EMI Suppression Filters
(Lead Type EMIFILr)
C30E.pdf
May 9,2016
EU RoHS Compliant
F**2&#.0-"3!21',2&'1!2*-%!-+.*7
5'2&-@
F-'12&#30-.#,'0#!2'4#
|z{{GG-,2&##120'!2'-,-$2&#
1#-$#02',80"-313 12,!#1',
*#!20'!*,"*#!20-,'!/3'.+#,2@
FFor+-0#"#2'*1A.*#1#0#$#r2o-ur
5# 1'2#'Mur21A..roc&$o0-'
H&22.BGG555@+302@!-+G#,-
#3G13..-02G!-+.*',!#G0-&1J@
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Contents
Please check the MURATA website (http://www.murata.com/)
if you cannot find a part number in this catalog.
EMIFILr, EMIGUARDr,
"EMIFIL" and "EMIGUARD" in this catalog are
the trademarks of Murata Manufacturing Co., Ltd.
Product specifications are as of January 2016.
Product Guide / Eective Frequency Range p2
Outline of EMI Suppression Filters (EMIFILr)
for DC Line p3
Ferrite Beads Inductors
Part Numbering p7
BL01/02/03 Series p8
Disc Type EMIFILr
Part Numbering p11
DSS1 Series p12
Heavy-duty Type DSN9H/DST9H Series p14
EMIGUARDr (EMIFILr with Varistor Function)
Part Numbering p16
VFC2H/VFR3V/VFS6V/VFS9V Series p17
Noise Suppression Eect of VFR/VFS Series
p21
Common Mode Choke Coils
Part Numbering p25
PLT09H Series p26
!Caution / Notice p27
Soldering and Mounting p28
Packaging p30
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
2
Product Guide/Eective Frequency Range
Type
Disc Type EMIFILr
Ferrite Bead Inductor
EMIGUARDr
(EMI Filters with varistor functions)
Common Mode Choke Coils
VFR3V
VFS6V/9V
PLT09H
VFC2H
Series
10kHz 100kHz 1MHz 10MHz100MHz 1GHz 10GHz
Eective Frequency Range
BL01/02/03
DSN9H
DSS1
DST9H
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
3
··································p.8–10Ferrite Bead Inductor
Equivalent Circuit
Impedance - Frequency Characteristics (typical)
oFerrite Bead Inductor
o Ferrite Bead Inductors are eective for frequencies
ranging from a few MHz to a few GHz. Ferrite Bead
Inductors are widely used as a low noise countermeasure,
as well as a universal noise suppression component.
o Ferrite Bead Inductors produce a micro inductance in a
low frequency range. At high frequencies, however, the
resistive component of the inductor produces the
primary impedance. When inserted in series in the noise
producing circuit, the resistive impedance of the inductor
prevents noise propagation.
R: Real Part (Resistive Portion) X: Imaginary Part (Inductive Portion)
R(f)
BL01 BL02RN1 BL02RN2 BL03RN2
X
RZ
160
140
120
100
80
60
40
20
0
0.5 1 2 5 10 20 50 100 200 500 1000
Impedance (Ω)
Frequency (MHz)
Outline of EMI Suppression Filters (EMIFILr) for DC Line
Outline
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
4
Disc Type EMIFILr······································p.12–15
DSp9H
oDisc Type EMIFILr
o This capacitor type EMI suppression filter has a large
noise suppression eect at frequencies ranging from a
few MHz to hundreds of MHz. This type of filter is used
widely as a universal, high performance EMI suppression
component.
o Three-terminal construction reduces residual inductance,
thereby substantially improving noise suppression at
frequencies over 10MHz.
Outline of EMI Suppression Filters (EMIFILr) for DC Line
DSS1
Outline
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
5
·············································p.17–24
VFR3V VFS6V
EMIGUARDr
Construction of EMIGUARDr (VFS9V)
Surge Absorption Eect of EMIGUARDr
oEMIGUARDr
VFS9V
o EMIGUARDr eliminates both surge noise and EMI noise
applying some unique design like the use of dielectric
varistor material to a 3 terminal capacitor.
o Eective when high frequency noise and high voltage
surge suppression are required, and also in situations
when surging starts at extremely high speeds. This type
of surging cannot be eliminated with general type
varistors.
Type of Filter
No filter
Three-terminal capacitor is
used to suppress the surge.
EMIGUARDr is used to
suppress the surge. (VFS6V)
Surge Absorption Eect of EMIGUARDr
–1kV
4kV
500V
/div
–100ns 50ns/div 400ns
–1kV
4kV
500V
/div
–100ns 50ns/div 400ns
–1kV
4kV
500V
/div
–100ns 50ns/div 400ns
Varistor
Electrode
Ferrite
Lead
Outline of EMI Suppression Filters (EMIFILr) for DC Line
VFC2H
Outline
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
6
································p.26Common Mode Choke Coil
Construction of Common Mode Choke Coil
Equivalent Circuit
oCommon Mode Choke Coil
o These choke coils reduce common mode noise, which
causes problems on balanced transmission lines, and are
eective against common mode noise in the several MHz
to several 100MHz frequency range.
They are ideally suited for noise suppression on DC power
supply lines and interface cables.
Current of Common Mode (Noise)
Current of Dierential Mode (Signal)
PLT09H
Outline of EMI Suppression Filters (EMIFILr) for DC Line
Outline
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
7
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
(Part Number)
Ferrite Beads Inductors
3Beads Core Material
Code
Standard Type
Beads Core Material
RN
1Product ID
BL Ferrite Beads Inductors
Product ID
2Series
01
02
03
Beads ø3.6
Beads ø3.4
Beads ø2.3 max.
