The P3 Series: Superior, not
Superfluous. Fluke is how
other tools are measured.
Fluke Industrial
Thermal Imagers
Models: Ti32, Ti29 and Ti27. Three models specifically
for industrial and electrical applications.
The greatest technological advancement in thermography
may be how Fluke has made it so simple to capture images
and analyze data right out of the box.
Superior image quality
Industry-leading thermal sensitivity and spatial resolution
combined with a high definition display, creates the sharp-
est images in the industry.
One-handed, easy-to-use interface
With just a push of your thumb, go from one-handed
manual smart focus to adding picture-in-picture and even
add voice comments.
Torture tested™
Before a Fluke goes into your hands, we drop it from ours.
Only Fluke thermal imagers are designed from the inside
out to withstand a 6.5 ft drop.
Patented Fluke IR-Fusion®
(Picture-in-picture and auto blending)
Precision visible and IR image alignment allows Fluke
to offer the only on-camera blended infrared and visible
image to better diagnose issues.
Interchangeable lenses
Interchangeable wide-angle and IR-Fusion compatible
telephoto lenses to cover any application.
Patented Fluke IR-Fusion® Technology
Technical Data
More than picture in picture
Infrared images alone can be difficult to under-
stand, which is why Fluke pioneered IR-Fusion,
a revolutionary marriage of visible and infrared
images never before seen in commercial or
industrial thermal imagers. Automatically
capturing a visible image with every infrared
image allows to you always know exactly what
you’re looking at.
Industrial
Mechanical,
electromechanical
and general building
maintenance.
Process
Refractory insulation,
tank and vessel levels,
steam systems and traps,
pipes and valves, etc.
Electrical
Unbalanced loads,
overloaded systems,
wiring mistakes or
component failure, etc.
Made in
the U.S.A.
of U.S. and
non U.S.
parts
Ti27
•240x180IR
resolution
•43,200total
IRpixels
Ti29
•280x210IR
resolution
•58,800total
IRpixels
Ti32
•320x240IR
resolution
•76,800total
IRpixels
Fluke. Not just infrared, infrared you can use.
®
Fluke Competitor
Not all fusion is created equal
Don’t be fooled by imitators. No other manufacturer
can boast on-camera blending. Compare the images.
Only Fluke has mastered the ability to create the
industry’s only transparent, perfectly blended and
aligned visible and infrared images.
2 Fluke Corporation Ti32, Ti29 and Ti27 Industrial Thermal Imagers
Detailed specifications
Ti32 Ti29 Ti27
Temperature
Temperature measurement range
(not calibrated below -10 °C) -20 °C to +600 °C (-4 °F to +1112 °F)
Temperature measurement
accuracy ± 2 °C or 2 % (at 25 °C nominal, whichever is greater)
On-screen emissivity correction Yes
On-screen reflected background
temperature compensation Yes
On-screen transmission correction Yes
Imaging performance
Image capture frequency 9 Hz refresh rate or 60 Hz refresh rate depending upon model variation
Detector type Focal Plane Array, uncooled
microbolometer, 320 x 240 pixels
Focal Plane Array, uncooled
microbolometer, 280 x 210 pixels
Focal Plane Array, uncooled
microbolometer, 240 x 180 pixels
Thermal sensitivity (NETD) ≤ 0.045 °C at 30 °C target temp. (45 mK) ≤ 0.05 °C at 30 °C target temp (50 mK)
Total pixels 76,800 58,800 43,200
Infrared spectral band 7.5 µm to 14 µm (long wave)
Visual (visible light) camera Industrial performance 2.0 megapixel
Minimum focus distance 45 cm (approx. 18 in)
Standard infrared lens type
Field of view 23 ° x 17 °
Spatial resolution (IFOV) 1.25 mRad 1.43 mRad 1.67 mRad
Minimum focus distance 15 cm (approx. 6 in)
Optional telephoto infrared lens type
Field of view 11.5 ° x 8.7 °
Spatial resolution (IFOV) 0.63 mRad 0.72 mRad 0.84 mRad
Minimum focus distance 45 cm (approx. 18 in)
Optional wide-angle infrared lens type
Field of view 46 ° x 34 °
Spatial resolution (IFOV) 2.50 mRad 2.86 mRad 3.34 mRad
Minimum focus distance 7.5 cm (approx. 3 in)
Focus mechanism Manual, one-handed Smart Focus capability
Image presentation
Palettes
Standard Ironbow, Blue-Red, High Contrast, Amber, Amber Inverted, Hot Metal, Grayscale, Grayscale Inverted
Ultra Contrast™Ironbow Ultra, Blue-Red Ultra, High Contrast Ultra, Amber Ultra, Amber Inverted Ultra, Hot Metal Ultra,
Grayscale Ultra, Grayscale Inverted Ultra
Level and span Smooth auto-scaling and manual scaling of level and span
Fast auto toggle between manual
and auto modes Yes
Fast auto-rescale in manual mode Yes
Minimum span (in manual mode) 2.5 °C (4.5 °F)
Minimum span (in auto mode) 5 °C (9 °F)
IR-Fusion® information
Automatically aligned (parallax
corrected) visual and IR blending Yes
Picture-In-Picture (PIP) Three levels of on-screen IR blending displayed in center of LCD
Full screen infrared Three levels of on-screen IR blending displayed on LCD
Color alarms (temperature alarms) High-temperature alarm (user-selectable)
