AQW210HL TESTING PhotoMOS RELAYS GU (General Use) Type 2-Channel (Form A) Current Limit Function Type 6.4 .252 3.2 .126 9.86 .388 9.86 .388 6.4 .252 2.9 .114 mm inch FEATURES 1. Current Limit Function To control an over current from flowing, the current limit function has been realized. It keeps an output current at a constant value when the current reaches a specified current limit value. 2. Enhancing the capability of surge resistance between output terminals The current limit function controls the ON time surge current to enhance the capability of surge resistance between output terminals. 3. Reinforced insulation 5,000 V type More than 0.4 mm internal insulation distance between inputs and outputs. Conforms to EN41003, EN60950 (reinforced insulation). 4. Compact 8-pin DIP size The device comes in a compact (W)6.4 x (L)9.86 x (H) 3.2mm (W).252x (L).388 x (H).126inch, 8-pin DIP size (through hole terminal type) 5. Applicable for 2 Form A use as well as two independent 1 Form A use. 6. Controls low-level analog signals 7. High sensitivity, high speed response. Can control a maximum 0.12 A load current with a 5 mA input current. Fast operation speed of 0.5ms (typ.) 8. Low-level off state leakage current TYPICAL APPLICATIONS * Telephone equipment * Modem TYPES Part No. Output rating* Type I/O isolation voltage Load voltage AC/DC type Reinforced 5,000 V AC 350 V Through hole terminal Load current 120 mA Tube packing style AQW210HL Packing quantity Surface-mount terminal AQW210HLA Tape and reel packing style Picked from the Picked from the 1/2/3/4-pin side 5/6/7/8-pin side AQW210HLAX AQW210HLAZ Tube Tape and reel 1 tube contains 40 pcs. 1 batch contains 400 pcs. 1,000 pcs. *Indicate the peak AC and DC values. Note: For space reasons, the SMD terminal shape indicator "A" and the package type indicator "X" and "Z" are omitted from the seal. RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Item LED forward current LED reverse voltage Input Peak forward current Power dissipation Load voltage (peak AC) Output Continuous load current Power dissipation Total power dissipation I/O isolatiom voltage Operating Temperature limits Storage Symbol IF VR IFP Pin VL IL Pout PT Viso Topr Tstg AQW210HL(A) 50 mA 3V 1A 75 mW 350 V 0.12 A 800 mW 850 mW 5,000 V AC -40C to +85C -40F to +185F -40C to +100C -40F to +212F Remarks f = 100 Hz, Duty factor = 0.1% Non-condensing at low temperatures 517 AQW210HL 2. Electrical characteristics (Ambient temperature: 25C 77F) Item Symbol Typical Maximum Minimum Typical Minimum Typical LED operate current LED turn off current Input LED dropout voltage IFon IFoff VF AQW210HL(A) 1.2 mA 3.0 mA 0.4 mA 1.1 mA 1.14 (1.25 V at IF = 50mA) 1.5 V Condition 20 IF = 5 mA IL = Max. Within 1 s on time IF = 0 VL = Max. IF = 5 mA Typical On resistance Ron Off state leakage current Current limit Turn on time* Transfer characteristics Turn off time* I/O capacitance Maximum ILeak 1A Typical Typical Maximum Typical Maximum Typical Maximum -- 0.18 A 0.5 ms 2.0 ms 0.08 ms 1.0 ms 0.8 pF 1.5 pF Initial I/O isolation resistance Minimum IL = Max. IF = 5 mA 25 Maximum Output IL = Max. Ton Toff Ciso IF = 5 mA IL = Max. IF = 5 mA IL = Max. f = 1 MHz VB = 0 1,000 M Riso 500 V DC Note: Recommendable LED forward current IF= 5 to 10 mA. For type of connection *Turn on/Turn off time Input 90% 10% Output Ton Toff For Dimensions, see Page 440. For Schematic and Wiring Diagrams, see Page 445. For Cautions for Use, see Page 449. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Turn on time vs. ambient temperature characteristics Allowable ambient temperature: -40C to +85C -40F to +185F Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Load voltage: Max. (DC) Continuous load current: Max.(DC) LED current: 5 mA; Load voltage: Max.(DC); Continuous load current: Max.(DC) 50 150 100 3 2.5 40 Turn on time, ms On resistance, Load current, mA 200 30 20 2 1.5 1 50 10 0 -40 -20 0 20 40 60 80 85 100 Ambient temperature, C 518 0 0.5 -40 -20 0 20 40 60 80 85 Ambient temperature, C 0 -40 -20 0 20 40 60 80 85 Ambient temperature, C AQW210HL 4. Turn off time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics 6. LED turn off current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max.(DC); Continuous load current: Max.(DC) Load voltage: Max.(DC); Continuous load current: Max.(DC) Load voltage: Max.(DC); Continuous load current: Max.(DC) 5 Turn off time, ms 0.25 0.2 0.15 0.1 4 3 2 -40 -20 0 20 40 60 0 80 85 -40 -20 2 0 0 20 40 60 80 85 Ambient temperature, C 7. LED dropout voltage vs. ambient temperature characteristics 8. Voltage vs. current characteristics of output at MOS portion LED current: 5 to 50 mA Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F 140 120 100 80 60 40 20 -5 -4 -3 -2 -1 1.4 1.3 1.2 1 2 3 4 -20 Voltage, V -40 -60 -80 -100 -120 -140 50mA 30mA 20mA 10mA 5mA 1.1 1.0 -40 -20 0 20 40 60 80 85 Ambient temperature, C 5 -40 -20 0 20 40 60 80 85 Ambient temperature, C 9. Off state leakage current Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F Off state leakage current, A Current, mA 1.5 LED dropout voltage, V 3 1 Ambient temperature, C 0 4 1 0.05 0 5 LED turn off current, mA LED operate current, mA 0.3 10 10 10 10 -3 -6 -9 -12 0 20 40 60 80 100 Load voltage, V 10. LED forward current vs. turn on time characteristics 11. LED forward current vs. turn off time characteristics 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max.(DC); Continuous load current: Max.(DC); Ambient temperature: 25C 77F Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max.(DC); Continuous load current: Max.(DC); Ambient temperature: 25C 77F Measured portion: between terminals 5 and 6, 7 and 8; Frequency: 1 MHz; Ambient temperature: 25C 77F 3 50 Output capacitance, pF 0.2 Turn off time, ms Turn on time, ms 2.5 2 1.5 0.15 0.1 1 0.05 10 20 30 40 50 60 LED forward current, mA 0 0 30 20 10 0.5 0 40 10 20 30 40 50 0 60 0 10 20 30 40 50 Applied voltage, V LED forward current, mA What is current limit 9/1/2000 stream of the PhotoMOS relay against over-current. But, if the current-limiting feature is used longer than the specified time, the PhotoMOS relay can be destroyed. Therefore, set the output loss to the max. rate or less. * Comparison of output voltage and output current characteristics V-I Characteristics Output current When a load current reaches the specified output control current, a current limit function works against the load current to keep the current a constant value. The current limit circuit built into the PhotoMOS relay thus controls the instantaneous load current to effectively ensure circuit safety. This safety feature protects circuits down- Output voltage All Rights Reserved, (c) Copyright Matsushita Electric Works, 519 Ltd. Go To Online Catalog