Code Series
5Lead Type
A1
A2
R1
R2
R3
Axial Straight Type
Axial Crimp Type
Radial Straight Type
Radial Straight and Wave Formed Leads Type
Radial Incrimp Type
Code Lead Type
8Packaging
A
B
BL01/BL02/BL03
All Series
Ammo Pack
Bulk
Code Packaging Series
BL01
BL01
BL02/BL03
BL02
BL02
Series
7Lead Diameter
1
2
ø0.60mm
ø0.65mm
Code Lead Diameter
4Numbers of Beads Core
Code
1
2
Numbers of Beads Core
1
2
6Lead Length, Space
A
D
E
F
J
M
N
P
Q
Bulk, Axial Type, 3.7mm
Bulk, Axial Type, 45.0mm
Taping, Axial Type, 26.0mm
Taping, Axial Type, 52.0mm
Bulk, Radial Type, 5.0mm
Bulk, Radial Type, 10.0mm
Taping, Radial Type, 16.5mm
Taping, Radial Type, 18.5mm
Taping, Radial Type, 20.0mm
Code Lead Length, Space Series
5
R1
6
M
1
BL
4
2
3
RN
2
02
7
2
8
B
BL01
BL02/BL03
EMI Suppression Filters (Lead Type EMIFILr)
Ferrite Beads Inductors Part Numbering
Features
BL01/02/03 series are ferrite beads with lead wires to
produce a high frequency loss for suppression of
noise. Simple construction and easy-to-use, effective
for low impedance circuits such as power supplies and
grounds. Effective also for preventing overshoot and
undershoot of digital signal in clocks or the like,
and suppressing the higher harmonic wave. Suitable for
prevention of abnormal oscillation at high frequency
amplifying circuit.
ø3.6±0.15
20 min. 5.0±0.3 20 min.
45 min.
ø0.65
(in mm)
*Coating extending on leads : 1.5 max.
**
BL01RN1A1D2B
ø0.65
10±1.0
3.7±1.0
ø3.6±0.15
5.0±0.3
(in mm)
*Coating extending on leads : 1.5 max.
**
BL01RN1A2A2B
(in mm)
7.5 max. ø3.4±0.2
5.0±0.8 ø0.65
7.5 max.10.0±1.0
15.0 min.
*There is excess bond stick on the wire.
*
*
BL02RN1R2M2B
12.0 max.
15.0 min.
5.0±1.0
5.0±0.8
*There is excess bond stick on the wire.
*
8.0 max. ø3.4±0.2
ø0.65
(in mm)
*
BL02RN1R3J2B
(in mm)
9.0 max. ø3.4±0.2
5.0±0.8
ø0.65
7.5 max.10.0±1.0
15.0 min.
BL02RN2R1M2B
ø0.65
(in mm)
12.0 max.
15.0 min.
5.0±1.0
5.0±0.8
9.0 max. ø3.4±0.2
BL02RN2R3J2B
(in mm)
8.3 max. ø2.3 max.
5.0±0.8 ø0.60
6.5 max.10.0±1.0
15.0 min.
BL03RN2R1M1B
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
8
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr
with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
EMI Suppression Filters (Lead Type EMIFILr)
Ferrite Beads Inductors BL01/02/03 Series
Part Number Rated Current
(A)
Operating
Temperature Range
BL01RN1A1D2B 7 -40 to +85°C
BL01RN1A1E1A 6 -40 to +85°C
BL01RN1A1F1A 6 -40 to +85°C
BL01RN1A2A2B 7 -40 to +85°C
BL02RN1R2M2B 7 -40 to +85°C
BL02RN1R2N1A 6 -40 to +85°C
BL02RN1R2P1A 6 -40 to +85°C
BL02RN1R2Q1A 6 -40 to +85°C
BL02RN1R3J2B 7 -40 to +85°C
BL02RN1R3N1A 6 -40 to +85°C
BL02RN2R1M2B 7 -40 to +85°C
BL02RN2R1N1A 6 -40 to +85°C
BL02RN2R1P1A 6 -40 to +85°C
BL02RN2R1Q1A 6 -40 to +85°C
BL02RN2R3J2B 7 -40 to +85°C
BL02RN2R3N1A 6 -40 to +85°C
BL03RN2R1M1B 6 -40 to +85°C
BL03RN2R1N1A 6 -40 to +85°C
BL03RN2R1P1A 6 -40 to +85°C
BL03RN2R1Q1A 6 -40 to +85°C
Please refer to p.30, "Packaging" for Dimensions of Part Numbers Except for 'B' for the last code.
(Resistance element becomes dominant
at high frequencies.)
Equivalent Circuit
R
X
Z
160
140
120
100
80
60
40
20
0
0.5 1 2 5 10 20 50 100 200 500 1000
Impedance (Ω)
Frequency (MHz)
Impedance - Frequency Characteristics
BL01RN1
X
R
Z
160
140
120
100
80
60
40
20
0
0.5 1 2 5 10 20 50 100 200 500 1000
Impedance (Ω)
Frequency (MHz)
BL02RN1
Continued on the following page.
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
9
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
BL01/BL02/BL03 Series
Continued from the preceding page.
X
RZ
160
140
120
100
80
60
40
20
0
0.5 1 2 5 10 20 50 100 200 500 1000
Impedance (Ω)
Frequency (MHz)
Impedance - Frequency Characteristics
BL02RN2
160
140
120
100
80
60
40
20
00.5 1 2 5 10 20 50 100 200 500 1000
X
R
Z
Impedance (Ω)
Frequency (MHz)
BL03RN2
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
10
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr
with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
11
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
(Part Number)
Disc Type EMIFILr
3Style
Code
Expressed by a letter.
Style
1
9
1Product ID
DS Three-terminal Capacitor
Product ID
2Structure
N
S
T
No Ferrite Beads Type
Built-in Ferrite Beads Type
with Ferrite Beads Type
Code Structure
5Temperature Characteristics
B3 ±10% (Temperature Range: -25˚C to +85˚C)
Code Capacitance Change
8Lead Type/9Packaging
Q55B
Q50B
Q91A
Q92A
Q93A
All series
DSp9H
DST9H
DSN9H, DSS1N
25.0 min.
4.0±0.5
20.0±1.0
16.5±1.0
18.5±1.0
Code Lead Length* (mm)
Bulk
Ammo Pack
Packaging
Straight
Lead Type Series
6Rated Voltage
1H
2A
2E
50V
100V
250V
Code Rated Voltage
4Category
Code
for General Use
for Heavy-duty
Category
N
H
7Capacitance
Expressed by three alphanumerics. The unit is in pico-farad (pF).
The first and second figures are significant digits, and the third
figure expresses the number of zeros that follow the two figures.
5
B3
6
2E
1
DS
7
101
4
H
3
9A
9
2
N
8
Q92
*Lead Distance between Reference and Bottom Planes Except for Bulk.
