Power Transistors 2SD1444A Silicon NPN epitaxial planar type For power amplification and low-voltage switching Complementary to 2SB0953A Parameter Symbol Rating 16.70.3 14.00.5 Absolute Maximum Ratings TC = 25C 2.70.2 3.10.1 1.40.1 Solder Dip (4.0) * Low collector-emitter saturation voltage VCE(sat) * High-speed switching * Satisfactory linearity of forward current transfer ratio hFE * Large collector current IC * Full-pack package which can be installed to the heat sink with one screw 4.20.2 5.50.2 7.50.2 Features 10.00.2 4.20.2 0.70.1 Unit: mm 0.80.1 1.30.2 0.5+0.2 -0.1 2.540.3 Unit 5.080.5 Collector-base voltage (Emitter open) VCBO 50 V Collector-emitter voltage (Base open) VCEO 40 V Emitter-base voltage (Collector open) VEBO 5 V Collector current IC 7 A Peak collector current ICP 12 A 30 W Collector power dissipation PC Ta = 25C 1: Base 2: Collector 3: Emitter EIAJ: SC-67 TO-220F-A1 Package 1 2 3 2.0 Junction temperature Tj 150 C Storage temperature Tstg -55 to +150 C Electrical Characteristics TC = 25C 3C Parameter Symbol Collector-emitter voltage (Base open) VCEO IC = 10 mA, IB = 0 Collector-base cutoff current (Emitter open) ICBO VCB = 50 V, IE = 0 Emitter-base cutoff current (Collector open) IEBO VEB = 5 V, IC = 0 Forward current transfer ratio hFE1 VCE = 2 V, IC = 0.1 A 45 VCE = 2 V, IC = 2 A 60 hFE2 * Conditions Collector-emitter saturation voltage VCE(sat) IC = 5 A, IB = 0.16 A Base-emitter saturation voltage VBE(sat) IC = 5 A, IB = 0.16 A Min Typ Max Unit 50 A 50 A 40 V 260 0.6 1.5 V V VCE = 10 V, IC = 0.5 A, f = 10 MHz 150 MHz Cob VCB = 10 V, IE = 0, f = 1 MHz 110 pF Turn-on time ton IC = 2 A, IB1 = 66 mA, IB2 = -66 mA 0.3 s Storage time tstg VCC = 20 V 0.3 s 0.1 s Transition frequency fT Collector output capacitance (Common base, input open circuited) Fall time tf Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. 2. *: Rank classification Rank R Q P hFE2 60 to 120 90 to 180 130 to 260 Publication date: February 2003 SJD00194AED 1 2SD1444A IC VCE TC=25C 40mA 20 (2) 10 IB=45mA 5 Collector current IC (A) Collector power dissipation PC (W) (1) 30 VCE(sat) IC 6 (1)TC=Ta (2)With a 100x100x2mm Al heat sink (3)With a 50x50x2mm Al heat sink (4)Without heat sink (PC=2W) 35mA 4 30mA 25mA 3 20mA 15mA 2 10mA 5mA 1 (3) (4) 0 0 25 50 75 100 125 0 150 0 2 4 Collector-emitter saturation voltage VCE(sat) (V) PC Ta 40 6 Ambient temperature Ta (C) Collector-emitter voltage VCE (V) VBE(sat) IC hFE IC IC/IB=20 10 TC=100C 1 25C -25C 0.1 0.01 0.1 1 10 Collector current IC (A) fT I C 100C 25C 0.1 0.01 0.1 1 TC=100C 25C 100 -25C 10 1 0.1 10 tstg tf 0.1 0.01 1 2 3 4 Collector current IC (A) 2 10 IC t=1ms 1 5 DC 0.1 0.01 0 Non repetitive pulse TC=25C t=10ms ton 1 10 100 1000 Collector-emitter voltage VCE (V) SJD00194AED 10 1 0.1 1 Collector current IC (A) ICP 1 100 0.1 0.01 10 Safe operation area 100 Pulsed tw=1ms Duty cycle=1% IC/IB=30 (IB1=-IB2) VCC=20V TC=25C Collector current IC (A) Turn-on time ton , Storage time tstg , Fall time tf (s) ton, tstg, tf IC 10 1 Collector current IC (A) Collector current IC (A) 100 Transition frequency fT (MHz) 1000 TC=-25C 1 VCE=10V f=10MHz TC=25C VCE=2V IC/IB=20 10 Forward current transfer ratio hFE Base-emitter saturation voltage VBE(sat) (V) 1000 10 2SD1444A Rth t Thermal resistance Rth (C/W) 103 (1)Without heat sink (2)With a 100x100x2mm Al heat sink 102 (1) (2) 10 1 10-1 10-2 10-4 10-3 10-2 10-1 1 10 102 103 104 Time t (s) SJD00194AED 3 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2002 JUL