C30E.pdf May 9,2016 EMI Suppression Filters (Lead Type EMIFILr) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EU RoHS Compliant F**2&#.0-"3!21',2&'1!2*-%!-+.*7 5'2& - @ F - '12&# 30-.#,'0#!2'4# |z{{GG -,2&##120'!2'-,-$2&# 1#-$#02', 80"-313 12,!#1', *#!20'!*," *#!20-,'! /3'.+#,2@ FFor+-0#"#2'*1A.*#1#0#$#r2o-ur 5# 1'2#'Mur21A..roc&$o0 - ' H&22.BGG555@+302@!-+G#,#3G13..-02G!-+.*',!#G0-&1J@ C30E.pdf May 9,2016 C30E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Product Guide / Effective Frequency Range p2 Outline of EMI Suppression Filters (EMIFILr) for DC Line p3 Ferrite Beads Inductors Part Numbering p7 BL01/02/03 Series p8 Disc Type EMIFILr Part Numbering p11 DSS1 Series p12 Heavy-duty Type DSN9H/DST9H Series p14 EMIGUARDr (EMIFILr with Varistor Function) Part Numbering p16 VFC2H/VFR3V/VFS6V/VFS9V Series p17 Noise Suppression Effect of VFR/VFS Series p21 Common Mode Choke Coils p25 PLT09H Series p26 !Caution / Notice p27 Soldering and Mounting p28 Packaging p30 Packaging Soldering and Mounting Part Numbering EMIGUARDr (EMIFILr with Varistor Function) EMIFILr, EMIGUARDr, "EMIFIL" and "EMIGUARD" in this catalog are the trademarks of Murata Manufacturing Co., Ltd. Common Mode Choke Coils Product specifications are as of January 2016. !Caution / Notice Contents Disc Type EMIFILr Ferrite Beads Inductors May 9,2016 Please check the MURATA website (http://www.murata.com/) if you cannot find a part number in this catalog. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Product Guide/Effective Frequency Range Type Series Disc Type EMIFILr Ferrite Bead Inductor BL01/02/03 DSN9H DSS1 DST9H EMIGUARDr (EMI Filters with varistor functions) VFC2H VFR3V VFS6V/9V Common Mode Choke Coils PLT09H 2 Effective Frequency Range 10kHz 100kHz 1MHz 10MHz100MHz 1GHz 10GHz C30E.pdf May 9,2016 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C30E.pdf May 9,2016 Outline of EMI Suppression Filters (EMIFILr) for DC Line oFerrite Bead Inductor Ferrite Bead Inductor * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * p.8-10 BL01 BL02RN1 BL02RN2 BL03RN2 Outline Equivalent Circuit R(f) Impedance - Frequency Characteristics (typical) 160 140 120 Impedance () o Ferrite Bead Inductors are effective for frequencies ranging from a few MHz to a few GHz. Ferrite Bead Inductors are widely used as a low noise countermeasure, as well as a universal noise suppression component. o Ferrite Bead Inductors produce a micro inductance in a low frequency range. At high frequencies, however, the resistive component of the inductor produces the primary impedance. When inserted in series in the noise producing circuit, the resistive impedance of the inductor prevents noise propagation. 100 Z 80 R 60 X 40 20 0 0.5 1 2 5 10 20 50 100 200 500 1000 Frequency (MHz) R: Real Part (Resistive Portion) X: Imaginary Part (Inductive Portion) 3 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Outline of EMI Suppression Filters (EMIFILr) for DC Line oDisc Type EMIFILr Disc Type EMIFILr * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * p.12-15 DSS1 DSp9H Outline o This capacitor type EMI suppression filter has a large noise suppression effect at frequencies ranging from a few MHz to hundreds of MHz. This type of filter is used widely as a universal, high performance EMI suppression component. o Three-terminal construction reduces residual inductance, thereby substantially improving noise suppression at frequencies over 10MHz. 4 C30E.pdf May 9,2016 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C30E.pdf May 9,2016 Outline of EMI Suppression Filters (EMIFILr) for DC Line oEMIGUARDr EMIGUARDr * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * p.17-24 VFC2H VFR3V VFS6V VFS9V Outline o EMIGUARDr eliminates both surge noise and EMI noise applying some unique design like the use of dielectric varistor material to a 3 terminal capacitor. o Effective when high frequency noise and high voltage surge suppression are required, and also in situations when surging starts at extremely high speeds. This type of surging cannot be eliminated with general type varistors. Construction of EMIGUARDr (VFS9V) Varistor Electrode Ferrite Lead Surge Absorption Effect of EMIGUARDr Type of Filter Surge Absorption Effect of EMIGUARDr 4kV 500V /div No filter -1kV -100ns 50ns/div 400ns 50ns/div 400ns 50ns/div 400ns 4kV 500V /div Three-terminal capacitor is used to suppress the surge. -1kV -100ns 4kV EMIGUARDr is used to suppress the surge. (VFS6V) 500V /div -1kV -100ns 5 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Outline of EMI Suppression Filters (EMIFILr) for DC Line oCommon Mode Choke Coil Common Mode Choke Coil * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * p.26 PLT09H Outline o These choke coils reduce common mode noise, which causes problems on balanced transmission lines, and are effective against common mode noise in the several MHz to several 100MHz frequency range. They are ideally suited for noise suppression on DC power supply lines and interface cables. Construction of Common Mode Choke Coil Current of Common Mode (Noise) Current of Differential Mode (Signal) Equivalent Circuit 6 C30E.pdf May 9,2016 C30E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EMI Suppression Filters (Lead Type EMIFILr) Ferrite Beads Inductors Part Numbering Ferrite Beads Inductors May 9,2016 02 RN 2 R1 M 2 1 2 4 5 6 7 8 B 1Product ID 6Lead Length, Space Product ID Ferrite Beads Inductors 2Series Code Lead Length, Space A Bulk, Axial