EMI Suppression Filters (Lead Type EMIFILr)
Disc Type EMIFILr Part Numbering
(in mm)
8.5 max. 3.5 max.
ø0.56
5.0
2.5±0.5
25.0 min.
7.5 max.
+0.8
-
0.2
DSS1_Q55B Series
Part Number Capacitance
(pF)
Rated Voltage
(Vdc)
Rated Current
(A) Operating Temperature Range
DSS1NB32A220 22 ±10% 100 6 -40 to +85°C
DSS1NB32A330 33 ±10% 100 6 -40 to +85°C
DSS1NB32A470 47 ±10% 100 6 -40 to +85°C
DSS1NB32A680 68 ±10% 100 6 -40 to +85°C
DSS1NB32A101 100 ±10% 100 6 -40 to +85°C
DSS1NB32A121 120 ±10% 100 6 -40 to +85°C
DSS1NB32A151 150 ±10% 100 6 -40 to +85°C
DSS1NB32A221 220 ±10% 100 6 -40 to +85°C
DSS1NB32A271 270 ±10% 100 6 -40 to +85°C
DSS1NB32A331 330 ±10% 100 6 -40 to +85°C
DSS1NB32A471 470 ±10% 100 6 -40 to +85°C
DSS1NB32A681 680 ±10% 100 6 -40 to +85°C
DSS1NB32A102 1000 ±10% 100 6 -40 to +85°C
DSS1NB32A152 1500 ±10% 100 6 -40 to +85°C
DSS1NB32A222 2200 ±10% 100 6 -40 to +85°C
DSS1NB32A332 3300 ±10% 100 6 -40 to +85°C
DSS1NB32A472 4700 ±10% 100 6 -40 to +85°C
DSS1NB32A682 6800 ±10% 100 6 -40 to +85°C
DSS1NB32A103 10000 ±10% 100 6 -40 to +85°C
DSS1NB32A153 15000 ±10% 100 6 -40 to +85°C
DSS1NB32A223 22000 ±10% 100 6 -40 to +85°C
DSS1NB31H333 33000 ±10% 50 6 -40 to +85°C
DSS1NB31H473 47000 ±10% 50 6 -40 to +85°C
DSS1NB31H104 100000 ±10% 50 6 -40 to +85°C
Please refer to Part Numbering for Type and Length of Lead.
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
12
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr
with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
Features
DSS1 series is a compact, high performance
lead type 3 terminal capacitor which can be
mounted in 2.54mm pitch.
Its three terminal structure enables nice
high frequency performance.
Wide capacitance variation enables flexible
selection for various noise frequencies.
High speed mounting is available with automatic
insertion machine.
EMI Suppression Filters (Lead Type EMIFILr)
Disc Type EMIFILr DSS1 Series
Built-in Ferrite Beads DSS1 Series
GND
No Polarity.
Equivalent Circuit
0
20
40
60
80 1 10 100 10000.1
Frequency (MHz)
Insertion Loss (dB)
22pF
33pF
47pF
68pF
100pF
120pF
150pF
220pF
270pF
330pF
470pF
680pF
1000pF
1500pF
2200pF 3300pF
4700pF
6800pF
10000pF
15000pF
22000pF
33000pF
47000pF
100000pF
Insertion Loss Characteristics
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
13
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
Features
DS_9H is a basic type EMI suppression filter which can
obtain high insertion loss in a wide frequency range.
Its three terminal structure enables nice high
frequency performance. High rated voltage of 250Vdc
and wide operating temperature range from -40 degrees C
to 105 degrees C are suitable for high reliability
circuits.
Supplement
Diameter of lead is 0.6mm for taping type.
Taping type is three terminal in-line arrangement.
(in mm)
4.0max
9.5max
1.0±0.5
10.0max25.0min
1.5max
5.0±0.5
2.5±0.5
ø0.65
DSN9H_Q55B
(in mm)
4.0 max.
9.5 max.
GND Q55 Type: I= 25.0 min.
Q50 Type: I1= 4.0±0.5
1.25±0.5
15.5 max.
I
I1
1.5 max.
5.0±0.5
2.5±0.5
ø0.65
Ferrite bead
DST9H_Q55B
Part Number Capacitance
(pF)
Rated Voltage
(Vdc)
Rated Current
(A) Operating Temperature Range
DSN9HB32E220 22 ±20% 250 6 -40 to +105°C
DSN9HB32E101 100 ±20% 250 6 -40 to +105°C
DSN9HB32E271 270 ±20% 250 6 -40 to +105°C
DSN9HB32E222 2200 ±20% 250 6 -40 to +105°C
Please refer to Part Numbering for Type and Length of Lead.
GND
No Polarity.
Equivalent Circuit
0.1 1 10 100 1000
0
20
40
60
80
100
120
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
22pF
100pF
2200pF
270pF
Insertion Loss Characteristics
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
14
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr
with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
EMI Suppression Filters (Lead Type EMIFILr)
Disc Type EMIFILr Heavy-duty Type DSN9H/DST9H Series
DSN9H Series
Part Number Capacitance
(pF)
Rated Voltage
(Vdc)
Rated Current
(A) Operating Temperature Range
DST9HB32E220 22 ±20% 250 6 -40 to +105°C
DST9HB32E101 100 ±20% 250 6 -40 to +105°C
DST9HB32E271 270 ±20% 250 6 -40 to +105°C
DST9HB32E222 2200 ±20% 250 6 -40 to +105°C
Please refer to Part Numbering for Type and Length of Lead.
GND
No Polarity.
Equivalent Circuit
0.1 1 10 100 1000
0
20
40
60
80
100
120
Frequency (MHz)
Insertion Loss (dB)
22pF
100pF
2200pF
270pF
(50Ω - 50Ω)
Insertion Loss Characteristics
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
15
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
With Ferrite Beads DST9H Series
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
16
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr
with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
(Part Number)
EMIGUARDr (EMIFILr with Varistor Function)
1Product ID
VF EMIGUARDr Lead Type
Product ID
2Structure
S
R
C
Built-in Ferrite Beads Type
with Resistance
Built-in Capacitor
Code Structure
7Capacitance
Expressed by three alphanumerics. The unit is in pico-farad (pF).
The first and second figures are significant digits, and the third
figure expresses the number of zeros that follow the two figures.
