STB70NF3LL N-channel 30V - 0.0075 - 70A - D2PAK Low gate charge STripFETTM II Power MOSFET General features Type VDSS RDS(on) ID STB70NF3LL 30V < 0.0095 70A Optimal RDS(on) x Qg trade-off @ 4.5V Conduction losses reduced Switching losses reduced 3 1 DPAK Description This application specific Power MOSFET is the third genaration of STMicroelectronis unique "Single Feature SizeTM" strip-based process. The resulting transistor shows the best trade-off between on-resistance and gate charge. When used as high and low side in buck regulators, it gives the best performance in terms of both conduction and switching losses. This is extremely important for motherboards where fast switching and high efficiency are of paramount importance. Internal schematic diagram Applications Switching application Order codes Part number STB70NF3LLT4 July 2006 Marking Package 2 D PAK B70NF3LL@ Rev 7 Packaging Tape & reel 1/13 www.st.com 13 Contents STB70NF3LL Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Packing mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2/13 ................................................ 8 STB70NF3LL 1 Electrical ratings Electrical ratings Table 1. Absolute maximum ratings Symbol VDS VDGR Parameter Value Unit Drain-source voltage (VGS = 0) 30 V Drain-gate voltage (RGS = 20 k) 30 V 16 V VGS Gate- source voltage ID(1) Drain current (continuous) at TC = 25C 70 A ID Drain current (continuous) at TC = 100C 50 A Drain current (pulsed) 280 A Total dissipation at TC = 25C 100 W Derating factor 0.67 W/C Peak diode recovery voltage slope 5.5 V/ns Single pulse avalanche energy 500 mJ -55 to 175 C Value Unit IDM (2) PTOT (3) dv/dt EAS (4) Tstg TJ Storage temperature Operating junction temperature 1. Current limited by the package 2. Pulse width limited by safe operating area 3. ISD 70A, di/dt 350A/s, VDD V(BR)DSS, TJ TJMAX 4. Starting TJ = 25 oC, ID = 35A, VDD = 25V Table 2. Symbol Thermal data Parameter RthJC Thermal resistance junction-case Max 1.5 C/W RthJA Thermal resistance junction-ambient Max 62.5 C/W Tl Maximum lead temperature for soldering purpose 300 C 3/13 Electrical characteristics 2 STB70NF3LL Electrical characteristics (TCASE=25C unless otherwise specified) Table 3. On/off states Symbol Parameter Drain-source Breakdown voltage ID = 250 A, VGS = 0 IDSS Zero gate voltage Drain current (VGS = 0) VDS = Max rating VDS = Max rating TC = 125C IGSS Gate-body leakage Current (VDS = 0) VGS = 16 V VGS(th) Gate threshold voltage VDS = VGS ID = 250A RDS(on) Static drain-source on resistance VGS = 10V VGS = 4.5V ID = 35A ID = 18A V(BR)DSS Table 4. Symbol gfs Ciss Coss Crss 4/13 Test conditions Min Typ Max 30 Unit V 1 10 A A 100 nA 1 V 0.0075 0.0095 0.010 0.012 Dynamic Parameter Test conditions Forward Transconductance VDS = 15V Input capacitance Output capacitance Reverse transfer capacitance VDS = 25V f = 1MHz VGS = 0 ID = 35A Min Typ Max Unit 25 S 1650 540 130 pF pF pF STB70NF3LL Electrical characteristics Table 5. Symbol td(on) tr Switching times Parameter Test conditions Turn-on delay time Rise time ID = 35A VDD = 15V VGS = 4.5V RG = 4.7 (Resistive Load Figure 16) Qg Qgs Qgd Total gate charge Gate-source charge Gate-drain charge VDD= 15V ID= 70A VGS= 4.5V td(off) tf Turn-off delay time Fall time Table 6. Symbol ISD ISDM (1) VSD (2) trr Qrr IRRM Min Typ Max 23 165 24 8.5 12 ns ns 33 27 28 VDD = 15 V ID = 35 A VGS = 4.5 V RG = 4.7, (Resistive Load Figure 16) Unit nC nC nC ns ns Source drain diode Parameter Test conditions Min Typ Source-drain current Source-drain current (pulsed) Forward on voltage ISD = 70 A VGS = 0 Reverse recovery time ISD = 70 A di/dt = 100A/s TJ = 150C Reverse recovery charge VDD = 20 V Reverse recovery current (see test circuit Figure 14) 42 52 2.5 Max Unit 70 280 A A 1.3 V ns nC A 1. Pulse width limited by safe operating area. 2. Pulsed: Pulse duration = 300 s, duty cycle 1.5 %. 5/13 Electrical characteristics STB70NF3LL 2.1 Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Source-drain diode forward characteristics Figure 6. Static drain-source on resistance 6/13 STB70NF3LL Electrical characteristics Figure 7. Gate charge vs gate-source voltage Figure 8. Figure 9. Normalized gate threshold voltage vs temperature Capacitance variations Figure 10. Normalized on resistance vs temperature Figure 11. Normalized breakdown vs temperature 7/13 Test circuit 3 STB70NF3LL Test circuit Figure 12. Switching times test circuit for resistive load Figure 13. Gate charge test circuit Figure 14. Test circuit for inductive load Figure 15. Unclamped Inductive load test switching and diode recovery times circuit Figure 16. Unclamped inductive waveform 8/13 STB70NF3LL 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 9/13 Package mechanical data STB70NF3LL D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 D1 E 8 10 E1 0.368 0.315 10.4 0.393 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 0.126 R 0.4 0 0.015 4 3 V2 1 10/13 STB70NF3LL 5 Packing mechanical data Packing mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 MAX. R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 * on sales type 11/13 Revision history 6 STB70NF3LL Revision history Table 7. 12/13 Revision history Date Revision Changes 21-Jun-2004 6 Preliminary version 25-Jul-2006 7 New template, no content change STB70NF3LL Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 13/13