Type, 3.7mm Series D Bulk, Axial Type, 45.0mm E Taping, Axial Type, 26.0mm Taping, Axial Type, 52.0mm Code Series F 01 Beads o3.6 J Bulk, Radial Type, 5.0mm 02 Beads o3.4 M Bulk, Radial Type, 10.0mm 03 Beads o2.3 max. N Taping, Radial Type, 16.5mm P Taping, Radial Type, 18.5mm Q Taping, Radial Type, 20.0mm 3Beads Core Material Beads Core Material RN Standard Type BL02/BL03 7Lead Diameter 4Numbers of Beads Core Code Numbers of Beads Core 1 1 2 2 Code Lead Diameter 1 o0.60mm 2 o0.65mm 8Packaging 5Lead Type Code Lead Type Series A1 Axial Straight Type BL01 A2 Axial Crimp Type BL01 R1 Radial Straight Type BL02/BL03 R2 Radial Straight and Wave Formed Leads Type BL02 R3 Radial Incrimp Type BL02 Code Packaging Series A Ammo Pack BL01/BL02/BL03 B Bulk All Series Common Mode Choke Coils Code BL01 !Caution / Notice BL Soldering and Mounting 3 EMIGUARDr (EMIFILr with Varistor Function) BL Packaging (Part Number) Disc Type EMIFILr Ferrite Beads Inductors 7 C30E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Ferrite Beads Inductors BL01/02/03 Series o3.60.15 Features BL01/02/03 series are ferrite beads with lead wires to produce a high frequency loss for suppression of noise. Simple construction and easy-to-use, effective for low impedance circuits such as power supplies and grounds. Effective also for preventing overshoot and undershoot of digital signal in clocks or the like, and suppressing the higher harmonic wave. Suitable for prevention of abnormal oscillation at high frequency amplifying circuit. o0.65 * 20 min. *Coating extending on leads : 1.5 max. BL01RN1A1D2B (in mm) 15.0 min. o0.65 * 7.5 max. 3.71.0 * 10.01.0 o3.60.15 BL01RN1A2A2B o0.65 5.00.8 BL02RN1R2M2B 5.00.3 *Coating extending on leads : 1.5 max. *There is excess bond stick on the wire. (in mm) 9.0 max. o3.40.2 7.5 max. 15.0 min. o0.65 10.01.0 5.01.0 BL02RN1R3J2B * 15.0 min. 12.0 max. * 5.00.8 o0.65 5.00.8 BL02RN2R1M2B *There is excess bond stick on the wire. (in mm) (in mm) o2.3 max. 8.3 max. 15.0 min. 15.0 min. 12.0 max. 5.00.8 5.01.0 o3.40.2 6.5 max. 9.0 max. BL02RN2R3J2B (in mm) o3.40.2 o0.65 BL03RN2R1M1B (in mm) 10.01.0 Common Mode Choke Coils o3.40.2 * * !Caution / Notice Soldering and Mounting 20 min. 45 min. 7.5 max. 8.0 max. Packaging * 5.00.3 101.0 8 May 9,2016 EMI Suppression Filters (Lead Type EMIFILr) EMIGUARDr (EMIFILrwith Varistor Function) Disc Type EMIFILr Ferrite Beads Inductors * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 5.00.8 o0.60 (in mm) C30E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. May 9,2016 BL01RN1A1D2B 7 -40 to +85C BL01RN1A1E1A 6 -40 to +85C BL01RN1A1F1A 6 -40 to +85C BL01RN1A2A2B 7 -40 to +85C BL02RN1R2M2B 7 -40 to +85C BL02RN1R2N1A 6 -40 to +85C BL02RN1R2P1A 6 -40 to +85C BL02RN1R2Q1A 6 -40 to +85C BL02RN1R3J2B 7 -40 to +85C BL02RN1R3N1A 6 -40 to +85C BL02RN2R1M2B 7 -40 to +85C BL02RN2R1N1A 6 -40 to +85C BL02RN2R1P1A 6 -40 to +85C BL02RN2R1Q1A 6 -40 to +85C BL02RN2R3J2B 7 -40 to +85C BL02RN2R3N1A 6 -40 to +85C BL03RN2R1M1B 6 -40 to +85C BL03RN2R1N1A 6 -40 to +85C BL03RN2R1P1A 6 -40 to +85C BL03RN2R1Q1A 6 -40 to +85C Disc Type EMIFILr Operating Temperature Range EMIGUARDr (EMIFILr with Varistor Function) Rated Current (A) Part Number Ferrite Beads Inductors BL01/BL02/BL03 Series Common Mode Choke Coils Please refer to p.30, "Packaging" for Dimensions of Part Numbers Except for 'B' for the last code. !Caution / Notice Equivalent Circuit Soldering and Mounting (Resistance element becomes dominant at high frequencies.) Impedance - Frequency Characteristics BL02RN1 160 140 140 120 120 100 80 Z 60 R 40 100 80 Z 60 R 40 X X 20 0 0.5 Packaging Impedance () Impedance () BL01RN1 160 20 1 2 5 10 20 50 Frequency (MHz) 100 200 500 1000 0 0.5 1 2 5 10 20 50 Frequency (MHz) 100 200 500 1000 Continued on the following page. 9 C30E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. May 9,2016 Continued from the preceding page. Packaging Soldering and Mounting !Caution / Notice Common Mode Choke Coils EMIGUARDr (EMIFILrwith Varistor Function) Disc Type EMIFILr 10 BL02RN2 BL03RN2 160 160 140 140 120 120 Impedance () Impedance () Ferrite Beads Inductors Impedance - Frequency Characteristics 100 Z 80 R 60 X 40 100 80 Z 60 R 40 X 20 20 0 0.5 1 2 5 10 20 50 Frequency (MHz) 100 200 500 1000 0 0.5 1 2 5 10 20 50 Frequency (MHz) 100 200 500 1000 * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EMI Suppression Filters (Lead Type EMIFILr) Disc Type EMIFILr Part Numbering C30E.pdf May 9,2016 Ferrite Beads Inductors !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 2E 101 Q92 A 5 6 7 8 9 1Product ID 5Temperature Characteristics Product ID DS Code Capacitance Change B3 10% (Temperature Range: -25C to +85C) Three-terminal Capacitor 6Rated Voltage 2Structure Code Structure Code N No Ferrite Beads Type 1H Rated Voltage 50V S Built-in Ferrite Beads Type 2A 100V T with Ferrite Beads Type 2E 250V 7Capacitance Code Style 1 Expressed by a letter. 