6Rated Voltage
1B
1D
1E
12V
22V
25V
Code Rated Voltage
4Features
Code
with Varistor Function
with Varistor Function (for Automotive)
Features
V
H
5Temperature Characteristics
Code
+20/-30% (Temperature Range: -40˚C to +105˚C)
+20/-30% (Temperature Range: -25˚C to +85˚C)
±15% (Temperature Range: -55˚C to +125˚C)
Capacitance Change
D8
D3
R7
:Lead Type/;Packaging
T51B
U31A
Q55B
Q91J
Q92J
Q93J
VFS9
VFR3/VFS6Incrimp
Straight
Code Lead Type
25.0mm min.
18.5±1.0mm
25.0mm min.
20.0±1.0mm
16.5±1.0mm
18.5±1.0mm
Lead Length*
Bulk
Ammo Pack
Bulk
Paper Reel (ø320mm)
Packaging Series
3Style
2
3
6
9
Size is expressed by a digit
Code Style
*Lead Distance between Reference and Bottom Planes Except for Bulk.
K1B
M1A
M1J
VFC2Inside Crimp
Code Lead Type
26.0±1.0mm
18.0±1.0mm
Lead Length*
Bulk
Ammo Pack
Paper Reel (ø320mm)
Packaging Series
*From bottom of the crimp.
5
R7
6
1D
1
VF
4
H
3
2
2
C
7
105
89
2K
:
T51
;
B
CapacitanceCode
K±10%
8Capacitance
Varistor VoltageCode
227V
9Varistor Voltage
5
D8
6
1E
1
VF
4
V
3
6
2
S
7
221
:
T51
;
B
EMI Suppression Filters (Lead Type EMIFILr)
EMIGUARDr (EMIFILr with Varistor Function) Part Numbering
(in mm)
5.0 max.
5.2±0.5
3.0 max.
6.0 max.26.0±1.0
4.0 max.
2
(1)
1
(2)
VFC2H Series
Please refer to Part Numbering for Type and Length of Lead.
Equivalent Circuit
VFC2H series is EMI suppression filters of lead type
that combines the varistor and capacitor.
Features
1. Suitable for absorbing surge voltages occurred from
inductive load of motors, relays, etc.
2. High maximum energy
3. Smaller size, High capacitance
4. Taping is capable of fast implementation of
automatic insertion.
Part Number Varistor Voltage
(Vdc)
Capacitance
(µF)
Temperature
Characteristics
Rated Voltage
(Vdc) Rated Current
Insulation
Resistance (min.)
(M ohm)
Operating
Temperature Range
VFC2HR71D105K2 27 +5/-3V 1.0 ±10% R7 (±15%) 22 - 1 -55 to 125°C
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
17
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
EMI Suppression Filters (Lead Type EMIFILr)
EMIGUARDr (EMIFILr with Varistor Function) VFC2H/VFR3V/VFS6V/VFS9V Series
VFC2H Series
Features
VFR3V series is designed for ESD surge protection
of IC. It efficiently absorbs ESD surges rushed into
IC's I/O terminal.
Applications
Elimination of noise and protection of semiconductors
in office equipment, including computers and
peripheral equipment, copy machines, and communication
terminals. (in mm)
No.1 Pin Indicator
(Surge entrance side)
5.0±0.5
2.5±0.5
8.0 max.
(1) (3)(2)
25.0 min.
ø0.45±0.1
5.0 max.
2.3 max.
VFR3V Series
Please refer to Part Numbering for Type and Length of Lead.
0
10
30
40
50
70 5 10 100 1000
20
60
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
Insertion Loss Characteristics
Part Number Varistor Voltage
(Vdc)
Capacitance
(pF)
Rated Voltage
(Vdc)
Rated Current
(mA)
Peak
Pulse Current
(A)
Operating
Temperature Range
VFR3VD31E131 50 ±20% 130 ±20% 25 20 30 -25 to 85°C
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
18
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr
with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
Semiconductor Protection VFR3V Series
Features
VFS6V series is designed for surge protection of
signal line. It protects electric circuit from surges
such as static electricity and suppresses EMI noise.
Built-in ferrite bead gives excellent EMI suppression.
Applications
Elimination of noise and protection of electric
circuits in office equipment, including computers and
peripheral equipment, copy machines, and
communication terminals.
(in mm)
8.0 max. 2.54 max.
5.0±0.5
2.5±0.5
25.0 min.
ø0.6
10.5 max.
GND
*2
*1
*1 The bottom of the ferrite beads may not be level
with each other.
*2 There may be a hole on the top of ferrite beads,
which causes no characteristics deterioration.
VFS6V Series
Please refer to Part Numbering for Type and Length of Lead.
GND
No Polarity
Equivalent Circuit
0
20
40
60 100.010.0 1000.0
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
Insertion Loss Characteristics
Part Number Varistor Voltage
(Vdc)
Capacitance
(pF)
Rated Voltage
(Vdc)
Rated Current
(A)
Peak
Pulse Current
(A)
Operating
Temperature Range
VFS6VD81E221 50 ±20% 220 ±20% 25 6 100 -40 to 105°C
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
19
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
Signal Line VFS6V Series
(in mm)
7.5 max.12.0 max.
GND
2.5±0.5
10.5 max.25.0 min.
5.0±0.5
2.5±0.5
ø0.65
Ferrite bead
*1
1.5 max.
*2
*1 Coating extending on leads does not exceed the tangent line.
Exposed electrode, if any, is covered by solder, etc.
*2 If there is a hole in the top of the filter, the ferrite bead should not
be exposed.
VFS9V Series
Part Number Varistor Voltage
(Vdc)
Capacitance
(pF)
Rated Voltage
(Vdc)
Rated Current
(A)
Operating
Temperature Range
VFS9VD31B223 22 ±20% 22000 +50/-20% 12 7 -40 to 100°C
Rated current is 7A for bulk type and 6A for taping type.
Rated current of taping type is 6A because the diameter of the lead is 0.6mm and its lead layout is the in-line type.
Please refer to Part Numbering for Type and Length of Lead.
GND
No Polarity
Equivalent Circuit
0
20
40
60
80
100
0.1 0.5 5 50 5001 10 100 1000
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
Insertion Loss Characteristics
Voltage (V)
Current (mA)
0
–20–30
–40
300
200
100
–100
–200
–300
10 30 4020
–10
Voltage - Current Characteristics
Features
VFS9V series is designed for surge protection of
the power supply. It protects electric circuits from
surge such as static electricity and suppresses EMI
noise. Its large capacitance value enables high
insertion loss for EMI noise.
