TGL41-6.8 ... TGL41-440CA, TGL41-520 TGL41-6.8 ... TGL41-440CA, TGL41-520 Surface mount unidirectional and bidirectional Transient Voltage Suppressor Diodes Unidirektionale und bidirektionale Spannungs-Begrenzer-Dioden fur die Oberflachenmontage Peak pulse power dissipation Maximale Verlustleistung 400 W Nominal breakdown voltage Nominale Abbruch-Spannung 6.8...520 V Plastic case MELF Kunststoffgehause MELF DO-213AB Weight approx. - Gewicht ca. 0.5 Type Typ 5.0 0.5 2.5 Version 2012-04-02 Dimensions - Mae [mm] 0.12 g Plastic material has UL classification 94V-0 Gehausematerial UL94V-0 klassifiziert Standard packaging taped and reeled Standard Lieferform gegurtet auf Rolle For bidirectional types (add suffix "C" or "CA"), electrical characteristics apply in both directions. Fur bidirektionale Dioden (erganze Suffix "C" oder "CA") gelten die elektrischen Werte in beiden Richtungen. Maximum ratings and Characteristics Grenz- und Kennwerte Peak pulse power dissipation (10/1000 s waveform) Impuls-Verlustleistung (Strom-Impuls 10/1000 s) TA = 25C PPPM Steady state power dissipation Verlustleistung im Dauerbetrieb TA = 25C PM(AV) 1 W 2) Peak forward surge current, 60 Hz half sine-wave Stostrom fur eine 60 Hz Sinus-Halbwelle TA = 25C IFSM 40 A 3) VBR 200 V VBR > 200 V VF VF < 3.5 V 3) < 6.5 V 3) Junction temperature - Sperrschichttemperatur Storage temperature - Lagerungstemperatur Tj TS -50...+150C -50...+150C Thermal resistance junction to ambient air Warmewiderstand Sperrschicht - umgebende Luft RthA < 45 K/W 2) Thermal resistance junction to terminal Warmewiderstand Sperrschicht - Anschluss RthT < 10 K/W Max. instantaneous forward voltage Augenblickswert der Durchlass-Spannung 1 2 3 IF = 25 A 400 W 1) Non-repetitive pulse see curve IPP = f (t) / PPP = f (t) Hochstzulassiger Spitzenwert eines einmaligen Impulses, siehe Kurve IPP = f (t) / PPP = f (t) Mounted on P.C. board with 25 mm2 copper pads at each terminal Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lotpad) an jedem Anschluss Unidirectional diodes only - Nur fur unidirektionale Dioden (c) Diotec Semiconductor AG http://www.diotec.com/ 1 TGL41-6.8 ... TGL41-440CA, TGL41-520 Maximum ratings Type Typ TGL41-6.8 Grenzwerte Breakdown voltage at IT = 1 mA Abbruch-Spannung bei IT = 1 mA *) at / bei IT = 10 mA Stand-off voltage Sperrspannung Max. rev. current Max. Sperrstrom at / bei VWM Max. clamping voltage Max. Begrenzer-Spannung at / bei IPPM (10/1000 s) VBR [V] VWM [V] ID [A] VC [V] IPPM [A] 6.8 10% 6.12...7.48 *) 5.5 1000 10.8 38.0 TGL41-6.8A 6.8 5% 6.45...7.14 *) 5.8 1000 10.5 40.0 TGL41-7.5 7.5 10% 6.75...8.25 *) 6.0 500 11.7 35.0 TGL41-7.5A 7.5 5% 7.13...7.88 *) 6.4 500 11.3 37.0 TGL41-8.2 