9 Expressed by three alphanumerics. The unit is in pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. Common Mode Choke Coils 3Style 4Category Code Category N for General Use H for Heavy-duty 8Lead Type/9Packaging Code Lead Type Lead Length* (mm) Q55B 25.0 min. Q50B 4.00.5 Q91A Straight Packaging Bulk 16.51.0 Q93A 18.51.0 *Lead Distance between Reference and Bottom Planes Except for Bulk. Series All series DST9H DSN9H, DSS1N 20.01.0 Q92A EMIGUARDr (EMIFILr with Varistor Function) 2 3 4 Ammo Pack DSp9H !Caution / Notice N 9 H B3 1 Soldering and Mounting DS Packaging (Part Number) Disc Type EMIFILr Disc Type EMIFILr 11 C30E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Packaging Soldering and Mounting !Caution / Notice Common Mode Choke Coils EMIGUARDr (EMIFILrwith Varistor Function) 12 May 9,2016 EMI Suppression Filters (Lead Type EMIFILr) Disc Type EMIFILr DSS1 Series 8.5 max. Features 7.5 max. 3.5 max. DSS1 series is a compact, high performance lead type 3 terminal capacitor which can be mounted in 2.54mm pitch. Its three terminal structure enables nice high frequency performance. Wide capacitance variation enables flexible selection for various noise frequencies. High speed mounting is available with automatic insertion machine. 2.50.5 5.0+0.8 -0.2 25.0 min. Disc Type EMIFILr Ferrite Beads Inductors * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. o0.56 DSS1_Q55B Series (in mm) Built-in Ferrite Beads DSS1 Series Capacitance (pF) Rated Voltage (Vdc) Rated Current (A) Operating Temperature Range DSS1NB32A220 22 10% 100 6 -40 to +85C DSS1NB32A330 33 10% 100 6 -40 to +85C DSS1NB32A470 47 10% 100 6 -40 to +85C DSS1NB32A680 68 10% 100 6 -40 to +85C DSS1NB32A101 100 10% 100 6 -40 to +85C DSS1NB32A121 120 10% 100 6 -40 to +85C DSS1NB32A151 150 10% 100 6 -40 to +85C DSS1NB32A221 220 10% 100 6 -40 to +85C DSS1NB32A271 270 10% 100 6 -40 to +85C DSS1NB32A331 330 10% 100 6 -40 to +85C DSS1NB32A471 470 10% 100 6 -40 to +85C DSS1NB32A681 680 10% 100 6 -40 to +85C DSS1NB32A102 1000 10% 100 6 -40 to +85C DSS1NB32A152 1500 10% 100 6 -40 to +85C DSS1NB32A222 2200 10% 100 6 -40 to +85C DSS1NB32A332 3300 10% 100 6 -40 to +85C DSS1NB32A472 4700 10% 100 6 -40 to +85C DSS1NB32A682 6800 10% 100 6 -40 to +85C DSS1NB32A103 10000 10% 100 6 -40 to +85C DSS1NB32A153 15000 10% 100 6 -40 to +85C DSS1NB32A223 22000 10% 100 6 -40 to +85C DSS1NB31H333 33000 10% 50 6 -40 to +85C DSS1NB31H473 47000 10% 50 6 -40 to +85C DSS1NB31H104 100000 10% 50 6 -40 to +85C Part Number Please refer to Part Numbering for Type and Length of Lead. C30E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 80 0.1 1 10 Frequency (MHz) 100 1000 Disc Type EMIFILr No Polarity. EMIGUARDr (EMIFILr with Varistor Function) 60 3300pF 4700pF 6800pF 10000pF 15000pF 22000pF 33000pF 47000pF 100000pF Common Mode Choke Coils GND 40 120pF 150pF 220pF 270pF 330pF 470pF 680pF 1000pF 1500pF 2200pF !Caution / Notice Insertion Loss (dB) 20 Soldering and Mounting 22pF 33pF 47pF 68pF 100pF 0 Ferrite Beads Inductors Insertion Loss Characteristics Packaging Equivalent Circuit May 9,2016 13 C30E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. May 9,2016 EMI Suppression Filters (Lead Type EMIFILr) Disc Type EMIFILr Heavy-duty Type DSN9H/DST9H Series Features 4.0max DS_9H is a basic type EMI suppression filter which can obtain high insertion loss in a wide frequency range. Its three terminal structure enables nice high frequency performance. High rated voltage of 250Vdc and wide operating temperature range from -40 degrees C to 105 degrees C are suitable for high reliability circuits. 10.0max 9.5max 1.5max 2.50.5 25.0min Disc Type EMIFILr Ferrite Beads Inductors * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 5.00.5 1.00.5 o0.65 DSN9H_Q55B (in mm) Diameter of lead is 0.6mm for taping type. Taping type is three terminal in-line arrangement. 4.0 max. 1.5 max. 15.5 max. 9.5 max. Ferrite bead 2.50.5 Common Mode Choke Coils I 5.00.5 I1 EMIGUARDr (EMIFILrwith Varistor Function) Supplement 1.250.5 o0.65 DST9H_Q55B GND Q55 Type: I=25.0 min. Q50 Type: I1=4.00.5 (in mm) !Caution / Notice DSN9H Series Capacitance (pF) Rated Voltage (Vdc) Rated Current (A) Operating Temperature Range DSN9HB32E220 22 20% 250 6 -40 to +105C DSN9HB32E101 100 20% 250 6 -40 to +105C DSN9HB32E271 270 20% 250 6 -40 to +105C DSN9HB32E222 2200 20% 250 6 -40 to +105C Part Number Equivalent Circuit Insertion Loss Characteristics 20 270pF 2200pF 40 60 80 GND 100 No Polarity. 120 0.1 14 (50 - 50) 22pF 100pF 0 Insertion Loss (dB) Packaging Soldering and Mounting Please refer to Part Numbering for Type and Length of Lead. 1 10 Frequency (MHz) 100 1000 C30E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. With Ferrite Beads DST9H Series Capacitance (pF) Rated Voltage (Vdc) Rated Current (A) Operating Temperature Range DST9HB32E220 22 20% 250 6 -40 to +105C DST9HB32E101 100 20% 250 6 -40 to +105C DST9HB32E271 270 20% 250 6 -40 to +105C DST9HB32E222 2200 20% 250 6 -40 to +105C Part Number Ferrite Beads Inductors May 9,2016 Insertion Loss Characteristics (50 - 50) 100pF 22pF 0 20 100 No Polarity. 120 0.1 1 10 Frequency (MHz) 100 1000 EMIGUARDr (EMIFILr with Varistor Function) 80 GND Common Mode Choke Coils 60 !Caution / Notice 40 Soldering and Mounting Insertion Loss (dB) 270pF 2200pF Packaging Equivalent Circuit Disc Type EMIFILr Please refer to Part Numbering for Type and Length of Lead. 15 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Ferrite Beads Inductors * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EMI Suppression Filters (Lead Type EMIFILr) EMIGUARDr (EMIFILr with Varistor Function) Part Numbering Disc Type EMIFILr EMIGUARDr (EMIFILr with Varistor Function) (Part Number) S 1 2 3 4 VF C 1 2 3 4 EMIGUARDr (EMIFILrwith Varistor Function) Common Mode Choke Coils !Caution / Notice 5 : 2 H R7 1D 105 K 5 6 7 ; 2 T51 B 8 9 : ; Product ID EMIGUARDr Lead Type 2Structure Code Capacitance Change D8 +20/-30% (Temperature Range: -40C to +105C) D3 +20/-30% (Temperature Range: -25C to +85C) R7 15% (Temperature