6 LAKE STREET, LAWRENCE, MASSACHUSETTS 01841
PHONE (978) 620-2600 FAX (978) 689-0803
WEBSITE: http://www.microsemi.com 93
MAXIMUM RATINGS
Operating Temperature: -65°C to +175°C
Storage Temperature: -65°C to +175°C
DC Power Dissipation: 500 mW @ TEC = +125°C
Power Derating: 10 mW / °C above TEC = +125°C
Forward Voltage @ 200mA: 1.1 volts maximum
•
1N746AUR-1 THRU 1N759AUR-1 AVAILABLE IN JAN, JANTX AND JANTXV
PER MIL-PRF-19500/127
•
1N4370AUR-1 THRU 1N4372AUR-1 AVAILABLE IN JAN, JANTX AND JANTXV
PER MIL-PRF-19500/127
• LEADLESS PACKAGE FOR SURFACE MOUNT
• METALLURGICALLY BONDED
ELECTRICAL CHARACTERISTICS @ 25°C
CDI NOMINAL ZENER MAXIMUM MAXIMUM MAXIMUM
TYPE ZENER TEST ZENER REVERSE CURRENT ZENER
NUMBER VOLTAGE CURRENT IMPEDANCE CURRENT
(NOTE 3)
(NOTE 1) VZ @ 1ZT 1ZT ZZT @ 1ZT IR @ VR1ZM
(NOTE 2)
VOLTS mA OHMS
µ
A VOLTS mA
CDLL4370A 2.4 20 30 100 1.0 155
CDLL4371A 2.7 20 30 60 1.0 140
CDLL4372A 3.0 20 29 30 1.0 125
CDLL746A 3.3 20 28 5 1.0 120
CDLL747A 3.6 20 24 3 1.0 110
CDLL748A 3.9 20 23 2 1.0 100
CDLL749A 4.3 20 22 2 1.0 90
CDLL750A 4.7 20 19 5 1.5 85
CDLL751A 5.1 20 17 5 2.0 75
CDLL752A 5.6 20 11 5 2.5 70
CDLL753A 6.2 20 7 5 3.5 65
CDLL754A 6.8 20 5 2 4.0 60
CDLL755A 7.5 20 6 2 5.0 55
CDLL756A 8.2 20 8 1 6.0 50
CDLL757A 9.1 20 10 1 7.0 45
CDLL758A 10.0 20 17 1 8.0 40
CDLL759A 12.0 20 30 1 9.0 35
NOTE 1 Zener voltage tolerance on "A" suffix is +5%. No Suffix denotes + 10% tolerance.
"C" suffix denotes + 2% tolerance and "D" suffix denotes + 1% tolerance.
NOTE 2 Zener voltage is measured with the device junction in thermal equilibrium at an ambient
temperature of 25°C, +3°C.
NOTE 3 Zener impedance is derived by superimposing on 1ZT A 60Hz rms a.c. current equal
to 10% of 1ZT.
FIGURE 1
DESIGN DATA
CASE: DO-213AA, Hermetically sealed
glass case. (MELF, SOD-80, LL34)
LEAD FINISH: Tin / Lead
THERMAL RESISTANCE: (ROJEC):
100 °C/W maximum at L = 0 inch
THERMAL IMPEDANCE: (ZOJX): 25
°C/W maximum
POLARITY: Diode to be operated with
the banded (cathode) end positive.
MOUNTING POSITION: Any.
MOUNTING SURFACE SELECTION:
The Axial Coefficient of Expansion
(COE) Of this Device is Approximately
+6PPM/°C. The COE of the Mounting
Surface System Should Be Selected To
Provide A Suitable Match With This
Device.
MILLIMETERS INCHES
DIM MIN MAX MIN MAX
D 1.60 1.70 0.063 0.067
F 0.41 0.55 0.016 0.022
G 3.30 3.70 .130 .146
G1 2.54 REF. .100 REF.
S 0.03 MIN. .001 MIN.
1N746AUR-1 thru 1N759AUR-1
and
1N4370AUR-1 thru 1N4372AUR-1
and
CDLL746 thru CDLL759A
and
CDLL4370 thru CDLL4372A
94
CDLL746 thru CDLL759A
and
CDLL4370 thru CDLL4372A
100
50
20
10
5
2
14 6 10 20 40 60 100
FIGURE 3
operating current (mA)
ZENER IMPEDANCE VS. OPERATING CURRENT
0 25 50 75 100 125 150 175
TEC , End cap temperature (°C)
POWER DERATING CURVE
500
400
300
200
100
0
Pd, Rated Power
Dissipation (mW)
FIGURE 2
ZENER IMPEDANCE ZZT (OHMS)
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Microsemi:
JANTXV1N746AUR-1 1N4750AUR JANTX1N758AUR-1 CDLL754A CDLL759A JAN1N747AUR-1
JANTXV1N748AUR-1 1N4746AUR JANTXV1N749AUR-1 1N4752AUR 1N4756AUR CDLL4371A
JANTX1N754AUR-1 1N4754AUR JANTX1N749AUR-1 JANTXV1N750AUR-1 1N4751AUR JANTX1N759AUR-1
CDLL752 CDLL750 CDLL759 CDLL4370A CDLL755A CDLL749 1N4748AUR JAN1N758AUR-1
JANTXV1N4371AUR-1 CDLL755 1N4759AUR CDLL757A CDLL4371 JAN1N746AUR-1 CDLL4372 CDLL749A
1N4757AUR CDLL758A CDLL751A JANTX1N751AUR-1 JANTXV1N747AUR-1 1N4754UR-1 CDLL748A
CDLL4370 CDLL747 CDLL751 JANTX1N751DUR-1 JANTX1N757AUR-1 JANTX1N748AUR-1 JAN1N749AUR-1
CDLL746 1N4749AUR JANTX1N752AUR-1 CDLL752A CDLL746A 1N4755AUR CDLL757 CDLL753
JANTX1N4370AUR-1 CDLL756A CDLL754 CDLL747A JAN1N748AUR-1 JANTX1N4371AUR-1 1N4753AUR
JANTXV1N753AUR-1 1N4747AUR CDLL4372A JAN1N754AUR-1 JANTX1N753AUR-1 JAN1N4371AUR-1
JAN1N750AUR-1 CDLL748 CDLL756 CDLL758 JANTXV1N4370AUR-1 JANTX1N747AUR-1 JANTX1N750AUR-1
JANTXV1N758AUR-1 JANTXV1N756AUR-1 1N4758AUR CDLL753A JANTXV1N754AUR-1
