DF20 Series●1mm Pitch Double Rows Low Profile Wire-to-Board Connectors
B267
■Product Specifications
Rating
Rated current
Rated voltage
28 AWG : 1A
30 AWG : 0.9A
32 AWG : 0.7A
100V AC
Operating temperature range
Operating humidity range
Storage temperature range
Storage humidity range
-35°C to 85°C (Note 1,2)
-40% to 80%
-10°C to 60°C (Note 2)
-40% to 70%
Note1 : Includes temperature rise caused by current flow.
Note2 : The term “storage” refers to products stored for long periods of time prior to mounting and use.
Note2 : Operating temperature range and Humidity range covers non-conducting conditions of installed connectors in storage,
Note2 : shipment or transportation.
Note3 : Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and
specifications for a specific part number shown.
DF20 # - *DS - 1 C
Series name : DF20
Boss Type
■Pin header
■F : Without boss
■G : With boss
■Crimp socket: A
1
Number of contacts : 10, 20, 30, 40, 50
2
3
4
5
Connector type
DS: Double-row socket
DP: Double-row pin header
Contact pitch: 1 mm
Type of housing, header
C: Crimp housing
V: Straight SMT header
H: Right angle SMT header
●Connectors
●Contacts
7
6
F
Applicable wire size
2830 : 28 to 30 AWG
3032 : 30 to 32 AWG
Contact & packaging type
SCF : Socket contact reel
Plating type
A : Gold plating
Packaging Specifications
04 : 1 reel = 10,000 pieces
44 : 1 reel = 20,000 pieces
DF20 F - 2830 SCF A ( **)
3
3
1
1
2
2
4
4
Measured at 100V DC
Conduction of 300V AC applied for 1 minute
Measure at 100mA.
Measured with a steel pin of 0.2 ±0.005 thickness
Frequency of 10 to 55 Hz, single amplitude of 0.75 mm, in 3 directions for 2hours
Temperature of 40±2ç, humidity of 90% to 95%, left standing for 96 hours
(-55ç : 30min /5çto 35ç : 2 to 3min /85ç : 30min /5çto 35ç : 2 to 3min ) for 5 cycles
50 cycles
Reflow : At the recommended temperature profile, manual
solder : Soldering iron temperature of 300°C for 3 seconds
500Mømin.
No flashover or insulation breakdown
30Mømax.
0.2 N Min., 2 N Max.
No electrical discontinuity of 1µs min.
Contact resistance of 30mømax., insulation resistance of 100Mømin.
Contact resistance of
30mø
max
,insulation resistance of 500Mømin.
Contact resistance of 30mø max.
No deformation of the insulator parts that will
affect performance
1.
Insulation resistance
2.
Withstanding voltage
3.
Contact resistance
4.
Insertion-Extraction force
4.
(per contact)
5.Vibration
6.Humidity
7.
Temperature cycle
8.
Mechanical operation
9.Resistance to
Soldering heat
Item Specifications Conditions
1 3 52 4 6
■Materials / Finish Remarks
UL94V-0
----------
UL94V-0
----------
----------
Item Part Material Finish
Socket
Socket contact
Pin header
Insulator
Contact
Insulator
Contact
Metal Fitting
Polyamide
Phosphor bronze
Polyamide
Phosphor bronze
Brass
Color : Beige
Gold plating
Color : Beige
Gold plating
Tin-Copper plating
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
■Product Number Structure
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.