Applications
For circuit protection and noise suppression in
electronics equipment such as computers and DC motors,
and in electronics systems installed in cars such as
car audio equipment and engine controllers.
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
20
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr
with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
Large Current VFS9V Series
Noise Suppression Effect of VFR/VFS Series
Type of Filter
Before Countermeasures
(No Filters)
Using VFR3VD31E131T51
EMI Suppression Eect
Test Circuit
Example of EMI Suppression Eect Test Circuit
o Testing Method
1. Put ESD surge to IC (7404 family) input terminal with
ESD simulator based on IEC 801-2.
2. Check IC's operation.
3. If IC's operation is normal, increase ESD voltage in 1kV
steps.
4. Continue above steps 1 to 3 till IC's operation becomes
abnormal.
o Result
Varistor VFR3V can protect IC from ESD.
0LS ALS
Without VFR3V
Breakdown level
[kV]
(Result)
With use VFR3V
AS C
IC’s Family
HC AC
5
10
15
20
25
30 min.
330Ω
VFR3V
ESD Simulator
Test IC
150pF
Noise Radiation Cable (50cm)
ANT
Signal
1MHz
ACO4
Shield
F
20
30 90 150 210 270 330
30
40
50
60
70
Noise Level (dBμV/m)
Frequency (MHz)
20
30 90 150 210 270 330
30
40
50
60
70
Noise Level (dBμV/m)
Frequency (MHz)
Example of IC Protection (VFR3V)
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
21
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
Noise Suppression Effect of VFR/VFS Series
Features (VFS9V)
Pulse-Voltage Breakdown Characteristic (VFS9V)
Items
Overload
Test methods Rated values
1.4 times the varistor voltage (V1) is applied for 5 minutes at room
temperature.
At a temperature of 85±3°C, the varistor voltage V1 is continuously
applied to the sample for 1000 to 1024 hours.
Then it is le at room temperature, for 4 to 24 hours before measuring.
Surge Test (1)
At room temperature, Surges are applied
105 times every 2 seconds. Then aer 1 or 2
hours, the sample is measured.
Surge Test (2)
High
Temperature
Load
At room temperature, the capacitor
"C" is charged with 70V, then discharged to
apply the voltage to the sample. Tested once
(resuming JASO A-1).
400V
0.47μF
70V
0.8Ω
2Ω
C
C=110mF
Items Specifications
Rated Capacitance Change
Insulation Resistance
Rated of Change
in Varistor Voltage V1*
Voltage Rate
Within±15%
500kΩ min.
Within±15%
1.30 max.
*V1: Voltage when 1mA is applied
50Ω
50Ω
V
800ns
Residual ratio
when 1000 pulses
are applied
VFS9V EMIGUARDr use a self healing varistor- capacitor,
so that it can be used under a 500 to 600V surge that
would break conventional disc type EMI filters. As shown in
the figure below EMIGUARDr withstands 2000V impulses
applied 1000 times.
Temperature Characteristics of
Varistor Voltage - Insulation Resistance (VFS9V)
100
0
0 1000500
Pulse Voltage Applied (V)
Residual Rate (%)
VFS9V
1500 2000
50
Capacitance: 0.022μF
with varistor function
3-terminal capacitor
Capacitance: 0.022μF
with no varistor
function
–10
0
+10
104
103
–30 0 30 60 90
Temperature (°C)
Insulation Resistance (MΩ)
Insulation
resistance
Change rate of
varistor voltage
102
10
1
Change Rate of Varistor Voltage (%)
Continued on the following page.
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
22
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr
with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
Noise Suppression Effect of VFR/VFS Series
Noise Absorption Eect of EMIGUARDr (VFS9V)
Type of Filter
without EMIGUARDr
EMI Suppression Eect Description
Waveform when EMIGUARDr is not
used.
(Surge from a noise simulator.)
Waveform aer the noise passed
through EMIGUARDr. Little noise is
recorded.
with EMIGUARDr
D
223S
12-22
100
: 200V/div
: 10ns/div
90
80
20
10
0%
100
: 200V/div
: 10ns/div
90
80
20
10
0%
Comparative Data (VFS9V)
Type of Filter
Without Filters
Conventional varistor
VFS9V
Two-terminal capacitor
(with varistor function)
EMI Suppression Eect Description
As with the two-terminal capacitor
The two-terminal capacitor is
influenced by lead line inductance,
leaving behind some of the rising and
falling edges.
The residual noise can cause the
system to malfunction.
The three-terminal structure eliminates
most of the lead line inductance. This
allows VFS9V to completely absorb the
rising and falling edges of the applied
pulses.
100
90
80
20
10
0%
100
90
80
20
10
0%
100
90
80
20
10
0%
Noise wave applied
1. Absorption of quick-rising, high-frequency noise (10ns/div, 100V/div)
2000V
50ns
Continued from the preceding page.
Continued on the following page.
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
23
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
Noise Suppression Effect of VFR/VFS Series
Type of Filter
Without Filters
Two-terminal capacitor
VFS9V
Three-terminal capacitor
(with ferrite bead)
EMI Suppression Eect Description
In capacitors the voltage of the residual
surge (1300V) is higher than that of the
above example. The wave height is
almost the same as the original.
Conventional EMI filters do not work for
wide-pulse noise because the
capacitors are saturated. In this
example, the residual 1200V surge can
cause the system to break down.
Bypassing the high voltage to the
ground suppresses the voltage.
2. Absorption of wide-pulse noise (50ns/div, 200V/div)
Noise wave applied
100
90
80
20
10
0%
100
90
80
20
10
0%
100
90
80
20
10
0%
1300V
200ns
Continued from the preceding page.
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
24
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr
with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
25
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
(Part Number)
Common Mode Choke Coils
3Applications
Code
for DC Line High-frequency Type
Applications
09H
1Product ID
PL Common Mode Choke Coils
Product ID
2Type
TDC Type
Code Type
9Packaging
BAll seriesBulk
Code Packaging Series
7Winding Mode
PAligned Winding Type
Code Winding Mode
6Rated Current
Expressed by three-digit alphanumerics. The unit is in amperes
(A). A decimal point is expressed by the capital letter "R". In this
case, all figures are significant digits.