Range: -55C to +125C) Code Structure S Built-in Ferrite Beads Type 6Rated Voltage R with Resistance Code Rated Voltage C Built-in Capacitor 1B 12V 1D 22V 1E 25V 3Style Code Style 2 7Capacitance 3 Expressed by three alphanumerics. The unit is in pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. Size is expressed by a digit 6 9 8Capacitance 4Features Code Features V with Varistor Function H with Varistor Function (for Automotive) Code Capacitance K 10% 9Varistor Voltage Code Varistor Voltage 2 27V :Lead Type/;Packaging Lead Length* Packaging 25.0mm min. Bulk 18.51.0mm Ammo Pack Q55B 25.0mm min. Bulk Q91J 20.01.0mm Code U31A Q92J Lead Type Incrimp Straight Q93J 16.51.0mm Paper Reel (o320mm) Series VFR3/VFS6 VFS9 18.51.0mm *Lead Distance between Reference and Bottom Planes Except for Bulk. Code Lead Type K1B M1A Packaging T51 B 7 5Temperature Characteristics T51B 16 6 1Product ID VF Soldering and Mounting 6 V D8 1E 221 VF M1J *From bottom of the crimp. Inside Crimp Lead Length* Packaging 26.01.0mm Bulk 18.01.0mm Ammo Pack Paper Reel (o320mm) Series VFC2 C30E.pdf May 9,2016 C30E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EMI Suppression Filters (Lead Type EMIFILr) EMIGUARDr (EMIFILr with Varistor Function) VFC2H/VFR3V/VFS6V/VFS9V Series 5.0 max. Disc Type EMIFILr 3.0 max. 6.0 max. VFC2H series is EMI suppression filters of lead type that combines the varistor and capacitor. 1. Suitable for absorbing surge voltages occurred from inductive load of motors, relays, etc. 2. High maximum energy 3. Smaller size, High capacitance 4. Taping is capable of fast implementation of automatic insertion. Part Number Varistor Voltage (Vdc) Capacitance (F) Temperature Characteristics VFC2HR71D105K2 27 +5/-3V 1.0 10% R7 (15%) 26.01.0 Features 5.20.5 VFC2H Series 1 (2) 2 (1) (in mm) Insulation Operating Rated Voltage Rated Current Resistance (min.) Temperature Range (Vdc) (M ohm) 22 - 1 -55 to 125C EMIGUARDr (EMIFILr with Varistor Function) 4.0 max. VFC2H Series Ferrite Beads Inductors May 9,2016 !Caution / Notice Soldering and Mounting Packaging Equivalent Circuit Common Mode Choke Coils Please refer to Part Numbering for Type and Length of Lead. 17 C30E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Semiconductor Protection VFR3V Series Features 5.0 max. VFR3V series is designed for ESD surge protection of IC. It efficiently absorbs ESD surges rushed into IC's I/O terminal. No.1 Pin Indicator (Surge entrance side) 2.50.5 Applications Disc Type EMIFILr Elimination of noise and protection of semiconductors in office equipment, including computers and peripheral equipment, copy machines, and communication terminals. Part Number Packaging Soldering and Mounting !Caution / Notice (2) (3) (in mm) Rated Current (mA) Peak Pulse Current (A) Operating Temperature Range 50 20% 130 20% 25 20 30 -25 to 85C (50 - 50) 10 20 30 40 50 60 10 (1) Rated Voltage (Vdc) 0 5 VFR3V Series Capacitance (pF) Insertion Loss Characteristics Insertion Loss (dB) Common Mode Choke Coils EMIGUARDr (EMIFILrwith Varistor Function) VFR3VD31E131 o0.450.1 Varistor Voltage (Vdc) Please refer to Part Numbering for Type and Length of Lead. 70 2.3 max. 8.0 max. 5.00.5 18 May 9,2016 25.0 min. Ferrite Beads Inductors * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 100 Frequency (MHz) 1000 C30E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 10.5 max. Features VFS6V series is designed for surge protection of signal line. It protects electric circuit from surges such as static electricity and suppresses EMI noise. Built-in ferrite bead gives excellent EMI suppression. 25.0 min. 2.50.5 5.00.5 (in mm) Varistor Voltage (Vdc) Capacitance (pF) Rated Voltage (Vdc) Rated Current (A) Peak Pulse Current (A) Operating Temperature Range 50 20% 220 20% 25 6 100 -40 to 105C Please refer to Part Numbering for Type and Length of Lead. Insertion Loss Characteristics (50 - 50) Common Mode Choke Coils 20 40 GND No Polarity 60 10.0 100.0 Frequency (MHz) 1000.0 !Caution / Notice Insertion Loss (dB) 0 Soldering and Mounting Equivalent Circuit EMIGUARDr (EMIFILr with Varistor Function) GND *1 The bottom of the ferrite beads may not be level with each other. *2 There may be a hole on the top of ferrite beads, which causes no characteristics deterioration. Packaging VFS6V Series Disc Type EMIFILr o0.6 Elimination of noise and protection of electric circuits in office equipment, including computers and peripheral equipment, copy machines, and communication terminals. VFS6VD81E221 *2 *1 Applications Part Number 2.54 max. 8.0 max. Ferrite Beads Inductors Signal Line VFS6V Series May 9,2016 19 C30E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. May 9,2016 Large Current VFS9V Series VFS9V series is designed for surge protection of the power supply. It protects electric circuits from surge such as static electricity and suppresses EMI noise. Its large capacitance value enables high insertion loss for EMI noise. 