Aluminum electrolytic capacitors Snap-in capacitors Series/Type: B43543 Date: December 2010 (c) EPCOS AG 2010. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Snap-in capacitors B43543 Outstanding ripple current, ultra compact 105 C Long-life grade capacitors Applications Frequency converters Professional power supplies in industrial electronics and in data processing equipment Switch-mode power supplies in entertainment electronics Features Outstanding ripple current capability Very high CV product, ultra compact High reliability Extremely improved performance at high frequencies Outstanding low ESR at operating conditions above 50 C Optimized internal thermal resistance Different case sizes available for each capacitance value Capacitors with all insulation versions pass the needle flame test according to IEC 60695-11-5 for all flame exposure times up to 120 s RoHS-compatible Construction Charge/discharge-proof, polar Aluminum case, fully insulated with PVC Version with PET insulation available Version with additional PET insulation cap on terminal side available for insulating the capacitor from the PCB Snap-in solder pins to hold component in place on PC-board Minus pole marking on case surface Minus pole not insulated from case Overload protection by safety vent on the case wall Terminals Standard version with 2 terminals, 2 lengths available: 6.3 and 4.5 mm 3 terminals to ensure correct insertion: length 4.5 mm Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 19 B43543 Outstanding ripple current, ultra compact 105 C Specifications and characteristics in brief Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance Dissipation factor tan (20 C, 120 Hz) 200 ... 450 V DC 1.15 VR (for VR 250 V DC) 1.10 VR (for VR 400 V DC) 100 ... 2700 F 20% M VR 400 V DC: tan 0.15 VR = 450 V DC: tan 0.20 Leakage current Ileak (5 min, 20 C) Self-inductance ESL Useful life 105 C; VR; IAC,R 85 C; VR; IAC,max 40 C; VR; 2.05 IAC,R Load life test 105 C; VR; IAC,R Approx. 20 nH > 3000 h > 7000 h > 250000 h 2000 h Voltage endurance test 105 C; VR 2000 h Vibration resistance test Characteristics at low temperature Requirements: C/C 30% of initial value tan 3 times initial specified limit Ileak initial specified limit Post test requirements C/C 20% of initial value tan 2 times initial specified limit Ileak initial specified limit Post test requirements: C/C 10% of initial value tan 1.3 times initial specified limit Ileak initial specified limit To IEC 60068-2-6, test Fc: Frequency range 10 Hz ... 55 Hz, displacement amplitude 0.35 mm, acceleration max. 5 g, duration 3 x 2 h. Capacitor mounted by its body which is rigidly clamped to the work surface. Max. impedance ratio at 100 Hz VR 400 V Z -25 C / Z 20 C 3 Z -40 C / Z 20 C 7 450 V 7 12 IEC climatic category To IEC 60068-1: VR 400 V DC: 40/105/56 (40 C/+105 C/56 days damp heat test) VR = 450 V DC: 25/105/56 (25 C/+105 C/56 days damp heat test) The capacitors can be operated in the temperature range of 40 C to +85 C but the impedance at 40 C should be taken into consideration. Detail specification Sectional specification Similar to CECC 30301-809 IEC 60384-4 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 19 B43543 Outstanding ripple current, ultra compact 105 C Dimensional drawings Snap-in capacitors with standard insulation (PVC or PET) Snap-in terminals, length (6.3 1) mm. Also available in a shorter version with a length of (4.5 1) mm. PET