8Lead Dimensions
15mm
Code Lead Dimensions
Code
General Use
Features
N
4Features
5Inductance
Expressed by three figures. The unit is micro-henry (μH). The first
and second figures are significant digits, and the third figure
expresses the number of zeros that follow the two figures.
5
200
4
N
6
3R0
1
PL
3
09H
2
T
7
P
8
1
9
B
EMI Suppression Filters (Lead Type EMIFILr)
Common Mode Choke Coils Part Numbering
PLT09H series is a common mode choke coil for DC
lines. It is effective against the common mode noise
that can cause radiative noise in power supply lines
and interface lines. The additional normal mode
inductance enables high suppression effect to
radiation noise.
Features
1. This is a wide frequency range type, applicable in
applications ranging from a few MHz to several
100MHz.
2. It features a low-profile design.
Applications
1. Noise suppression of SW power supply, DC-DC converter
2. DC power lines in AC adapter of Portable equipment
(in mm)
14 max.
5±0.5 Soldered 10±0.5
5±1 8 max.
13 max.
ø0.6 max.
(1) (2)
(
4
)(
3
)
PLT09H Series
Part Number Rated Current
(A)
Rated Voltage
(Vdc)
Withstand Voltage
(Vdc)
Common Mode Inductance
(µH)
PLT09HN2003R0P1 3 50 125 20 min.
Operating Temperature Range: -40 to +85°C
(1) (2)
(4) (3)
No polarity.
Equivalent Circuit
15
0
5
10
20
25
30 0.1 1 10 100 1000
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
Insertion Loss Characteristics
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
26
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr
with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
EMI Suppression Filters (Lead Type EMIFILr)
Common Mode Choke Coils (for DC Line) PLT09H Series
!Caution/Notice
o Rating
Do not use products beyond the rated current and rated voltage as this
may create excessive heat and deteriorate the insulation resistance.
o Soldering and Mounting
1. Mounting holes should be designed as specified in these
specifications. Other designs than those shown in these
specifications may cause cracks in ceramics that may
lead to smoking or firing.
2. DSN9H/DST9H/VFS9V Series
Mounting for PCB. (Applis only to bulk type.)
The form of the mounting hole of the bulk item is a triangle.
The product should be inserted and soldered to each hole in
the correct way as in Fig.1. (The center terminal and the other
terminals become parallel when viewing the product from the
side.) Smoking and firing maybe caused by incorrect mounting
as in Fig.2. (The center terminal and the other terminals cross
when viewing the product from the side.)
o Storage and Operating Conditions
o Soldering and Mounting
<Operating Environment>
1. Do not use products in a chemical atmosphere such
as chlorine gas, acid or sulfide gas.
2. Do not use products near water, oil or organic
solvents. Avoid environments where dust or dirt may
adhere to the product.
<Storage and Handling Requirements>
1. Storage Period
Use the products within 12 months aer delivery.
Solderability should be checked if this period is
exceeded.
2. Storage Conditions
(1) Storage temperature: -10 to 40 degrees C
Relative humidity: 15 to 85%
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.
(3) When restoring taping type (BL01RN1A1F1J),
please attach the spacer between the flanges of the
reel. The spacer is corrugated paper that is attached
when shipping.
1. Washing
Failure and degradation of a product are caused
by the washing method. When you wash in conditions
that are not in the mounting information, please contact
Murata engineering.
2. Soldering
Reliability decreases with improper soldering
methods. Please solder by the standard soldering
conditions shown in the mounting information.
3. Other
Noise suppression levels resulting from Murata's
EMI suppression filters EMIFILr may vary, depending
on the circuits and ICs used, type of noise, mounting
pattern, lead wire length, mounting location, and other
operating conditions. Be sure to check and confirm in
advance the noise suppression eect of each filter, in
actual circuits, etc. before applying the filter in a
commercial-purpose equipment design.
1. Terminal (with mark) should be properly connected to
the line of incoming electrostatic surge. (There is
polarity.) Otherwise, no eect in ESD suppression can
be expected (VFR3V).
2. Products should be used at rated voltage or less and
rated current or less.
3. Products should not be applied for the absorption of
surges that have large energy (e.g., induced lightning
surges, switching surges) because it is designed for the
absorption of electrostatic surges (VFR3V).
4. Electrostatic testing should be done on the following
conditions (VFR3V).
<Using EMIGUARDr eectively>
,FKGF
2
]
2
< 8.0 x10
5
n: Times applied
C: Charging Capacitance (pF)
V: Testing Voltage (kV)
R: Charging Resistance (Ω)
Incoming
Electrostatic Surges
Incoming
Electrostatic Surges
Example of input terminal Example of output terminal
Fig.1 Right Way Fig.2 Wrong Way
Marking Side
Center Terminal
(Ground Terminal)
!Caution
Notice
3. Take care not to apply any mechanical stress to
product body at the lead terminal bending process for
product angle adjustment aer insertion.
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
27
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
Soldering and Mounting
1. Mounting Hole
Mounting holes should be designed as specified below.
VFR3V
VFS6V
DSS1
DSN9H
DST9H
VFS9V
Part Number Bulk Type (in mm) Taping Type (in mm)
2.5±0.2 2.5±0.2
ø0.8-3
ø1.0-3
ø0.8-3
ø0.8-3
2.5±0.2 2.5±0.2
1.0±0.2
1.25±0.2
2.5±0.2 2.5±0.2
2.5±0.2 2.5±0.2
2.5±0.2 2.5±0.2
2.5±0.2
ø0.8-3
(1) Use Sn-3.0Ag-0.5Cu solder.
(2) Use Rosin-based flux. Do not use strong acidic flux with
halide content exceeding 0.2wt% (chlorine conversion
value).
(3) Products and the leads should not be subjected to any
mechanical stress during the soldering process, or while
subjected to the equivalent high temperatures.
(4) Standard flow soldering profile.
2. Soldering
Solder
Soldering Temperature
Soldering Time
Sn-3.0Ag-0.5Cu solder 250 to 260°C 4 to 6s
Pre-heating
Soldering
Gradual cooling
(in air)
150°C
300
250
200
150
100
50
Temperature (°C)
60s min. Soldering time
Soldering temperature
VFC2H
5.2±0.4
ø0.8-2
5.2±0.4
ø1.0-2
Continued on the following page.
