SaRonix Voltage Controlled Crystal Oscillator Technical Data CMOS / TTL S1528 Series Frequency Range: 1.5 MHz to 27 MHz Frequency Stability: 50 ppm over all conditions: operating temperature, voltage change, load change, calibration tolerance, aging, with V C = 2.5V Temperature Range: Operating: Storage: 0 to +70C, 0 to +85C, -40 to +85C -55 to +125C Supply Voltage: Recommended Operating: 5V 5% Supply Current: 20mA typ, 30mA max @ 25C, 40mA max @ operating temp range Output: Symmetry: Rise & Fall Times: ACTUAL SIZE Description A voltage controlled crystal oscillator providing precise rise and fall times to drive high performance applications. The device is packaged in a 6-pin, SMD, J leaded package. The plastic molded surface mountable package is ideal for today's automated assembly environments. Applications * For use with phase-locked loop (PLL) for clock and data recovery, frequency translation, or frequency synthesis applications in video, telephony, and data communication environments. * Plastic molded, J-lead SMD package * TTL and CMOS compatible * Tri-state output * For frequencies above 27 MHz, see SaRonix S1518 Series * Available as 3.3V version, see SaRonix S1328 Series * Available on tape & reel; 24mm tape, 500pcs per reel Logic 0: Logic 1: Load: Period Jitter RMS: Pull Characteristics: Input Impedance: Frequency Response (-3dB): Pullability: Control Voltage: Transfer Function: Linearity: Center Control Voltage: See Part Numbering Guide and Output Waveform 5ns max, 20% to 80% VDD, CMOS 4ns max, 0.4V to 2.4 VDC, TTL 10% VDD max for CMOS or 0.4 VDC max for TTL VCC -0.6 VDC for CMOS or 2.4 VDC min for TTL 50pF or 10 TTL 8ps max 50K min 20kHz 20, 50, 70, 100 ppm APR* (See Part Numbering Guide) 0.5 to 4.5V Frequency increases when Control Voltage increases 10% max 2.5V Mechanical: Shock: Solderability: Terminal Strength: Vibration: Resistance to Soldering Heat: Environmental: Thermal Shock: Moisture Resistance: MIL-STD-883, MIL-STD-883, MIL-STD-202, MIL-STD-883, MIL-STD-202, Method 2002, Condition B Method 2003 Method 211, Conditions A & C Method 2007, Condition A Method 210, Condition I or J MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 Output Waveform CMOS Tr TTL Tf Tr Tf VDD 1 LEVEL 80% V DD 2.5 VDC 1.5 VDC 0.5 VDC 50% V DD 20% V DD 0 LEVEL GND SYMMETRY SYMMETRY * APR = (VCXO Pull relative to specified Output Freq. @ nominal control voltage) - (VCXO Freq. Stability) DS-147 SaRonix REV C 141 Jefferson Drive * Menlo Park, CA 94025 * USA * 650-470-7700 * 800-227-8974 * Fax 650-462-9894 SaRonix Voltage Controlled Crystal Oscillator CMOS / TTL Technical Data S1528 Series Solder Reflow Guide Pin 2 Input Pin 4 Output Logic 1 or NC Oscillation Logic 0 or GND High Impedance or Standby Function Temperature - C Tri-State Logic Table Package Details 200 Preheat 183 10C 5 4 8.74 .344 1 2 10.4 max .409 3 13.2 max .520 5.9 .234 6.1 max .240 0.46 .018 Time 1 - 2 minutes 10 sec max S1528 C G E A - 6.1760 (T) (T) = Tape & Reel full reel increments only Series S1528 = 5V VCXO, J Lead SMD Logic Type T = TTL C = CMOS Absolute Pull Range* C = 20 ppm G = 50 ppm H = 100 ppm*** M = 70 ppm Frequency (MHz) Operating Temperature C = 0 to +70C E = 0 to +85C L = -40 to +85C 2.54 .100 Test Circuits .75 .030 SIMULATED TEST LOAD VCC 390 mA M Pin 5 Pin 6 8.74 .344 Pin 4 OSCILLATOR 0.1 F POWER SUPPLY Pin Functions: Pin 1: Control Voltage Pin 2: Tri-State Control Pin 3: GND Symmetry A = 45/55% max** B = 40/60% max * APR = (VCXO Pull relative to specified Output Freq. @ nominal control voltage) - (VCXO Freq. Stability) ** Not available at all frequencies; TTL 13.5 to 27 MHz only *** Not available at all frequencies and all operating temperature ranges, please contact SaRonix 5.08 .200 1.50.15 .059.006 Cooling 150 Part Numbering Guide 6 0.51 x45 CHAM .020 4C/sec max 4C/sec max Required Input Levels on Pin 2: Logic 1 = 3.0V min Logic 0 = 0.5V max DENOTES PIN 1 Reflow 240C max 250 Scale: None (Dimensions in mm ) inches Recommended Land Pattern Pin 2 Pin 1 Pin 4: Output Pin 5: N/C Pin 6: +5VDC (V CC) TRI-STATE INPUT OR ENABLE/DISABLE (current limited on fixture) NOTE A: C L includes probe and jig capacitance. TTL TEST CIRCUIT mA M Pin 5 Pin 6 POWER SUPPLY Pin 4 OSCILLATOR 0.1 F 8.74 .344 CL = 15 pF (Note A) VC 5.08 .200 1.27 .050 Pin 3 Pin 1 Pin 2 CL = 50 pF (Note A) Pin 3 VC 2.5 .100 2.54 .100 TRI-STATE INPUT OR ENABLE/DISABLE (current limited on fixture) NOTE A: CL includes probe and jig capacitance. HCMOS TEST CIRCUIT All specifications are subject to change without notice. SaRonix DS-147 REV C 141 Jefferson Drive * Menlo Park, CA 94025 * USA * 650-470-7700 * 800-227-8974 * Fax 650-462-9894