7.5 max. 10.5 max. 12.0 max. Features *1 1.5 max. 2.50.5 *2 Ferrite bead 25.0 min. Ferrite Beads Inductors * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 5.00.5 2.50.5 Disc Type EMIFILr o0.65 Applications VFS9V Series VFS9VD31B223 (in mm) *1 Coating extending on leads does not exceed the tangent line. Exposed electrode, if any, is covered by solder, etc. *2 If there is a hole in the top of the filter, the ferrite bead should not be exposed. For circuit protection and noise suppression in electronics equipment such as computers and DC motors, and in electronics systems installed in cars such as car audio equipment and engine controllers. Part Number Varistor Voltage (Vdc) Capacitance (pF) Rated Voltage (Vdc) Rated Current (A) Operating Temperature Range 22 20% 22000 +50/-20% 12 7 -40 to 100C Rated current is 7A for bulk type and 6A for taping type. Rated current of taping type is 6A because the diameter of the lead is 0.6mm and its lead layout is the in-line type. Please refer to Part Numbering for Type and Length of Lead. Equivalent Circuit Insertion Loss Characteristics Common Mode Choke Coils EMIGUARDr (EMIFILrwith Varistor Function) GND (50 - 50) 0 Insertion Loss (dB) 20 40 60 GND !Caution / Notice 80 No Polarity 100 0.1 Voltage - Current Characteristics 200 100 Current (mA) Soldering and Mounting 300 -30 -40 -20 -10 0 10 -100 Packaging -200 20 -300 Voltage (V) 20 30 40 0.5 1 5 10 50 100 Frequency (MHz) 500 1000 C30E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. May 9,2016 Example of IC Protection (VFR3V) Ferrite Beads Inductors Noise Suppression Effect of VFR/VFS Series Test Circuit o Testing Method 1. Put ESD surge to IC (7404 family) input terminal with ESD simulator based on IEC 801-2. 2. Check IC's operation. 3. If IC's operation is normal, increase ESD voltage in 1kV steps. 4. Continue above steps 1 to 3 till IC's operation becomes abnormal. VFR3V 330 Test IC ESD Simulator o Result Varistor VFR3V can protect IC from ESD. (Result) Breakdown level [kV] 30 min. With use VFR3V EMIGUARDr (EMIFILr with Varistor Function) Without VFR3V Disc Type EMIFILr 150pF 25 20 15 10 0 Example of EMI Suppression Effect LS ALS AS C IC's Family HC AC Test Circuit Common Mode Choke Coils 5 Signal 1MHz F ACO4 Noise Radiation Cable (50cm) Shield Type of Filter EMI Suppression Effect !Caution / Notice ANT 60 50 40 30 20 30 90 150 210 270 330 270 330 Frequency (MHz) Soldering and Mounting Before Countermeasures (No Filters) Noise Level (dBV/m) 70 60 Packaging Using VFR3VD31E131T51 Noise Level (dBV/m) 70 50 40 30 20 30 90 150 210 Frequency (MHz) 21 C30E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. May 9,2016 Features (VFS9V) Items Test methods Overload 1.4 times the varistor voltage (V1) is applied for 5 minutes at room temperature. Surge Test (2) High Temperature Load At room temperature, Surges are applied 105 times every 2 seconds. Then after 1 or 2 hours, the sample is measured. At room temperature, the capacitor "C" is charged with 70V, then discharged to apply the voltage to the sample. Tested once (resuming JASO A-1). Items Specifications Rated Capacitance Change Within15% 0.8 Insulation Resistance 500k min. 2 Rated of Change in Varistor Voltage V1* Within15% Voltage Rate 1.30 max. 0.47F 70V C C=110mF *V1: Voltage when 1mA is applied Pulse-Voltage Breakdown Characteristic (VFS9V) VFS9V EMIGUARDr use a self healing varistor- capacitor, so that it can be used under a 500 to 600V surge that would break conventional disc type EMI filters. As shown in the figure below EMIGUARDr withstands 2000V impulses applied 1000 times. 50 50 VFS9V Residual Rate (%) 100 Capacitance: 0.022F with varistor function 3-terminal capacitor Capacitance: 0.022F with no varistor function 50 0 0 1500 500 1000 Pulse Voltage Applied (V) V 800ns Residual ratio when 1000 pulses are applied 2000 Temperature Characteristics of Varistor Voltage - Insulation Resistance (VFS9V) 104 Insulation resistance Change rate of varistor voltage +10 103 0 102 -10 10 1 -30 0 30 60 Temperature (C) Change Rate of Varistor Voltage (%) Soldering and Mounting Packaging 400V At a temperature of 853C, the varistor voltage V1 is continuously applied to the sample for 1000 to 1024 hours. Then it is left at room temperature, for 4 to 24 hours before measuring. !Caution / Notice Common Mode Choke Coils EMIGUARDr (EMIFILrwith Varistor Function) Disc Type EMIFILr Surge Test (1) Rated values Insulation Resistance (M) Ferrite Beads Inductors Noise Suppression Effect of VFR/VFS Series 90 Continued on the following page. 22 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C30E.pdf May 9,2016 Continued from the preceding page. Noise Absorption Effect of EMIGUARDr (VFS9V) Type of Filter EMI Suppression Effect Description : 200V/div : 10ns/div Waveform when EMIGUARDr is not used. (Surge from a noise simulator.) : 200V/div : 10ns/div Waveform after the noise passed through EMIGUARDr. Little noise is recorded. 100 90 80 Ferrite Beads Inductors Noise Suppression Effect of VFR/VFS Series 20 10 0% Comparative Data (VFS9V) 1. Absorption of quick-rising, high-frequency noise (10ns/div, 100V/div) Type of Filter EMI Suppression Effect Description 2000V 50ns Without Filters Noise wave applied Conventional varistor As with the two-terminal capacitor 100 90 80 EMIGUARDr (EMIFILr with Varistor Function) D 223S 12-22 100 90 80 Common Mode Choke Coils with EMIGUARDr !Caution / Notice 20 10 0% Disc Type EMIFILr without EMIGUARDr 100 90 80 20 10 0% VFS9V 100 90 80 20 10 0% The two-terminal capacitor is influenced by lead line inductance, leaving behind some of the rising and falling edges. The residual noise can cause the system to malfunction. Soldering and Mounting Two-terminal capacitor (with varistor function) The three-terminal structure eliminates most of the lead line inductance. This allows VFS9V to completely absorb the rising and falling edges of the applied pulses. Packaging 20 10 0% Continued on the following page. 23 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C30E.pdf May 9,2016 Continued from the preceding page. 2. Absorption of wide-pulse noise (50ns/div, 200V/div) Type of Filter EMI Suppression Effect 200ns Packaging Soldering and Mounting !Caution / Notice Common Mode Choke Coils EMIGUARDr (EMIFILrwith Varistor Function) Disc Type EMIFILr Without Filters 24 Description 1300V Ferrite Beads Inductors Noise Suppression Effect of VFR/VFS Series Noise wave applied Two-terminal capacitor 100 90 80 In capacitors the voltage of the residual surge (1300V) is higher than that of the above example. The wave height is almost the same as the original. 