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
28
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr
with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
Soldering and Mounting
Do not clean VFR3V, PLT09H and VFS6V series.
Clean other parts in the following conditions.
(1) Cleaning temperature should be limited to 60°C max.
(40°C max for alcohol type cleaner).
(2) Ultrasonic cleaning should comply with the following
conditions, avoiding the resonance phenomenon at the
mounted products and PCB.
Power: 20 W /Rmax. Frequency: 28 to 40kHz
Time: 5 min. max.
(3) Cleaner
(a) Alcohol type cleaner
Isopropyl alcohol (IPA)
(b) Aqueous agent (PLT series cannot be cleaned)
PINE ALPHA ST-100S
(4) There should be no residual flux or residual cleaner le
aer cleaning.
In the case of using aqueous agent, products should be
dried completely aer rinsing with de-ionized water in
order to remove the cleaner.
(5) The surface of products may become dirty aer cleaning,
but there is no deterioration on mechanical, electrical
characteristics and reliability.
(6) Other cleaning: Please contact us.
3. Cleaning Conditions
Continued from the preceding page.
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
29
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
Packaging
BL01RN_A
BL02RN1R3N1A
BL02RN2R3N1A
BL02RN1R2p1A
BL02RN2R1p1A
BL03RN2R1p1A
(in mm)
Minimum Quantity (Pcs.)
Bulk
BL01RN
BL02RN
BL03RN
Series
500
500
1000
Ammo Pack
1000
1500
2000
ø320mm Paper Reel
2000
—
—
Symbol
Pitch of component
Pitch of sprocket hole
Lead spacing
Hole center to lead
Hole center to component center
Oset of bead
Carrier tape width
Position of sprocket hole
Lead length between sprocket
hole and forming position
Protruding length
Diameter of sprocket hole
Lead Diameter
Total tape thickness
Deviation across tape, Deviation across tape rear
Cutting position of failure
Hold down tape width
Hold down tape position
Description
P
P0
F
P1
P2
ΔS
W
W1
H1
I
D0
ød
t
Δh1, Δh2
L
W0
W2
Dimension (mm)
12.7
12.7±0.2
5.0
3.85±0.7
6.35±1.3
±1.0
18.0±0.5
9.0 0.0
+0.5 to –1.0
ø4.0±0.1
ø0.60
0.7±0.2
1.0 max.
11.0 0.0
12.0±0.5
1.5±1.5
Remarks
Product inclination ΔS determines tolerance
Tape deviation in feeding direction
Including the oset caused by lead bend
Tape with deviation
BL02, BL03
BL02RN1R2/2R1, BL03
BL02, BL03
Including bonding tape thickness
0 max.
0.8 max. L1 L2
*L
| L1 - L2 | <
=1.5
6.0±1.0
0.8 max.
3.2 min.
5±0.5
ø0.60±0.05
5±0.3
ø3.6
±0.15
1.2 max.
Direction of feed
*L BL01RN1A1F1A : 52+2/-1
BL01RN1A1E1A : 26+1.5/-0
ΔS
*There is excess bond stick on the wire.
t
Δh1Δh2
D0
*
3.4±0.2
P0
ød
H1
W0
W2
W
W1
7.5 max.
P
7.5 max.
I
P2
FP1
L
3.4±0.2
ød
*There is excess bond stick on the wire.
t
Δh1Δh2
D0
*
ΔS
P0
H1
W0
W2
W1
W
8.0 max.
P
12.0 max.
I
P2
F
P1
L
ΔS
t
Δh1Δh2
D0
3.4±0.2
P0
ød
H1
W0
W2
W
W1
9.0 max.
P
7.5 max.
I
P2
FP1
L
3.4±0.2
ød
t
Δh1Δh2
D0
ΔS
P0
H1
W0
W2
W1
W
9.0 max.
P
12.0 max.
I
P2
F
P1
L
ΔS
t
Δh1Δh2
D0
2.3 max.
P0
ød
H1
W0
W2
W
W1
8.3 max.
P
6.5 max.
I
P2
FP1
L
+0.8
-
0.2
+0
-
0.5
+0
-
1.0
Lead Length Number : N
Lead Length Number : Q
Lead Length Number : P
16.5±0.5
20.0±0.5
18.5±0.5
Taping Dimensions
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
30
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr
with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
Packaging
Minimum Quantity Lead Type Code
Minimum Order Quantity (order in sets only) (pcs.)
VFR3V Series
VFS6V Series
DSN9H Series
VFS9V Series
VFC2H Series
DSS1 Series
Part Number Ammo Pack Bulk (Bag)
2000 250
2000 250 T51
250 Q55
2000
—
ø320mm
Paper Reel
—
—
—
800 200
2000 2000 500
1500 1500 250
Lead Length (H)
Q91 20.0±1.0mm
Q92 16.5±1.0mm
Lead Type Code
Straight Type
Incrimp Type
-
-
Q93 18.5±1.0mmU31
DSN9H_Q91/Q92/Q93
VFS9V_Q91/Q92/Q93
DST9H_Q92/Q93
DSS1_Q91
VFS6V_U31
Taping Dimensions
(in mm)
Lead Length
(from bottom of the crimp)
26.0±1.0mm
18.0±1.0mm
Inside Crimp
Lead Type Code
K1B
M1A
6.35±1.3 12.7
DSN9_ : 9.5 max.
0±1.0
3.85±0.7
18.0±0.5
9.0+0/-0.5
12.7±0.2
ø4.0±0.1
2.5+0.4/-0.2
0.7±0.2
1.5 max.
1.5±1.5
DSN9_ : 11.0 max.
H
Q91 Type : 20±1.0
Q92 Type : 16.5±1.0
Q93 Type : 18.5±1.0
H
12.0±0.5
+0.5 to -1.0
ø0.6
1.0 max. 1.0 max.
5.0+0.8/-0.2
11.0+0/-1.0
0.7±0.2
1.5 max.
12.7±0.2
ø4.0±0.1
3.85±0.7
12.7 9.5 max. 0±1.0
1.5±1.5
15.5 max.
4.0 max.
1.0 max. 1.0 max.