Voice annotation 60 seconds maximum recording time per image; reviewable playback on imager
Image capture and data storage
The Ti32, Ti29 and Ti27 allow users to adjust palette, blending, level, span, IR-Fusion® mode, emissivity, and reflected
background temperature compensation, and transmission correction on a captured image before it is stored
Image capture, review, save
mechanism One-handed image capture, review, and save capability
Storage medium SD Memory Card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR and linked visual images each with
60 seconds voice annotations, or 3000 basic bitmap (.bmp) images, or 3000 jpeg (.jpeg) images; transferrable to PC via
included multi-format USB card reader
File formats Non-radiometric (.bmp) or (.jpeg) or fully-radiometric (.is2)
No analysis software required for non-radiometric (.bmp and .jpeg) files
Export file formats w/SmartView®
software BMP, DIB, GIF, JPE, JFIF, JPEG, JPG, PNG, TIF, and TIFF
Memory review Thumbnail view navigation and review selection
3 Fluke Corporation Ti32, Ti29 and Ti27 Industrial Thermal Imagers
Ordering information
FLK-Ti32 9 Hz Industrial-Commercial Thermal Imager, 9 Hz
FLK-Ti32 60 Hz Industrial-Commercial Thermal Imager, 60 Hz
FLK-Ti29 9 Hz Industrial-Commercial Thermal Imager, 9 Hz
FLK-Ti29 60 Hz Industrial-Commercial Thermal Imager, 60 Hz
FLK-Ti27 9 Hz Industrial-Commercial Thermal Imager, 9 Hz
FLK-Ti27 60 Hz Industrial-Commercial Thermal Imager, 60 Hz
Included
Thermal imager with standard infrared lens; ac power supply and battery pack charger (including
mains adapters); two, rugged lithium ion smart battery packs; SD memory card; multi-format USB
memory card reader for downloading images into your computer; SmartView® software with free
software upgrades for life; rugged, hard carrying case; soft transport bag; adjustable hand strap;
printed users manual; warranty registration card.
Optional accessories
FLK-LENS/TELE1 Telephoto Infrared Lens
FLK-LENS/WIDE1 Wide-angle Infrared Lens
TI-CAR-CHARGER Thermal Imager Vehicle Charger
TI-VISOR Thermal Imager Visor
BOOK-ITP Introduction to Thermography Principles Book
TI-TRIPOD Tripod Mounting Base Accessory
Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa +31 (0) 40 2675 200 or
Fax +31 (0) 40 2675 222
In Canada (800)-36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com
©2011 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 3/2011 4008148A D-EN-N
Modification of this document is not permitted
without written permission from Fluke Corporation.
Fluke. Not just infrared.
Infrared you can use.™
Operating temperature -10 °C to +50 °C (14 °F to 122 °F)
Storage temperature -20 °C to +50 °C (-4 °F to 122 °F) without batteries
Relative humidity 10 % to 95 % non-condensing
Display 9.1 cm (3.7 in) diagonal landscape color VGA (640 x 480) LCD with backlight and clear protective cover
Controls and adjustments User selectable temperature scale (°C/°F)
Language selection
Time/Date set
Emissivity selection
Reflected background temperature compensation
Transmission correction
User selectable hot spot and cold spot, and center point on the image (other custom markers and shapes in SmartView® software)
High temperature alarm
User selectable backlight: “Full Bright” or “Auto”
Information display preference
Software SmartView® full analysis and reporting software included
Batteries Two lithium ion rechargeable smart battery packs with five-segment LED display to show charge level
Battery life Four+ hours continuous use per battery pack (assumes 50 % brightness of LCD)
Battery charge time 2.5 hours to full charge
AC battery charging Two-bay ac battery charger (110 V ac to 220 V ac, 50/60 Hz) (included), or in-imager charging. AC mains adapters included.
Optional 12 V automotive charging adapter.
AC operation AC operation with included power supply (110 V ac to 220 V ac, 50/60 Hz). AC mains adapters included.
Power saving Sleep mode activated after five minutes of inactivity, automatic power off after 30 minutes of inactivity
Safety standards CSA (US and CAN): C22.2 No. 61010-1-04, UL: UL STD 61010-1 (2nd Edition), ISA: 82.02.01
Electromagnetic compatibility Meets all applicable requirements in EN61326-1:2006
C Tick IEC/EN 61326-1
US FCC CFR 47, Part 15 Class B
Vibration 0.03 g2/Hz (3.8 grms), IEC 68-2-6
Shock 25 g, IEC 68-2-29
Drop 2 meter (6.5 feet) with standard lens
Size (H x W x L) 27.7 cm x 12.2 cm x 17.0 cm (10.9 in x 4.8 in x 6.7 in)
Weight (battery included) 1.05 kg (2.3 lb)
Enclosure rating IP54 (protected against dust, limited ingress; protection against water spray from all directions)
Warranty Two-years (standard), extended warranties are available.
Recommended calibration cycle Two-years (assumes normal operation and normal aging)
Supported Languages Czech, English, Finnish, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Simplified Chinese, Spanish,
Swedish, Traditional Chinese, and Turkish
General specifications
