DC60 Series
• Bi-polar transistor output
• Ratings from 3A to 7A @ 60 VDC
• AC or DC control
• UL and cUL Recognized (E116950)
PRODUCT SELECTION
Control Voltage 3A 5A 7A
3.5-32 VDC DC60S3 DC60S5 DC60S7
90-280 Vrms/VDC DC60SA3 DC60SA5 DC60SA7
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description 3A 5A 7A
Operating Voltage [VDC] 3-60 3-60 3-60
Maximum Off-State Leakage Current @ Rated Voltage [mA] 0.1 0.1 0.1
Maximum Load Current [ADC] (2) 357
Minimum Load Current [mA] 20 20 20
Maximum Surge Current [Adc] (10ms) 610 14
Maximum On-State Voltage Drop @ Rated Current [Vdc] 1.3 1.5 1.7
Thermal Resistance Junction to Case (Rjc ) [°C/W] 2.2 2.2 2.2
INPUT SPECIFICATIONS (1)
Description DC60Sx DC60SAx
Control Voltage Range 3.5-32 VDC 90-280 Vrms/VDC
Minimum Turn-On Voltage (3) 3.5 VDC 90 Vrms/VDC
Minimum Turn-Off Voltage (4) 1.0 VDC 10 Vrms/DC
Typical Input Current 2.2 mA @ 5 VDC 2 mA @ 120 V, 4 mA @ 240 V
Nominal Input Impedance 1500 Ohm 60K
Maximum Turn-On Time [msec] (5) 0.1 10
Maximum Turn-Off Time [msec] (6) 0.3 40
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input/Output/Base (50/60Hz) [Vrms] 4000
Minimum Insulation Resistance (@ 500 V DC) 109 Ohm
Maximum Capacitance, Input/Output 8 pF
Ambient Operating Temperature Range -30 to 80°C
Ambient Storage Temperature Range -40 to 125 °C
Weight (typical) 3.0 oz (86.5g)
Encapsulation Ther ma lly conductive Epoxy
Terminals Screws and Saddle Clamps Furnished, Unmounted
Recommended Terminal Screw Torque Range: 6-32 Screws - 10 in lbs. 8-32 and 10-32 Screws -20 in. lbs. (Screws dry without grase)
GENERAL NOTES
1) All parameters at 25°C unless otherwise speci f ied.
2) Heat sinkin g required, see derating curves.
3) Minimum turn-on voltage fo r –B, DC control is 1VDC and AC control is 10Vrms/VDC.
4) Minimum turn-off volt age f o r –B, DC control is 3.5VDC and AC control is 90Vrms/VDC.
5) Turn-on time for –B version is 300 µs
6) Turn-off time for –B version is 100 µs.
MECHANICAL SPECIFICATIONS
THERMAL DERATE INFORMATION
WIRING DIAGRAM
AGENCY APPROVALS
Designed in accordance with the requirements of IEC 62314
E116950
Rev. 080812
ANNEX - ENVIROMENTAL INFORMATION