20 10 0% Three-terminal capacitor (with ferrite bead) 100 90 80 20 10 0% VFS9V 100 90 80 20 10 0% Conventional EMI filters do not work for wide-pulse noise because the capacitors are saturated. In this example, the residual 1200V surge can cause the system to break down. Bypassing the high voltage to the ground suppresses the voltage. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EMI Suppression Filters (Lead Type EMIFILr) Common Mode Choke Coils Part Numbering C30E.pdf May 9,2016 Ferrite Beads Inductors !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 3 4 5 6 1 6Rated Current 1Product ID Product ID PL B 7 8 9 Common Mode Choke Coils 2Type Expressed by three-digit alphanumerics. The unit is in amperes (A). A decimal point is expressed by the capital letter "R". In this case, all figures are significant digits. 7Winding Mode Code Type Code Winding Mode T DC Type P Aligned Winding Type 3Applications 8Lead Dimensions Code Applications Code Lead Dimensions 09H for DC Line High-frequency Type 1 5mm 4Features EMIGUARDr (EMIFILr with Varistor Function) 09H N 200 3R0 P 9Packaging Code Features Code Packaging Series N General Use B Bulk All series 5Inductance Expressed by three figures. The unit is micro-henry (H). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two figures. Common Mode Choke Coils 2 !Caution / Notice T 1 Soldering and Mounting PL Packaging (Part Number) Disc Type EMIFILr Common Mode Choke Coils 25 C30E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. Common Mode Choke Coils EMIGUARDr (EMIFILrwith Varistor Function) May 9,2016 EMI Suppression Filters (Lead Type EMIFILr) 13 max. Common Mode Choke Coils (for DC Line) PLT09H Series PLT09H series is a common mode choke coil for DC lines. It is effective against the common mode noise that can cause radiative noise in power supply lines and interface lines. The additional normal mode inductance enables high suppression effect to radiation noise. 14 max. 51 8 max. Disc Type EMIFILr Ferrite Beads Inductors * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 50.5 Soldered Features (1) (2) (4) (3) o0.6 max. 100.5 PLT09H Series 1. This is a wide frequency range type, applicable in applications ranging from a few MHz to several 100MHz. 2. It features a low-profile design. (in mm) Applications 1. Noise suppression of SW power supply, DC-DC converter 2. DC power lines in AC adapter of Portable equipment Part Number Rated Current (A) Rated Voltage (Vdc) Withstand Voltage (Vdc) Common Mode Inductance (H) 3 50 125 20 min. PLT09HN2003R0P1 Operating Temperature Range: -40 to +85C Equivalent Circuit Insertion Loss Characteristics (50 - 50) 5 (1) (2) Packaging Soldering and Mounting (4) 26 Insertion Loss (dB) !Caution / Notice 0 10 15 20 (3) 25 No polarity. 30 0.1 1 10 Frequency (MHz) 100 1000 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C30E.pdf May 9,2016 o Rating Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. o Soldering and Mounting 1. Mounting holes should be designed as specified in these specifications. Other designs than those shown in these specifications may cause cracks in ceramics that may lead to smoking or firing. 2. DSN9H/DST9H/VFS9V Series Mounting for PCB. (Applis only to bulk type.) The form of the mounting hole of the bulk item is a triangle. The product should be inserted and soldered to each hole in the correct way as in Fig.1. (The center terminal and the other terminals become parallel when viewing the product from the side.) Smoking and firing maybe caused by incorrect mounting as in Fig.2. (The center terminal and the other terminals cross when viewing the product from the side.) Marking Side Center Terminal (Ground Terminal) Fig.1 Right Way Fig.2 Wrong Way 3. Take care not to apply any mechanical stress to product body at the lead terminal bending process for product angle adjustment after insertion. EMIGUARDr (EMIFILr with Varistor Function) !Caution Disc Type EMIFILr Ferrite Beads Inductors !Caution/Notice Example of input terminal Incoming Electrostatic Surges Example of output terminal Incoming Electrostatic Surges 2. Products should be used at rated voltage or less and rated current or less. 3. Products should not be applied for the absorption of surges that have large energy (e.g., induced lightning surges, switching surges) because it is designed for the absorption of electrostatic surges (VFR3V). 4. Electrostatic testing should be done on the following conditions (VFR3V). ,FKGF2 ]2 < 8.0 x105 n: Times applied C: Charging Capacitance (pF) V: Testing Voltage (kV) R: Charging Resistance () 1. Washing Failure and degradation of a product are caused by the washing method. When you wash in conditions that are not in the mounting information, please contact Murata engineering. 2. Soldering Reliability decreases with improper soldering methods. Please solder by the standard soldering conditions shown in the mounting information. 