8.2 10% 7.38...9.02 *) 6.6 200 12.5 33.0 TGL41-8.2A 8.2 5% 7.79...8.61 *) 7.0 200 12.1 34.0 TGL41-9.1 9.1 10% 8.19...10.0 7.3 50 13.8 30.0 TGL41-9.1A 9.1 5% 8.65...9.55 7.7 50 13.4 31.0 TGL41-10 10 10% 9.0...11.0 8.1 10 15.0 28.0 TGL41-10A 10 5% 9.5...10.5 8.5 10 14.5 29.0 TGL41-11 11 10% 9.9...12.1 8.9 5 16.2 26.0 TGL41-11A 11 5% 10.5...11.6 9.4 5 15.6 27.0 TGL41-12 12 10% 10.8...13.2 9.7 5 17.3 24.0 TGL41-12A 12 5% 11.4...12.6 10.2 5 16.7 25.0 TGL41-13 13 10% 11.7...14.3 10.5 5 19.0 22.0 TGL41-13A 13 5% 12.4...13.7 11.1 5 18.2 23.0 TGL41-15 15 10% 13.5...16.5 12.1 5 22.0 19.0 TGL41-15A 15 5% 14.3...15.8 12.8 5 21.2 21.0 TGL41-16 16 10% 14.4...17.6 12.9 5 23.5 17.8 TGL41-16A 16 5% 15.2...16.8 13.6 5 22.5 18.6 TGL41-18 18 10% 16.2...19.8 14.5 5 26.5 16.0 TGL41-18A 18 5% 17.1...18.9 15.3 5 25.2 16.5 TGL41-20 20 10% 18.0...22.0 16.2 5 29.1 14.0 TGL41-20A 20 5% 19.0...21.0 17.1 5 27.7 15.0 TGL41-22 22 10% 19.8...24.2 17.8 5 31.9 13.0 TGL41-22A 22 5% 20.9...23.1 18.8 5 30.6 13.7 TGL41-24 24 10% 21.6...26.4 19.4 5 34.7 12.0 TGL41-24A 24 5% 22.8...25.2 20.5 5 33.2 12.6 TGL41-27 27 10% 24.3...29.7 21.8 5 39.1 10.7 TGL41-27A 27 5% 25.7...28.4 23.1 5 37.5 11.0 TGL41-30 30 10% 27.0...30.0 24.3 5 43.5 9.6 TGL41-30A 30 5% 28.5...31.5 25.6 5 41.4 10.0 TGL41-33 33 10% 29.7...36.3 26.8 5 47.7 8.8 TGL41-33A 33 5% 31.4...34.7 28.2 5 45.7 9.0 TGL41-36 36 10% 32.4...39.6 29.1 5 52.0 8.0 TGL41-36A 36 5% 34.2...37.8 30.8 5 49.9 8.4 TGL41-39 39 10% 35.1...42.9 31.6 5 56.4 7.4 TGL41-39A 39 5% 37.1...41.0 33.3 5 53.9 7.7 TGL41-43 43 10% 38.7...47.3 34.8 5 61.9 6.7 TGL41-43A 43 5% 40.9...45.2 36.8 5 59.3 7.0 TGL41-47 47 10% 42.3...51.7 38.1 5 67.8 6.2 TGL41-47A 47 5% 44.7...49.4 40.2 5 64.8 6.4 TGL41-51 51 10% 45.9...56.1 41.3 5 73.5 5.7 TGL41-51A 51 5% 48.5...53.6 43.6 5 70.1 6.0 2 http://www.diotec.com/ (c) Diotec Semiconductor AG TGL41-6.8 ... TGL41-440CA, TGL41-520 Maximum ratings Type Typ TGL41-56 Grenzwerte Breakdown voltage at IT = 1 mA Abbruch-Spannung bei IT = 1 mA *) at / bei IT = 10 mA Stand-off voltage Sperrspannung Max. rev. current Max. Sperrstrom at / bei VWM Max. clamping voltage Max. Begrenzer-Spannung at / bei IPPM (10/1000 s) VBR [V] VWM [V] ID [A] VC [V] IPPM [A] 56 10% 50.4...61.6 45.4 5 81 5.2 TGL41-56A 56 5% 53.2...58.8 47.8 5 77 5.4 TGL41-62 62 10% 55.8...68.8 50.2 5 89 4.7 TGL41-62A 62 5% 58.9...65.1 53.0 5 85 5.0 TGL41-68 68 10% 61.2...74.8 55.1 5 98 4.2 TGL41-68A 68 5% 64.6...71.4 58.1 5 92 4.5 TGL41-75 75 10% 67.5...82.5 60.7 5 108 3.8 TGL41-75A 75 5% 71.3...78.8 64.1 5 103 4.0 TGL41-82 82 10% 73.8...90.2 66.4 5 118 3.5 TGL41-82A 82 5% 77.9...86.1 70.1 5 113 3.7 TGL41-91 91 10% 81.9...100 73.7 5 131 3.2 TGL41-91A 91 5% 86.5...95.5 77.8 5 