MM74HC273WM - ON SEMICONDUCTOR

To learn more about ON Semiconductor, please visit our website at

www.onsemi.com

Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers

will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor

product management systems do not have the ability to manage part nomenclature that utilizes an underscore

(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain

device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated

device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please

email any questions regarding the system integration to Fairchild_questions@onsemi.com.

Is Now Part of

ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number

of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right

to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability

arising out of the application or use of any product or circuit, and speciﬁcally disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON

Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON

Semiconductor data sheets and/or speciﬁcations can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s

technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA

Class 3 medical devices or medical devices with a same or similar classiﬁcation in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended

or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its ofﬁcers, employees, subsidiaries, afﬁliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out

of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor

is an Equal Opportunity/Afﬁrmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

September 1983

Revised May 2005

MM74HC273 Octal D-Type Flip-Flops with Clear

MM74HC273

Octal D-Type Flip-Flops with Clear

General Descript ion

The MM74HC273 edge triggered flip-flops utilize advanced

silicon-gate CMOS technology to implement D-type flip-

flops. They possess high noise immunity, low power, and

speeds comparable to low power Schottky TTL circuits.

This device contains 8 master-slave flip-flops with a com-

mon clock and common clear. Data on the D input having

the specified setup and hold times is transferred to the Q

output on the LOW-to-HIGH tra nsi tio n of t he C L OCK inp ut.

The CLEAR input when LOW, sets all outputs to a low

state.

Each out put can dr ive 10 lo w power Schottky TT L equiv a-

lent loads. The MM74HC273 is fun ctionally as well as pin

compatible to the 74LS273. All inputs are protected from

damage due to static discharge by diodes to VCC and

ground.

Features

■Typical propagation delay: 18 ns

■Wide operating voltage range

■Low input current: 1

A maximum

■Low quiescent current: 80

A (74 Series)

■Output drive: 10 LS-TTL loads

Ordering Code:

Devices also available in Tape and R eel. Sp ec if y by appending the suffix lett er “X” to the orde ring code.

Connection Diagram

Top View

Order Number Package Number Package Description

MM74HC273WM M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide

MM74HC273SJ M20D 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide

MM74HC273MTC MTC20 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide

MM74HC273N N20A 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide

www.fairchildsemi.com 2

MM74HC273

Truth Table

(Each Flip-Flop)

HIGH Level (St e ady State)

LOW Level (Steady State)

Don’t Care

Tra nsition from LOW-to-HIGH level

The level of Q be fore the indica ted ste ad y state input cond ition s were

established

Logic Diagram

Inputs Outputs

Clear Clock D Q

LXXL

HLXQ

3 www.fairchildsemi.com

MM74HC273

Absolute Maxim um Ratings(Note 1)

(Note 2) Recommended Operating

Conditions

Note 1: Absolute Maximum Ratings are those values beyond which dam-

age to the device may occur.

Note 2: Unl es s ot herwise spe c if ied all voltages are referenced to ground.

Note 3: Power Dis sipation tem perature d erating — plastic “N” pac kage:



12 mW/

C from 65

C to 85

DC Electrical Characteristics (Note 4)

Note 4: For a power supply of 5V

10% the worst case output voltages (VOH, and VOL) occur for HC a t 4.5V. T hus the 4.5V v alues sh ould b e used wh en

designi ng with this s upply. Wo rs t c as e VIH and VIL occur at V CC

5.5V and 4.5V respectively. (The VIH value at 5.5V is 3.85V.) The worst case leakage cur-

rent (IIN, ICC, and I OZ) oc c ur for CMO S at th e higher voltag e and so the 6.0 V v alues should be used .

Supply Voltage (VCC)



0.5 to



7.0V

DC Input Voltage (VIN)



1.5 to VCC



1.5V

DC Output Voltage (VOUT)



0.5 to VCC



0.5V

Clamp Diode Current (IIK, IOK)

20 mA

DC Output Current, per pin (IOUT)

25 mA

DC VCC or GND Current, per pin (ICC)

50 mA

Storage Temperature Range (TSTG)



C to



150

Power Dissipation (PD)

(Note 3) 600 mW

S.O. Package only 500 mW

Lead Temperature (TL)

(Soldering 10 seconds) 260

Min Max Units

Supply Voltage (VCC)26V

DC Input or Output Voltage

(VIN, VOUT)0V

CC V

Operati ng Tem per atu re Ran ge (TA)





