or PM9080 (RS-232)

Warranty Three-years on main instrument, one-year on the standard accessories

Detailed technical specifications, optional accessories and a virtual product demo can be found on the Fluke web site. Check it out at: www.fluke.com/scopemeter.

Fluke-199C/S Color ScopeMeter (200 MHz / 2.5 GS/s)

with SCC190 kit

Fluke-199C Color ScopeMeter (200 MHz / 2.5 GS/s)

Fluke-196C/S Color ScopeMeter (100 MHz / 1 GS/s)

with SCC190 kit

Fluke-196C Color ScopeMeter (100 MHz / 1 GS/s)

Fluke-199B/S ScopeMeter (200 MHz / 2.5 GS/s) with

SCC190 kit

Fluke-199B ScopeMeter (200 MHz / 2.5 GS/s)

Fluke-196B/S ScopeMeter (100 MHz / 1 GS/s) with

SCC190 kit

Fluke-196B ScopeMeter (100 MHz / 1 GS/s)

Fluke-192B/S ScopeMeter (60 MHz / 500 MS/s) with

SCC190 kit

Fluke-192B ScopeMeter (60 MHz / 500 MS/s)

Fluke-125/S Industrial ScopeMeter, 40 MHz, with

SCC120 kit

Fluke-125 Industrial ScopeMeter, 40 MHz

Fluke-124/S Industrial ScopeMeter, 40 MHz, with

SCC120 kit

Fluke-124 Industrial ScopeMeter, 40 MHz

Fluke-123/S Industrial ScopeMeter, 20 MHz, with

SCC120 kit

Fluke-123 Industrial ScopeMeter, 20 MHz

BP120MH Rechargeable NiMH Battery for use with

Fluke 120 Series

BP190 Rechargeable NiMH Battery for use with

Fluke 190 Series

SW90W FlukeView ScopeMeter Software for

Windows

OC4USB Optically isolated USB adapter/cable

PM9080 Optically isolated RS232 adapter/cable

SCC190 Software - Cable - Case kit for Fluke

190 Series

SCC120 Software - Cable - Case kit for Fluke

120 Series

C195 Durable, universal soft carrying case for

ScopeMeter Test Tools and accessories

C190 Hard shell protective carrying case for

Fluke 190 Series

C125 Durable, protective soft carrying case for

Fluke 120 Series

C120 Hard shell protective carrying case for

Fluke 120 Series

DP120 Differential Voltage Probe for use with

Fluke 120 Series

VPS40 40 MHz, 10:1 Voltage probe set for use

with Fluke 120 Series

Selection guide

Ordering information

Fluke Corporation

PO Box 9090, Everett, WA USA 98206

Fluke Europe B.V.

PO Box 1186, 5602 BD

Eindhoven, The Netherlands

For more information call:

In the U.S.A. (800) 443-5853 or

Fax (425) 446-5116

In Europe/M-East/Africa +31 (0) 40 2675 200 or

Fax +31 (0) 40 2675 222

In Canada (800)-36-FLUKE or

Fax (905) 890-6866

From other countries +1 (425) 446-5500 or

Fax +1 (425) 446-5116

Web access: http://www.fluke.com

Specifications subject to change without notice.

Trademarks are the property of their respective owners.

Printed in U.S.A. 4/2007 1629083 D-EN-N Rev F

Fluke. Keeping your world

up and running.®