125 3.3 TGL41-100 100 10% 90.0...110 81.0 5 144 2.9 TGL41-100A 100 5% 95.0...105 85.5 5 137 3.0 TGL41-110 110 10% 99.0...121 89.2 5 158 2.6 TGL41-110A 110 5% 105...116 94.0 5 152 2.7 TGL41-120 120 10% 108...132 97.2 5 173 2.4 TGL41-120A 120 5% 114...126 102 5 165 2.5 TGL41-130 130 10% 117...143 105 5 187 2.2 TGL41-130A 130 5% 124...137 111 5 179 2.3 TGL41-150 150 10% 135...165 121 5 215 1.9 TGL41-150A 150 5% 143...158 128 5 207 2.0 TGL41-160 160 10% 144...176 130 5 230 1.8 TGL41-160A 160 5% 152...168 136 5 219 1.9 TGL41-170 170 10% 153...187 138 5 244 1.7 TGL41-170A 170 5% 162...179 145 5 234 1.8 TGL41-180 180 10% 162...198 146 5 258 1.6 TGL41-180A 180 5% 171...189 154 5 246 1.7 TGL41-200 200 10% 180...220 162 5 287 1.4 TGL41-200A 200 5% 190...210 171 5 274 1.5 TGL41-220 220 10% 198...242 175 5 344 1.2 TGL41-220A 220 5% 209...231 185 5 328 1.2 TGL41-250 250 10% 225...275 202 5 360 1.1 TGL41-250A 250 5% 237...263 214 5 344 1.2 TGL41-300 300 10% 270...330 243 5 430 0.9 TGL41-300A 300 5% 285...315 256 5 414 1.0 350 10%0 315...385 284 5 504 0.8 TGL41-350A 350 5% 332...368 300 5 482 0.8 TGL41-400 400 10% 360...440 324 5 574 0.7 TGL41-400A 400 5% 380...420 342 5 548 0.7 TGL41-440 440 10% 396...484 356 5 631 0.6 TGL41-440A 440 5% 418...462 376 5 602 0.7 TGL41-520 520 10% 470...570 423 5 745 0.5 TGL41-350 (c) Diotec Semiconductor AG http://www.diotec.com/ 3 TGL41-6.8 ... TGL41-440CA, TGL41-520 120 [%] tr = 10 s 100 100 [%] 80 80 60 60 40 40 IPP IPP 20 20 PPP PPP 0 0 0 TA 100 50 150 [C] IPPM/2 PPPM/2 tP 0 1 1 2 3 [ms] 4 10/1000s - pulse waveform 10/1000s - Impulsform 1 Peak pulse power/current vs. ambient temperature ) Impuls-Spitzenleistung/Strom vs. Umgebungstemp.1) 2 10 [kW] 10 1 PPP 0.1 0.1s tP 1s 10s 100s 1ms 10ms Non repetitive peak pulse power versus pulse width (10/1000 wave form) Einzel-Impuls-Spitzenleistung in Abh. von der Pulsdauer (10/1000-Impuls) The range of type numbers is graded to the international E 24 standard. The standard tolerance of the breakdown voltage for each type is 10%. Suffix "A" denotes a tolerance of 5% for the breakdown voltage. e.g.: TGL41-51C = bidirectional diode, VBR = 51 V ( 10%), VWM 41.3 V at ID = 5 A TGL41-9.1A = unidirectional diode, VBR = 9.1 V ( 5%), VWM 7.7 V at ID = 50 A Die Abstufung der Typen innerhalb der Reihe entspricht dem internationalen E 24-Standard. Die Toleranz der Abbruchspannung jedes einzelnen Typs betragt in der Standardausfuhrung 10%. Suffix "A" kennzeichnet eine Toleranz der Abbruchspannung von 5%. 1 4 Mounted on P.C. board with 25 mm2 copper pads at each terminal Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lotpad) an jedem Anschluss http://www.diotec.com/ (c) Diotec Semiconductor AG