https://www.phoenixcontact.com/us/products/0709026 Panel feed-through terminal block-HDFKV 4-0709026 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Panel feed-through terminal block, connection method: Screw connection with tension sleeve, Screw connection with tension sleeve, number of positions: 1, load current: 32 A, cross section: 0.2 mm-6 mm, connection direction of the conductor to plug-in direction: -90 , width: 8.1 mm, color: gray The figure shows a 7-position version Your advantages Well-known connection principle allows worldwide use Low temperature rise, thanks to maximum contact force Tool-free snap-in principle enables easy mounting on the device panel Automatic panel thickness compensation enables universal use Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4017918004880 Weight per Piece (excluding packing) 8.804 g Custom tariff number 85369010 Country of origin Greece Technical data Item properties Brief article description Panel feed-through terminal block Range of articles HDFKV 4 Pitch 8.1 mm 01/17/2021Page1/9 https://www.phoenixcontact.com/us/products/0709026 Panel feed-through terminal block-HDFKV 4-0709026 Technical data Item properties Number of positions 1 Number of connections 2 Number of potentials 1 Electrical parameters Nominal current 32 A Nom. voltage 400 V (With metal panels of 1 mm ... 2.5 mm) Maximum load current 41 A (with 6 mm conductor cross section) Rated voltage (III/3) 400 V Rated surge voltage (III/3) 6 kV Connection capacity, external Connection method Screw connection with tension sleeve Connection direction of the conductor to plug-in direction -90 Conductor cross section solid 0.2 mm ... 6 mm Conductor cross section flexible 0.2 mm ... 4 mm Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm ... 4 mm Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm ... 4 mm 2 conductors with same cross section, solid 0.2 mm ... 1.5 mm 2 conductors with same cross section, flexible 0.2 mm ... 1.5 mm 2 conductors with same cross section, flexible, with ferrule without plastic sleeve 0.25 mm ... 1.5 mm 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 0.5 mm ... 2.5 mm Internal cylindrical gage A4 Stripping length 9 mm Torque 0.6 Nm ... 0.8 Nm Connection capacity, internal Connection method Screw connection with tension sleeve Connection direction of the conductor to plug-in direction -90 Conductor cross section solid 0.2 mm ... 6 mm Conductor cross section flexible 0.2 mm ... 4 mm Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm ... 4 mm Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm ... 4 mm 2 conductors with same cross section, solid 0.2 mm ... 1.5 mm 2 conductors with same cross section, flexible 0.2 mm ... 1.5 mm 2 conductors with same cross section, flexible, with ferrule without plastic sleeve 0.25 mm ... 1.5 mm 01/17/2021Page2/9 https://www.phoenixcontact.com/us/products/0709026 Panel feed-through terminal block-HDFKV 4-0709026 Technical data Connection capacity, internal 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 0.5 mm ... 2.5 mm Internal cylindrical gage A4 Stripping length 9 mm Torque 0.6 Nm ... 0.8 Nm Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Surface characteristics tin-plated Material data - housing Housing color gray (7042) Insulating material PA Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN60695-2-12 850 Glow wire ignition temperature GWIT according to EN60695-2-13 775 Temperature for the ball pressure test according to EN60695-10-2 125 C Dimensions for the product Caption Schematische Abbildung - weitere Details siehe Produktfamilienzeichnung im Download Center Width [ w ] 8.1 mm Height [ h ] 21 mm Pitch 8.1 mm Packaging information Type of packaging packed in cardboard Pieces per package 50 Denomination packing units Pcs. Termination and connection method Test for conductor damage and slackening IEC60947-7-1:2002-07 Test passed Pull-out test Pull-out test IEC60947-7-1:2002-07 Conductor cross section / conductor type / tensile force 0.2 mm / solid / > 10 N 0.2 mm / flexible / > 10 N 01/17/2021Page3/9 https://www.phoenixcontact.com/us/products/0709026 Panel feed-through terminal block-HDFKV 4-0709026 Technical data Pull-out test 6 mm / solid / > 80 N 4 mm / flexible / > 60 N Mechanical tests according to standard Test specification IEC 60947-7-1 (in parts) Electrical tests Rated current 32 A Conductor cross section 4 mm Air clearances and creepage distances Clearances and creepage distances Metal wall 1.0mm...2.5mm IEC60947-7-1:2002-07 Application Metal wall 1.0mm...2.5mm Specification IEC60947-7-1:2002-07 Minimum clearance - inhomogeneous field (III/3) 5.5 mm Minimum creepage distance value (III/3) 5.5 mm Temperature-rise test Specification IEC60947-7-1:2002-07 Requirement temperature-rise test Increase in temperature 45 K Standards and Regulations Connection in acc. with standard CSA IEC60947-7-1 Flammability rating according to UL 94 V0 Safety note * Only electrically qualified personnel may install and operate the product. To recognize and prevent danger, the qualified personnel must be familiar with the basics of electrical engineering. * Observe the technical data provided here and refer to the documents listed under "Downloads". The download area contains important information, such as installation notes, technical drawings, and 3D data. * The cable entry funnel is not safe to touch. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch protection. There is no electrical contact to the housing. Ensure protective grounding is established for green-yellow color versions. Vibration test Specification IEC60068-2-6:1995-03 Frequency 10 - 150 - 10 Hz Sweep speed 1 octave/min Amplitude 0.35 mm (10 - 60.1 Hz) Acceleration 5 g (60.1 - 150 Hz) 01/17/2021Page4/9 https://www.phoenixcontact.com/us/products/0709026 Panel feed-through terminal block-HDFKV 4-0709026 Technical data Vibration test Test duration per axis 2.5 h Glow-wire test Specification IEC 60695-2-11:2000-10 Temperature 960 C Time of exposure 30 s Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings Dimensional drawing 15 8,1 11,5 21 6,5 20 23,5 5,4 2,8 24,5 Dimensional drawing 1-4 Classifications eCl@ss eCl@ss 10.0.1 27141134 eCl@ss 11.0 27141134 eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141134 eCl@ss 8.0 27141134 eCl@ss 9.0 27141134 01/17/2021Page5/9 https://www.phoenixcontact.com/us/products/0709026 Panel feed-through terminal block-HDFKV 4-0709026 Classifications ETIM ETIM 2.0 EC001283 ETIM 3.0 EC001283 ETIM 4.0 EC001283 ETIM 5.0 EC001283 ETIM 6.0 EC001283 ETIM 7.0 EC001283 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 UNSPSC 18.0 39121410 UNSPSC 19.0 39121410 UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 Approvals Approvals Approvals CSA / KEMA-KEUR / IECEE CB Scheme / EAC / cULus Recognized Ex Approvals Approval details CSA http://www.csagroup.org/services-industries/product-listing/ Nominal voltage UN 300 V Nominal current IN 30 A mm/AWG/kcmil 22-10 13631 01/17/2021Page6/9 https://www.phoenixcontact.com/us/products/0709026 Panel feed-through terminal block-HDFKV 4-0709026 Approvals KEMA-KEUR http://www.dekra-certification.com Nominal voltage UN 250 V Nominal current IN 32 A mm/AWG/kcmil 4 IECEE CB Scheme http://www.iecee.org/ Nominal voltage UN 250 V Nominal current IN 32 A mm/AWG/kcmil 4 2169260.01 NL-29947 EAC B.01687 cULus Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E60425-19870911 B D Nominal voltage UN 300 V 300 V Nominal current IN 30 A 10 A mm/AWG/kcmil 30-10 30-10 Accessories Accessories Insertion bridge Insertion bridge-EBS 2- 8-3118151 Insertion bridge, pitch: 8 mm, number of positions: 2, color: gray 01/17/2021Page7/9 https://www.phoenixcontact.com/us/products/0709026 Panel feed-through terminal block-HDFKV 4-0709026 Accessories Insertion bridge-EBS 3- 8-3118148 Insertion bridge, pitch: 8 mm, number of positions: 3, color: gray Insertion bridge-EBS 10- 8-3118135 Insertion bridge, pitch: 8 mm, number of positions: 10, color: gray Screwdriver tools Screwdriver-SZS 0,6X3,5-1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip Terminal marking Zack marker strip-ZB 6:UNBEDRUCKT-1051003 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10 01/17/2021Page8/9 https://www.phoenixcontact.com/us/products/0709026 Panel feed-through terminal block-HDFKV 4-0709026 Accessories Marker for terminal blocks-UC-TM 6-0818085 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80 Zack Marker strip, flat-ZBF 6:UNBEDRUCKT-0808710 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm, Number of individual labels: 10 Marker for terminal blocks-TMT 6 R-0816498 Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, perforated, mounting type: snap into universal marker groove, snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 6.35 x 6.15 mm, Number of individual labels: 16000 Marker for terminal blocks-TMT (EX9,5)R-0828295 Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: snap into universal marker groove, snap into tall marker groove, for terminal block width: 50000 mm, lettering field size: 9.5 x 50000 mm, Number of individual labels: 1 Phoenix Contact 2021 (c) - all rights reserved http://www.phoenixcontact.com 01/17/2021Page9/9