3. Other Noise suppression levels resulting from Murata's EMI suppression filters EMIFILr may vary, depending on the circuits and ICs used, type of noise, mounting pattern, lead wire length, mounting location, and other operating conditions. Be sure to check and confirm in advance the noise suppression effect of each filter, in actual circuits, etc. before applying the filter in a commercial-purpose equipment design. Soldering and Mounting o Soldering and Mounting Packaging <Operating Environment> 1. Do not use products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. 2. Do not use products near water, oil or organic solvents. Avoid environments where dust or dirt may adhere to the product. <Storage and Handling Requirements> 1. Storage Period Use the products within 12 months after delivery. Solderability should be checked if this period is exceeded. 2. Storage Conditions (1) Storage temperature: -10 to 40 degrees C Relative humidity: 15 to 85% Avoid sudden changes in temperature and humidity. (2) Do not store products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. (3) When restoring taping type (BL01RN1A1F1J), please attach the spacer between the flanges of the reel. The spacer is corrugated paper that is attached when shipping. <Using EMIGUARDr effectively> 1. Terminal (with mark) should be properly connected to the line of incoming electrostatic surge. (There is polarity.) Otherwise, no effect in ESD suppression can be expected (VFR3V). !Caution / Notice o Storage and Operating Conditions Common Mode Choke Coils Notice 27 C30E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. May 9,2016 1. Mounting Hole Mounting holes should be designed as specified below. Part Number Bulk Type (in mm) VFR3V VFS6V DSS1 o0.8-3 EMIGUARDr (EMIFILrwith Varistor Function) Common Mode Choke Coils !Caution / Notice Soldering and Mounting Packaging 2.50.2 o0.8-3 2.50.2 VFS9V o1.0-3 1.250.2 2.50.2 DST9H 28 1.00.2 DSN9H 2.50.2 2.50.2 2.50.2 2.50.2 2.50.2 Disc Type EMIFILr 2.50.2 o0.8-3 2.50.2 VFC2H Taping Type (in mm) o0.8-3 2.50.2 o0.8-2 o1.0-2 5.20.4 5.20.4 2. Soldering (1) Use Sn-3.0Ag-0.5Cu solder. (2) Use Rosin-based flux. Do not use strong acidic flux with halide content exceeding 0.2wt% (chlorine conversion value). (3) Products and the leads should not be subjected to any mechanical stress during the soldering process, or while subjected to the equivalent high temperatures. (4) Standard flow soldering profile. 300 Temperature (C) Ferrite Beads Inductors Soldering and Mounting Pre-heating Soldering Gradual cooling (in air) Soldering temperature 250 200 150 150C 100 50 60s min. Solder Sn-3.0Ag-0.5Cu solder Soldering time Soldering Temperature Soldering Time 250 to 260C 4 to 6s Continued on the following page. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C30E.pdf May 9,2016 Disc Type EMIFILr EMIGUARDr (EMIFILr with Varistor Function) Common Mode Choke Coils (4) There should be no residual flux or residual cleaner left after cleaning. In the case of using aqueous agent, products should be dried completely after rinsing with de-ionized water in order to remove the cleaner. (5) The surface of products may become dirty after cleaning, but there is no deterioration on mechanical, electrical characteristics and reliability. (6) Other cleaning: Please contact us. !Caution / Notice Do not clean VFR3V, PLT09H and VFS6V series. Clean other parts in the following conditions. (1) Cleaning temperature should be limited to 60C max. (40C max for alcohol type cleaner). (2) Ultrasonic cleaning should comply with the following conditions, avoiding the resonance phenomenon at the mounted products and PCB. Power: 20 W /Rmax. Frequency: 28 to 40kHz Time: 5 min. max. (3) Cleaner (a) Alcohol type cleaner Isopropyl alcohol (IPA) (b) Aqueous agent (PLT series cannot be cleaned) PINE ALPHA ST-100S Soldering and Mounting 3. Cleaning Conditions Packaging Continued from the preceding page. Ferrite Beads Inductors Soldering and Mounting 29 C30E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. May 9,2016 Ferrite Beads Inductors Packaging Minimum Quantity (Pcs.) Series Bulk Ammo Pack o320mm Paper Reel BL01RN 500 1000 2000 BL02RN 500 1500 -- BL03RN 1000 2000 -- 3.40.2 h1 od D0 t P0 *There is excess bond stick on the wire. BL02RN2R1p1A S S W2 h1 h2 L H1 od W0 W W0 F t I D0 I D0 P0 t P0 W1 P1 3.40.2 9.0 max. P 7.5 max. h2 od h1 L W1 3.40.2 W2 F P1 P2 * H1 P 12.0 max. P2 8.0 max. *There is excess bond stick on the wire. BL02RN2R3N1A BL03RN2R1p1A S S W2 W0 P0 Symbol Dimension (mm) Remarks Pitch of component P 12.7 Product inclination S determines tolerance Pitch of sprocket hole P0 12.70.2 Lead spacing F 5.0 +0.8 -0.2 Hole center to lead P1 3.850.7 Hole center to component center P2 6.351.3 Offset of bead S 1.0 Carrier tape width W 18.00.5 Position of sprocket hole W1 +0 9.0 -0.5 0.0 Description Lead length between sprocket hole and forming position +0.5 to -1.0 D0 o4.00.1 Lead Diameter od o0.60 t 0.70.2 h1, h2 1.0 max. L 11.0 +0 0.0 -1.0 Hold down tape width W0 12.00.5 Hold down tape position W2 1.51.5 Cutting position of failure Tape with deviation Lead Length Number : P 18.50.5 BL02, BL03 Diameter of sprocket hole Deviation across tape, Deviation across tape rear Including the offset caused by lead bend Lead Length Number : Q 20.00.5 BL02RN1R2/2R1, BL03 I Total tape thickness Tape deviation in feeding direction Lead Length Number : N 16.50.5 BL02, BL03 H1 h2 