insulation is marked with label "PET" on the sleeve. Snap-in capacitors are also available with 3 terminals (length (4.5 1) mm). PET insulation is marked with label "PET" on the sleeve. Dimensions (mm) d +1 l 2 25 25 25 30 25 35 25 40 25 45 25 50 25 55 Dimensions (mm) d +1 l 2 30 25 30 30 30 35 30 40 30 45 30 50 30 55 35 25 35 30 35 35 35 40 35 45 35 50 35 55 Approx. weight (g) Packing units (pcs.) 13 17 19 22 25 29 32 130 130 130 130 130 130 130 Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 19 Approx. weight (g) Packing units (pcs.) 17 23 29 36 41 46 53 22 29 36 41 56 70 81 80 80 80 80 80 80 80 60 60 60 60 60 60 60 B43543 Outstanding ripple current, ultra compact 105 C Snap-in capacitors with PVC insulation and PET insulation cap on terminal side Snap-in terminals, length (6.3 +1/1.4) mm. Also available in a shorter version with a length of (4.5 1.4) mm. PET insulation cap is positioned under the insulation sleeve. Snap-in capacitors are also available with 3 terminals (length (4.5 1.4) mm). PET insulation cap is positioned under the insulation sleeve. Dimensions (mm) d +1.4 l +2.2/2 25 25 25 30 25 35 25 40 25 45 25 50 25 55 Dimensions (mm) d +1.4 l +2.2/2 30 25 30 30 30 35 30 40 30 45 30 50 30 55 35 25 35 30 35 35 35 40 35 45 35 50 35 55 Approx. Packing weight (g) units (pcs.) 13 17 19 22 25 29 32 Please read Cautions and warnings and Important notes at the end of this document. 130 130 130 130 130 130 130 Page 5 of 19 Approx. Packing weight (g) units (pcs.) 17 23 29 36 41 46 53 22 29 36 41 56 70 81 80 80 80 80 80 80 80 60 60 60 60 60 60 60 B43543 Outstanding ripple current, ultra compact 105 C Packing of snap-in capacitors For ecological reasons the packing is pure cardboard. Components can be withdrawn (in full or in part) in the correct position for insertion. Ordering codes for terminal styles and insulation features Identification in 3rd block of ordering code Snap-in capacitors Terminal version Insulation version PVC PET PVC plus PET cap Standard terminals 6.3 mm M000 M060 M080 Short terminals 4.5 mm M007 M067 M087 3 terminals 4.5 mm M002 M062 M082 Ordering examples: B43543A5107M007 B43543A5107M062 B43543A5107M080 } } } snap-in capacitor with short terminals and standard PVC insulation snap-in capacitor with 3 terminals and PET insulation snap-in capacitor with standard terminals and PVC insulation with additional PET insulation cap on terminal side Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 19 B43543 Outstanding ripple current, ultra compact 105 C Overview of available types VR (V DC) 200 250 400 450 Case dimensions d x l (mm) CR (F) 25 x 25 100 120 25 x 25 25 x 30 150 25 x 30 25 x 35 30 x 25 180 25 x 35 30 x 25 25 x 40 30 x 30 35 x 25 220 25 x 40 30 x 30 25 x 45 30 x 35 35 x 30 270 25 x 45 30 x 35 35 x 25 25 x 50 30 x 40 35 x 30 25 x 25 25 x 50 30 x 35 35 x 30 30 x 45 35 x 35 330 390 25 x 25 25 x 30 25 x 55 30 x 40 35 x 35 30 x 50 35 x 40 470 25 x 30 25 x 30 30 x 25 30 x 45 35 x 40 30 x 55 35 x 45 560 25 x 30 25 x 35 30 x 30 30 x 55 35 x 40 35 x 50 680 25 x 35 30 x 25 25 x 40 30 x 30 35 x 25 35 x 50 820 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 35 x 55 1000 25 x 45 30 x 35 35 x 30 25 x 55 30 x 40 35 x 35 1200 25 x 50 30 x 40 35 x 30 30 x 45 35 x 35 Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 19 B43543 Outstanding ripple current, ultra compact 105 C VR (V DC) 200 250 400 450 Case dimensions d x l (mm) CR (F) 1500 30 x 45 35 x 35 30 x 55 35 x 40 1800 30 x 50 35 x 40 35 x 50 2200 30 x 55 35 x 45 35 x 55 2700 35 x 55 The capacitance and voltage ratings listed above are available in different cases upon request. Other voltage and capacitance ratings are also available upon request. Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 19 B43543 Outstanding ripple current, ultra compact 105 C Technical data and ordering codes CR 100 Hz 20 C F Case dimensions dxl mm VR = 200 V DC 390 25 x 25 470 25 x 30 560 25 x 30 680 25 x 35 680 30 x 25 820 25 x 40 820 30 x 30 820 35 x 25 1000 25 x 45 1000 30 x 35 1000 35 x 30 1200 25 x 50 1200 30 x 40 1200 35 x 30 1500 30 x 45 1500 35 x 35 1800 30 x 50 1800 35 x 40 2200 30 x 55 2200 35 x 45 2700 35 x 55 VR = 250 V DC 330 25 x 25 390 25 x 30 470 25 x 30 470 30 x 25 560 25 x 35 560 30 x 30 680 25 x 40 ESRtyp 100 Hz 20 C m ESRtyp 300 Hz 60 C m Zmax 10 kHz 20 C m IAC,max 100 Hz 60 C A IAC,max 100 Hz 85 C A IAC,R1) Ordering code 100 Hz (composition see 105 C below) A 220 180 150 120 120 100 100 100 85 80 85 70 65 70 50 55 45 50 36 40 32 100 80 65 55 45 45 40 50 38 32 40 32 26 34 20 26 17 22 14 18 15 270 230 190 160 150 130 120 140 110 100 110 90 85 100 65 75 55 65 45 50 45 3.36 3.86 4.22 4.84 5.19 5.51 5.96 5.60 6.28 6.85 6.88 7.08 8.27 7.53 9.55 8.75 10.7 9.92 12.2 11.3 13.2 2.58 2.97 3.24 3.72 3.99 4.23 4.58 4.30 4.83 5.26 5.29 5.44 6.36 5.79 7.34 6.73 8.27 7.63 9.38 8.70 10.1 1.19 1.37 1.50 1.72 1.84 1.96 2.12 1.99 2.23 2.43 2.44 2.52 2.94 2.68 3.39 3.11 3.83 3.53 4.34 4.02 4.70 B43543A2397M0*# B43543A2477M0*# B43543A2567M0*# B43543A2687M0*# B43543B2687M0*# B43543A2827M0*# B43543B2827M0*# B43543C2827M0*# B43543A2108M0*# B43543B2108M0*# B43543C2108M0*# B43543A2128M0*# B43543B2128M0*# B43543C2128M0*# B43543A2158M0*# B43543B2158M0*# B43543A2188M0*# B43543B2188M0*# B43543A2228M0*# B43543B2228M0*# B43543A2278M0*# 210 180 150 140 120 120 100 95 80 65 55 55 45 45 260 220 180 170 150 140 130 3.27 3.73 4.09 4.51 4.65 5.15 5.31 2.51 2.86 3.14 3.46 3.57 3.96 4.08 1.16 1.32 1.45 1.60 1.65 1.83 1.89 B43543E2337M0*# B43543E2397M0*# B43543E2477M0*# B43543F2477M0*# B43543E2567M0*# B43543F2567M0*# B43543E2687M0*# Composition of ordering code * = Insulation feature #= 0 = PVC insulation 6 = PET insulation 8 = PVC insulation with additional PET insulation cap on terminal side Terminal style 0 = snap-in standard terminals (6.3 mm) 2 = snap-in 3 terminals (4.5 mm) 7 = snap-in short terminals (4.5 mm) 1) 120-Hz conversion factor of ripple current: IAC (120 Hz) = 1.03 IAC (100 Hz) Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 19 B43543 Outstanding ripple current, ultra compact 105 C Technical data and ordering codes CR 100 Hz 20 C F Case dimensions dxl mm VR = 250 V DC 680 30 x 30 680 35 x 25 820 25 x 45 820 30 x 35 820 35 x 30 1000 25 x 55 1000 30 x 40 1000 35 x 35 1200 30 x 45 1200 35 x 35 1500 30 x 55 1500 35 x 40 1800 35 x 50 2200 35 x 55 VR = 400 V DC 120 25 x 25 150 25 x 30 180 25 x 35 180 30 x 25 220 25 x 40 220 30 x 30 270 25 x 45 270 30 x 35 270 35 x 25 330 25 x 50 330 30 x 35 330 35 x 30 390 25 x 55 390 30 x 40 ESRtyp 100 Hz 20 C m ESRtyp 300 Hz 60 C m Zmax 10 kHz 20 C m IAC,max 100 Hz 60 C A IAC,max 100 Hz 85 C A IAC,R2) Ordering code 100 Hz (composition see 105 C below) A 100 100 85 80 85 70 65 70 55 60 45 45 40 32 40 45 38 32 40 30 26 32 22 26 17 22 18 15 120 130 110 100 110 85 80 90 65 75 55 60 50 40 5.68 5.41 6.02 6.49 6.61 7.02 7.90 7.59 8.93 8.32 10.5 9.62 11.1 12.6 4.36 4.16 4.63 4.98 5.08 5.40 