Input Rise or Fall Times

(tr, tf) VCC

2.0V 1000 ns

VCC

4.5V 500 ns

VCC

6.0V 400 ns

Symbol Parameter Conditions VCC TA



40 to 85



55 to 125

CUnits

Typ Guaranteed Limits

VIH Minimum HIGH Level 2.0V 1.5 1.5 1.5 V

Input Voltage 4.5V 3.15 3.15 3.15 V

6.0V 4.2 4.2 4.2 V

VIL Maximum LOW Level 2.0V 0.5 0.5 0.5 V

Input Voltage 4.5V 1.35 1.35 1.35 V

6.0V 1.8 1.8 1.8 V

VOH Minimum HIGH Level VIN

VIH or VIL

Output Voltage |IOUT|

A 2.0V 2.0 1.9 1.9 1.9 V

4.5V 4.5 4.4 4.4 4.4 V

6.0V 6.0 5.9 5.9 5.9 V

VIN

VIH or VIL

|IOUT|

4.0 mA 4.5V 4.2 3.98 3.84 3.7 V

|IOUT|

5.2 mA 6.0V 5.7 5.48 5.34 5.2 V

VOL Maximum LOW Level VIN

VIH or VIL

Output Voltage |IOUT|

A 2.0V 0 0.1 0.1 0.1 V

4.5V 0 0.1 0.1 0.1 V

6.0V 0 0.1 0.1 0.1 V

VIN

VIH or VIL

|IOUT|

4 mA 4.5V 0.2 0.26 0.33 0.4 V

|IOUT|

5.2 mA 6.0V 0.2 0.26 0.33 0.4 V

IIN Maxim um Input VIN

VCC or GND 6.0V

0.1

1.0

Current

ICC Maximum Quiescent VIN

VCC or GND 6.0V 8 80 160

Supply Current IOUT

www.fairchildsemi.com 4

MM74HC273

AC Electrical Characteristics

VCC

5V, TA

C, CL

15 pF, tr

6 ns

AC Electrical Characteristics

50 pF, tr

6 ns (unless otherwise specified)

Note 5: CPD determines the no load dy namic powe r c onsumptio n, PD

CPD VCC2f



ICC VCC, and the no load dynamic current consumption,

CPD VCC f



ICC.

Symbol Parameter Conditions Typ Guaranteed Units

Limit

fMAX Maximum Operating Frequency 50 30 MHz

tPHL, tPLH Maximum Propagation 18 27 ns

Delay, Clock to Output

tPHL Maximum Propagation 18 27 ns

Delay, Clear to Output

tREM Minimum Re mova l Time, 10 20 ns

Clear to Clock

tsMinimum Setu p T im e 10 20 ns

Data to Clock

tHMinimum Ho ld T ime



20ns

Clock to Data

tWMinimum Pulse Width 10 16 ns

Clock or Clear

Symbol Parameter Conditions VCC TA



40 to 85



55 to 125

CUnits

Typ Guaranteed Limits

fMAX Maximum Operating 2.0V 16 5 4 3 MHz

Frequency 4.5V 74 27 21 18 MHz

6.0V 78 31 24 20 MHz

tPHL, tPLH Maximum Propagation 2.0V 38 135 170 205 ns

Delay, Clock to Output 4.5V 14 27 34 41 ns

6.0V 12 23 29 35 ns

tPHL Maximum Propagation 2.0V 42 135 170 205 ns

Delay, Clear to Output 4.5V 19 27 34 41 ns

6.0V 18 23 29 35 ns

tREM Minimum Removal Time 2.0V 0 25 32 37 ns

Clear to Clock 4.5V 0 5 6 7 ns

6.0V 0 4 5 6 ns

tsMinimum Setup Time 2.0V 26 100 125 150 ns

Data to Clock 4.5V 7 20 25 30 ns

6.0V 5 17 21 25 ns

tHMinimum Hold Time 2.0V



15 0 0 0 ns

Clock to Data 4.5V



60 0 0 ns

6.0V



40 0 0 ns

tWMinimum Pulse Width 2.0V 34 80 100 120 ns

Clock or Clear 4.5V 11 16 20 24 ns

6.0V 10 14 18 20 ns

tr, tfMaximum Input Rise and 2.0V 1000 1000 1000 ns

Fall Time, Clock 4.5V 500 500 500 ns

6.0V 400 400 400 ns

tTHL, tTLH Maximum Output Rise 2.0V 28 75 95 110 ns

and Fall Time 4.5V 11 15 19 22 ns

6.0V 9 13 16 19 ns

CPD Power Dissipation (per flip-flop) 45 pF

Capacitance (Note 5)

CIN Maximum Input 7 10 10 10 pF

Capacitance

5 www.fairchildsemi.com

MM74HC273

Physical Dim ensions inches (millimeters) unless otherwise noted

20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide

Package Number M20B

www.fairchildsemi.com 6

MM74HC273

Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

20-Lead Small Outline Package (SOP ), EIAJ TYPE II, 5.3mm W ide

Package Number M20D

7 www.fairchildsemi.com

MM74HC273

Physical Dim ensions inches (millimeters) unless otherwise noted (Continued)

20-Lea d Th in S hri nk Sm all Ou tlin e Pack age (TSSOP), JED EC MO-1 53, 4.4mm Wide

Package Number MTC20

www.fairchildsemi.com 8

MM74HC273 Octal D-Type Flip-Flops with C lear

Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide

Package Number N20A

Fairchild does no t assume any responsibility for use of any circui try described, no circuit patent licenses are implied and

Fairchild reserves the right at any time without notice to change said circuitry and specifications.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD

SEMICONDUCTOR CORPORATION. As used herein:

1. Life suppor t de vices o r systems a re devices or syste ms

which, (a) are intended for surgical implant into the

body, or (b) support or sustain life, and (c) whose failure

to perform when properly used in accordance with

instructions for use provided in the labeling, can be rea-

sonably expected to result in a significant injury to the

user.

2. A critical compon ent in any componen t of a life support

device or system whose failure to perform can be rea-

sonabl y ex pect ed to cause the fa ilu re of the lif e su pp ort

device or system, or to affect it s safety or effectiveness.

www.fairchildsemi.com

www.onsemi.com

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent

coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.

ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,

regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or

specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer

application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not

designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification

in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized

application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and

expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such

claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This

literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5817−1050

www.onsemi.com

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada

Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your local

Sales Representative