t t P0 od h1 I W W0 D0 I D0 F H1 P1 2.3 max. 8.3 max. 6.5 max. h2 P L od h1 P2 W1 W2 3.40.2 H1 F 9.0 max. L W1 W P 12.0 max. P2 Including bonding tape thickness (in mm) 30 h2 L F H1 W2 * W0 W 3.2 min. 0.8 max. L2 W1 P1 7.5 max. P 7.5 max. 50.5 1.2 max. P2 BL02RN1R3N1A W EMIGUARDr (EMIFILrwith Varistor Function) Common Mode Choke Coils S Protruding length Packaging BL02RN1R2p1A *L 6.01.0 | L1 - L2 | < =1.5 *L BL01RN1A1F1A : 52+2/-1 BL01RN1A1E1A : 26+1.5/-0 P1 !Caution / Notice o0.600.05 L1 0.8 max. Soldering and Mounting 50.3 0 max. I o3.6 0.15 BL01RN_A Direction of feed Disc Type EMIFILr Taping Dimensions C30E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. May 9,2016 Lead Type Code VFR3V Series 2000 -- 250 VFS6V Series 2000 -- 250 T51 DSN9H Series 2000 -- 250 Q55 Lead Length (H) Incrimp Type Q91 - 20.01.0mm Q92 - 16.51.0mm Q93 U31 18.51.0mm VFS9V Series -- 800 200 Lead Type Code VFC2H Series 2000 2000 500 Inside Crimp Lead Length (from bottom of the crimp) DSS1 Series 1500 1500 250 K1B 26.01.0mm M1A 18.01.0mm Disc Type EMIFILr Bulk (Bag) Lead Type Code Straight Type Taping Dimensions +0.5 to -1.0 0.70.2 5.0+0.8/-0.2 +0.5 to -1.0 18.00.5 H +0.5 to -1.0 o4.00.1 12.70.2 5.0+0.8/-0.2 2.5+0.4/-0.2 2.3 max. 18.00.5 2.5+0.4/-0.2 (1)(2)(3) o0.450.1 +0.5 to -1.0 o4.00.1 0.70.2 12.70.2 1.5 max. *1 Coating extending on leads does not exceed the start of the bend (point A). Exposed electrodes are covered with solder. *2 H: to be measured from the forming point A. *3 The deviation between two ferrite beads should be less than 1.2mm. 1.51.5 9.0+0/-0.5 o0.6 *1 Point A 1.0 max. Packaging AY 1.0 max. 12.00.5 AY 5.0 max. 8.0 max. 01.0 11.0+0/-1.0 1.5 max. 0.70.2 +0.5 to -1.0 o4.00.1 6.351.3 12.7 AY *2 H 2.5+0.4/-0.2 1.0 max. 3.850.7 12.00.5 *3 1.51.5 *2 H 11.0 max. 1.0 max. 18.51.0 12.0 max. 01.0 11.0+0/-1.0 12.70.2 *1 The bottom of the dielectric may be exposed. *2 If a hole is on the top of the ferrite bead, the bead should not be exposed. VFR3V_U31 3.850.7 5.0+0.8/-0.2 o0.6 7.5 max. 2.5+0.4/-0.2 6.351.3 12.7 1.51.5 2.5+0.4/-0.2 H U31 Type : 18.51.0 VFS9V_Q91/Q92/Q93 1.0 max. 1.5 max. 12.70.2 H Q92 Type : 16.51.0 Q93 Type : 18.51.0 o0.6 3.850.7 2.54 max. 1.0 max. 0.70.2 o4.00.1 11.0+0/-1.0 1.5 max. 0.70.2 H 2.5+0.4/-0.2 2.5+0.4/-0.2 8.0 max 01.0 *1 12.00.5 1.51.5 9.0+0/-0.5 3.850.7 11.0+0/-1.0 1.0 max. 15.5 max. 1.0 max. 9.0+0/-0.5 9.5 max. 01.0 6.351.3 12.7 *2 12.00.5 2.5+0.4/-0.2 VFS6V : 10.5 max. VFS6V_U31 6.351.3 12.7 18.00.5 Common Mode Choke Coils 1.5 max. 1.5 max. 4.0 max. 18.00.5 o4.00.1 *1 The bottom of the dielectric may be exposed. *2 If a hole is on the top of the ferrite bead, the bead should not be exposed. 5.0+0.8/-0.2 9.0+0/-0.5 *2 o0.6 12.70.2 DST9H_Q92/Q93 H Q91 Type : 201.0 Q92 Type : 16.51.0 Q93 Type : 18.51.0 1.0 max. o0.6 0.70.2 12.70.2 H Q91 Type : 201.0 Q92 Type : 16.51.0 Q93 Type : 18.51.0 3.5 max. 1.0 max. 1.51.5 3.850.7 +0.5 to -1.0 o4.00.1 5.0+0.8/-0.2 *1 01.0 2.5+0.4/-0.2 11.0+0/-1.0 9.0+0/-0.5 1.0 max. 12.7 18.00.5 1.51.5 1.0 max. 6.351.3 12.00.5 18.00.5 3.850.7 9.0+0/-0.5 11.0+0/-1.0 01.0 DSN9_ : 4.0 max. DSN9_ : 11.0 max. 6.351.3 12.7 2.5+0.4/-0.2 H DSN9_ : 9.5 max. 12.00.5 8.0 max. 5.0+0.8/-0.2 7.5 max. DSS1_Q91 20.01.0 DSN9H_Q91/Q92/Q93 EMIGUARDr (EMIFILr with Varistor Function) Ammo Pack o320mm Paper Reel !Caution / Notice Minimum Order Quantity (order in sets only) (pcs.) Part Number Soldering and Mounting Minimum Quantity Ferrite Beads Inductors Packaging (in mm) Continued on the following page. 31 C30E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. May 9,2016 Packaging Soldering and Mounting !Caution / Notice Common Mode Choke Coils EMIGUARDr (EMIFILrwith Varistor Function) 32 Continued from the preceding page. Taping Dimensions VFC2H_M1 12.7 3.0 max. 5.0+0.8/-0.2 1.0 max. 01.0 1.51.5 1.0 max. o0.48 3.850.7 1 2 (2) (1) o4.00.1 0.60.3 12.70.2 +0.5 to -1.0 18.00.5 12.00.5 11.0+0/-1.0 9.0+0/-0.5 5.0 max. 18.01.0 6.351.3 1.5 max. Disc Type EMIFILr Ferrite Beads Inductors Packaging (in mm) C30E.pdf May 9,2016 Cat. No. C30E-5 Global Locations For details please visit www.murata.com Note 1 Export Control For customers outside Japan: No Murata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or otherwise contribution to (1) any weapons (Weapons of Mass Destruction [nuclear, chemical or biological weapons or missiles] or conventional weapons) or (2) goods or systems specially designed or intended for military end-use or utilization by military end-users. For customers in Japan: For products which are controlled items subject to the "Foreign Exchange and Foreign Trade Law" of Japan, the export license specified by the law is required for export. 2 Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. 1 Aircraft equipment 2 Aerospace equipment 3 Undersea equipment 4 Power plant equipment 5 Medical equipment 6 Transportation equipment (vehicles, trains, ships, etc.) 7 Traffic signal equipment 8 Disaster prevention / crime prevention equipment 9 Data-processing equipment 10 Application of similar complexity and/or reliability requirements to the applications listed above Murata Manufacturing Co., Ltd. www.murata.com 3 Product specifications in this catalog are as of January 2016. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4 Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5 This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6 Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7 No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.