6.07 5.83 6.86 6.39 8.10 7.39 8.59 9.74 2.02 1.92 2.14 2.31 2.35 2.50 2.81 2.70 3.17 2.96 3.75 3.42 3.97 4.51 B43543F2687M0*# B43543G2687M0*# B43543E2827M0*# B43543F2827M0*# B43543G2827M0*# B43543E2108M0*# B43543F2108M0*# B43543G2108M0*# B43543E2128M0*# B43543F2128M0*# B43543E2158M0*# B43543F2158M0*# B43543E2188M0*# B43543E2228M0*# 540 430 360 320 290 260 240 210 220 200 180 180 170 150 170 140 110 110 90 85 75 70 75 60 55 65 50 50 630 510 420 380 350 310 280 250 260 230 210 210 200 180 2.22 2.60 2.97 3.03 3.41 3.50 3.90 4.04 3.89 4.43 4.47 4.78 4.95 5.36 1.71 2.00 2.28 2.33 2.62 2.69 2.99 3.10 2.99 3.41 3.43 3.67 3.80 4.12 0.79 0.92 1.05 1.07 1.21 1.24 1.38 1.43 1.38 1.57 1.59 1.70 1.76 1.90 B43543A9127M0*# B43543A9157M0*# B43543A9187M0*# B43543B9187M0*# B43543A9227M0*# B43543B9227M0*# B43543A9277M0*# B43543B9277M0*# B43543C9277M0*# B43543A9337M0*# B43543B9337M0*# B43543C9337M0*# B43543A9397M0*# B43543B9397M0*# Composition of ordering code * = Insulation feature #= 0 = PVC insulation 6 = PET insulation 8 = PVC insulation with additional PET insulation cap on terminal side Terminal style 0 = snap-in standard terminals (6.3 mm) 2 = snap-in 3 terminals (4.5 mm) 7 = snap-in short terminals (4.5 mm) 2) 120-Hz conversion factor of ripple current: IAC (120 Hz) = 1.03 IAC (100 Hz) Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 19 B43543 Outstanding ripple current, ultra compact 105 C Technical data and ordering codes CR 100 Hz 20 C F Case dimensions dxl mm VR = 400 V DC 390 35 x 35 470 30 x 45 470 35 x 40 560 30 x 55 560 35 x 40 680 35 x 50 820 35 x 55 VR = 450 V DC 100 25 x 25 120 25 x 30 150 25 x 35 150 30 x 25 180 25 x 40 180 30 x 30 180 35 x 25 220 25 x 45 220 30 x 35 220 35 x 30 270 25 x 50 270 30 x 40 270 35 x 30 330 30 x 45 330 35 x 35 390 30 x 50 390 35 x 40 470 30 x 55 470 35 x 45 560 35 x 50 ESRtyp 100 Hz 20 C m ESRtyp 300 Hz 60 C m Zmax 10 kHz 20 C m IAC,max 100 Hz 60 C A IAC,max 100 Hz 85 C A IAC,R3) Ordering code 100 Hz (composition see 105 C below) A 150 120 130 100 110 85 70 55 40 45 34 38 30 26 180 150 150 120 130 110 85 5.40 6.07 6.14 6.99 6.70 7.83 8.82 4.15 4.66 4.72 5.37 5.15 6.01 6.78 1.92 2.16 2.18 2.48 2.38 2.78 3.13 B43543C9397M0*# B43543A9477M0*# B43543B9477M0*# B43543A9567M0*# B43543B9567M0*# B43543A9687M0*# B43543A9827M0*# 1120 940 750 680 620 560 570 510 460 470 420 380 380 310 310 260 260 220 220 180 270 230 180 170 150 150 150 120 120 130 100 100 100 80 85 65 70 55 60 50 1620 1350 1080 970 900 810 830 740 670 680 600 540 550 450 450 380 380 310 320 270 1.97 2.26 2.64 2.67 2.99 3.06 3.09 3.42 3.52 3.80 3.89 4.30 4.21 4.91 4.84 5.49 5.44 6.18 6.16 6.91 1.51 1.74 2.02 2.05 2.30 2.35 2.37 2.62 2.71 2.92 2.99 3.31 3.23 3.77 3.72 4.22 4.18 4.75 4.73 5.31 0.70 0.80 0.93 0.95 1.06 1.09 1.10 1.21 1.25 1.35 1.38 1.53 1.49 1.74 1.72 1.95 1.93 2.20 2.19 2.46 B43543A5107M0*# B43543A5127M0*# B43543A5157M0*# B43543B5157M0*# B43543A5187M0*# B43543B5187M0*# B43543C5187M0*# B43543A5227M0*# B43543B5227M0*# B43543C5227M0*# B43543A5277M0*# B43543B5277M0*# B43543C5277M0*# B43543A5337M0*# B43543B5337M0*# B43543A5397M0*# B43543B5397M0*# B43543A5477M0*# B43543B5477M0*# B43543A5567M0*# Composition of ordering code * = Insulation feature #= 0 = PVC insulation 6 = PET insulation 8 = PVC insulation with additional PET insulation cap on terminal side Terminal style 0 = snap-in standard terminals (6.3 mm) 2 = snap-in 3 terminals (4.5 mm) 7 = snap-in short terminals (4.5 mm) 3) 120-Hz conversion factor of ripple current: IAC (120 Hz) = 1.03 IAC (100 Hz) Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 19 B43543 Outstanding ripple current, ultra compact 105 C Useful life depending on ambient temperature TA under ripple current operating conditions1) Frequency factor of permissible ripple current IAC versus frequency f Frequency characteristics of ESR Typical behavior 1) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life graphs. Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 19 B43543 Outstanding ripple current, ultra compact 105 C Impedance Z versus frequency f Typical behavior at 20 C Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 19 B43543 Outstanding ripple current, ultra compact 105 C Cautions and warnings Personal safety The electrolytes used by EPCOS have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide (DMAC). Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They contain flame-retarding substances which will quickly extinguish any flame that may have been ignited. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. However, the amount of dangerous materials used in our products has been limited to an absolute minimum. Nevertheless, the following rules should be observed when handling aluminum electrolytic capacitors: Any escaping electrolyte should not come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected parts immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water. Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 19 B43543 Outstanding ripple current, ultra compact 105 C Product safety The table below summarizes the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information". Topic Safety information Polarity Make sure that polar capacitors are connected with the right polarity. Reverse voltage Voltages polarity classes should be prevented by connecting a diode. Do not exceed the upper category temperature. Upper category temperature Maintenance Mounting position of screwterminal capacitors Mounting of single-ended capacitors Robustness of terminals Soldering Make periodic inspections of the capacitors. Before the inspection, make sure that the power supply is turned off and carefully discharge the electricity of the capacitors. Do not apply any mechanical stress to the capacitor terminals. Do not mount the capacitor with the terminals (safety vent) upside down. Reference chapter "General technical information" 1 "Basic construction of aluminum electrolytic capacitors" 3.1.6 "Reverse voltage" 7.2 "Maximum permissible operating temperature" 10 "Maintenance" 11.1. "Mounting positions of capacitors with screw terminals" The internal structure of single-ended capacitors 11.4 might be damaged if excessive force is applied to "Mounting the lead wires. considerations for Avoid any compressive, tensile or flexural stress. single-ended capacitors" Do not move the capacitor after soldering to PC board. Do not pick up the PC board by the soldered capacitor. Do not insert the capacitor on the PC board with a hole space different to the lead space specified. The following maximum tightening torques must 11.3 not be exceeded when connecting screw "Mounting torques" terminals: M5: 2 Nm M6: 2.5 Nm Do not exceed the specified time or temperature 11.5 limits during soldering. "Soldering" Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 19 B43543 Outstanding ripple current, ultra compact 105 C Topic Soldering, cleaning agents Passive flammability Active flammability Safety information Reference chapter "General technical information" Do not allow halogenated hydrocarbons to come 11.6 into contact with aluminum electrolytic capacitors. "Cleaning agents" Avoid external energy, such as fire or electricity. 