I&Q NETWORKS IQF-4E Series Catalog and Custom Units to 300 MHz / Octave LO Bandwidth / Low Profile, Hi-Rel Package Outline of E-Size Flatpack PRINCIPAL SPECIFICATIONS Model Number IQF-4E-***B RF/LO Center Frequency, fo 10 to 300 MHz Bandwidth, MHz 67% of fo RF and Video Bandwidths are typically much greater than specified. For complete model number, replace *** with desired LO center frequency, fo, in MHz. GENERAL SPECIFICATIONS RF and LO Input Characteristics NOTES: Impedance: VSWR: RF Power Level: LO Power Level 1. Tolerance on 3 place decimals .010(.25) except as noted. 2. Dimensions in inches over millimeters. 3. Dimensions marked with * apply only at body. 4. All unmarked pins are case ground. 50 nom. 1.5 :1 max. 0 dBm nom. +10 dBm nom. I & Q Output Characteristics Video Bandwidth: DC to 50 MHz nom. Output Impedance: 50 nom. Conversion Loss (RF to I or Q): 10 dB typ.,12 dB max. General Notes: 1. I & Q networks are integrated devices that produce two quadrature-phased, equal amplitude signals when fed by RF and LO signals. IF Balance (I to Q) Phase: 2. With the addition of an external IF 90 Hybrid, complete systems are formed that are useful in image rejection and single sideband modulators. Amplitude: 3. These units are also excellent as phase correlators in closed loop applications and vector modulator sub-systems. 4. I & Q networks can also be used in digital systems as a QPSK demodulator where it recovers two data channels from the incoming phase information. The QPSK input is applied to the RF port while the recovered carrier is applied to the LO port resulting in the two independent data outputs at the I and Q ports. 5. Merrimac I & Q networks comply with the relevant sections of MIL-M-28837 and may be supplied screened for 29Apr96 90 4 typ., 90 5 max. 0.25 dB typ., 0.5 dB max. Weight, nominal: 0.32 oz (9 g) Operating Temp: -- 55 to +85C RF and Video Bandwidths are typically much greater than specified. AVAILABLE OPTIONS Phase Balance: Amplitude Balance: Conversion Loss: Narrowband LO: 90 3 max. (for narrow band) 0.2 dB max. 8 dB typ., 10 dB max. see IQF-20 series For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX 973-575-0531