ø0.6
2.5+0.4/-0.2
6.35±1.3
5.0+0.8/-0.2 2.5+0.4/-0.2
11.0+0/-1.0
18.0±0.5
9.0+0/-0.5
12.0±0.5
+0.5 to -1.0
H
Q92 Type : 16.5±1.0
Q93 Type : 18.5±1.0
H
6.35±1.3 12.7
8.0 max
0±1.0
18.0±0.5
9.0+0/-0.5
ø4.0±0.1
0.7±0.2
1.5 max.
1.5±1.5
3.85±0.7
1.0 max. 1.0 max.
2.54 max.
ø0.6
12.0±0.5
11.0+0/-1.0
5.0+0.8/-0.2
12.7±0.2
2.5+0.4/-0.2
2.5+0.4/-0.2
+0.5 to -1.0
H
U31 Type : 18.5±1.0
HVFS6V : 10.5 max.
*2
*1
*1 The bottom of the dielectric may be exposed.
*2 If a hole is on the top of the ferrite bead, the bead should not be exposed.
DSN9_ : 4.0 max.
ø4.0±0.1
0.7±0.2
1.5 max.
18.0±0.5
9.0+0/-0.5
3.85±0.7
2.5+0.4/-0.2
1.5±1.5
12.0±0.5
+0.5 to -1.0
12.0 max. 0±1.0
11.0 max.
1.0 max. 1.0 max.
*1
Point A
7.5 max.
ø0.6
11.0+0/-1.0
6.35±1.3 12.7
5.0+0.8/-0.2
12.7±0.2
2.5+0.4/-0.2
H
Q91 Type : 20±1.0
Q92 Type : 16.5±1.0
Q93 Type : 18.5±1.0
*2 H
*2 H
*1 Coating extending on leads does not exceed the start of the bend (point A).
Exposed electrodes are covered with solder.
*2 H: to be measured from the forming point A.
*3 The deviation between two ferrite beads should be less than 1.2mm.
*3
18.0±0.5
12.7±0.2
12.76.35±1.3
3.85±0.7
1.5 max. 0.7±0.2
*1 The bottom of the dielectric may be exposed.
*2 If a hole is on the top of the ferrite bead, the bead should not be exposed.
ø0.6
3.5 max.
9.0+0/-0.5
11.0+0/-1.0
1.5±1.5
+0.5 to -1.0
ø4.0±0.1
12.0±0.5
20.0±1.0
7.5 max.
0±1.0
5.0+0.8/-0.2
2.5+0.4/-0.2
8.0 max.
1.0 max.
*2
*1
1.0 max.
VFR3V_U31
6.35±1.3 12.7
8.0 max.
0±1.0
18.0±0.5
9.0+0/-0.5
ø4.0±0.1
18.5±1.0
1.5 max.
0.7±0.2
1.5±1.5
5.0 max.
3.85±0.7
1.0 max. 1.0 max.
2.3 max.
ø0.45±0.1
12.0±0.5
AY AYAY
11.0+0/-1.0
12.7±0.2
5.0+0.8/-0.2 2.5+0.4/-0.2
2.5+0.4/-0.2
+0.5 to -1.0
(1)(2)(3)
Continued on the following page.
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
31
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
Packaging
VFC2H_M1
Taping Dimensions
(in mm)
11.0+0/-1.0
9.0+0/-0.5
18.0±0.5
12.0±0.5
18.0±1.0
+0.5 to -1.0
12.7±0.2
0±1.0
ø4.0±0.1
3.0 max.
ø0.48
1.0 max. 1.0 max.
5.0 max.
5.0+0.8/-0.2
12.7
1
(2)
2
(1)
6.35±1.3
3.85±0.7
1.5 max.
0.6±0.3 1.5±1.5
Continued from the preceding page.
C30E.pdf
May 9,2016
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
32
Ferrite Beads InductorsDisc Type EMIFILr
EMIGUARDr
(EMIFILr
with Varistor Function)
Common Mode Choke Coils
!Caution / NoticeSoldering and MountingPackaging
Murata Manufacturing Co., Ltd.
www.murata.com
Note
1 Export Control
For customers outside Japan:
No Murata products should be used or
sold, through any channels, for use in the
design, development, production, utilization,
maintenance or operation of, or otherwise
contribution to (1) any weapons (Weapons of
Mass Destruction [nuclear, chemical or biological
weapons or missiles] or conventional weapons)
or (2) goods or systems specially designed or
intended for military end-use or utilization by
military end-users.
For customers in Japan:
For products which are controlled items subject
to the “Foreign Exchange and Foreign Trade Law”
of Japan, the export license specifi ed by the law
is required for export.
2 Please contact our sales representatives or
product engineers before using the products in
this catalog for the applications listed below,
which require especially high reliability for the
prevention of defects which might directly
damage a third party’s life, body or property, or
when one of our products is intended for use
in applications other than those specified in
this catalog.
1 Aircra equipment
2 Aerospace equipment
3 Undersea equipment
4 Power plant equipment
5 Medical equipment
6 Transportation equipment (vehicles, trains,
ships, etc.)
7 Tra c signal equipment
8 Disaster prevention / crime prevention
equipment
9 Data-processing equipment
10 Application of similar complexity and/or
reliability requirements to the applications
listed above
3 Product specifi cations in this catalog are as of
January 2016. They are subject to change or
our products in it may be discontinued without
advance notice. Please check with our sales
representatives or product engineers before
ordering. If there are any questions, please contact
our sales representatives or product engineers.
4 Please read rating and CAUTION (for storage,
operating, rating, soldering, mounting and
handling) in this catalog to prevent smoking
and/or burning, etc.
5 This catalog has only typical specifi cations.
Therefore, please approve our product
specifi cations or transact the approval sheet
for product specifi cations before ordering.
6 Please note that unless otherwise specifi ed, we
shall assume no responsibility whatsoever for any
confl ict or dispute that may occur in connection
with the e ect of our and/or a third party’s
intellectual property rights and other related
rights in consideration of your use of our products
and/or information described or contained in our
catalogs. In this connection, no representation
shall be made to the e ect that any third parties
are authorized to use the rights mentioned above
under licenses without our consent.
7 No ozone depleting substances (ODS) under the
Montreal Protocol are used in our manufacturing
process.
Global Locations
For details please visit www.murata.com
Cat. No. C30E-5
C30E.pdf
May 9,2016