8.1 "Passive flammability" Avoid overload of the capacitors. 8.2 "Active flammability" Breakdown strength Do not damage the insulating sleeve, especially of insulating when ring clips are used for mounting. sleeves Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 19 Reference chapter "Capacitors with screw terminals" "Screw terminals accessories" B43543 Outstanding ripple current, ultra compact 105 C Symbols and terms Symbol English German C CR CS CS,T Cf d dmax ESL ESR ESRf Capacitance Rated capacitance Series capacitance Series capacitance at temperature T Capacitance at frequency f Case diameter, nominal dimension Maximum case diameter Self-inductance Equivalent series resistance Equivalent series resistance at frequency f Equivalent series resistance at temperature T Frequency Current Alternating current (ripple current) Root-mean-square value of alternating current Ripple current at frequency f Maximum permissible ripple current Rated ripple current Rated ripple current for base cooling Leakage current Operating leakage current Case length, nominal dimension Maximum case length (without terminals and mounting stud) Resistance Insulation resistance Balancing resistance Temperature Temperature difference Ambient temperature Case temperature Capacitor base temperature Time Period Service life (operating hours) Kapazitat Nennkapazitat Serienkapazitat Serienkapazitat bei Temperatur T Kapazitat bei Frequenz f Gehausedurchmesser, Nennma Maximaler Gehausedurchmesser Eigeninduktivitat Ersatzserienwiderstand Ersatzserienwiderstand bei Frequenz f ESRT f I IAC IAC,rms IAC,f IAC,max IAC,R IAC,R (B) Ileak Ileak,op l lmax R Rins Rsymm T T TA TC TB t t tb Please read Cautions and warnings and Important notes at the end of this document. Ersatzserienwiderstand bei Temperatur T Frequenz Strom Wechselstrom Wechselstrom, Effektivwert Wechselstrom bei Frequenz f Maximal zulassiger Wechselstrom Nennwechselstrom Nennwechselstromstrom fur Bodenkuhlung Reststrom Betriebsreststrom Gehauselange, Nennma Maximale Gehauselange (ohne Anschlusse und Gewindebolzen) Widerstand Isolationswiderstand Symmetrierwiderstand Temperatur Temperaturdifferenz Umgebungstemperatur Gehausetemperatur Temperatur des Becherbodens Zeit Zeitraum Brauchbarkeitsdauer (Betriebszeit) Page 17 of 19 B43543 Outstanding ripple current, ultra compact 105 C Symbol V VF Vop VR VS XC XL Z ZT tan 0 r English Voltage Forming voltage Operating voltage Rated voltage, DC voltage Surge voltage Capacitive reactance Inductive reactance Impedance Impedance at temperature T Dissipation factor Failure rate Absolute permittivity Relative permittivity Angular velocity; 2 f German Spannung Formierspannung Betriebsspannung Nennspannung, Gleichspannung Spitzenspannung Kapazitiver Blindwiderstand Induktiver Blindwiderstand Scheinwiderstand Scheinwiderstand bei Temperatur T Verlustfaktor Ausfallrate Elektrische Feldkonstante Dielektrizitatszahl Kreisfrequenz; 2 f Note All dimensions are given in mm. Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 19 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKK, MKD, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 19 of 19