1. Product profile
1.1 General description
PNP/PNP matched double transistors in small Surface-Mounted Device (SMD) plastic
packages. The transistors are fully isolated internally.
1.2 Features
nCurrent gain matching
nBase-emitter voltage matching
nDrop-in replacement for standard double transistors
nAEC-Q101 qualified
1.3 Applications
nCurrent mirror
nDifferential amplifier
1.4 Quick reference data
BCM856BS; BCM856BS/DG
BCM856DS; BCM856DS/DG
PNP/PNP matched double transistors
Rev. 01 — 7 August 2008 Product data sheet
Table 1. Product overview
Type number Package Package configuration
Nexperia JEITA
BCM856BS SOT363 SC-88 very small
BCM856BS/DG
BCM856DS SOT457 SC-74 small
BCM856DS/DG
Table 2. Quick reference data
Symbol Parameter Conditions Min Typ Max Unit
Per transistor
VCEO collector-emitter voltage open base - - 65 V
ICcollector current - - 100 mA
hFE DC current gain VCE =5V;
IC=2mA 200 290 450
BCM856BS_BCM856DS_1
Product data sheet Rev. 01 — 7 August 2008 2 of 14
Nexperia BCM856BS; BCM856DS
PNP/PNP matched double transistors
[1] The smaller of the two values is taken as the numerator.
[2] The smaller of the two values is subtracted from the larger value.
2. Pinning information
3. Ordering information
Per device
hFE1/hFE2 hFE matching VCE =5V;
IC=2mA [1] 0.9 1 -
VBE1VBE2 VBE matching VCE =5V;
IC=2mA [2] --2mV
Table 2. Quick reference data
…continued
Symbol Parameter Conditions Min Typ Max Unit
Table 3. Pinning
Pin Description Simplified outline Graphic symbol
1 emitter TR1
2 base TR1
3 collector TR2
4 emitter TR2
5 base TR2
6 collector TR1
001aab555
6 45
1 32
sym018
2
13
5
6
TR1 TR2
4
Table 4. Ordering information
Type number Package
Name Description Version
BCM856BS SC-88 plastic surface-mounted package; 6 leads SOT363
BCM856BS/DG
BCM856DS SC-74 plastic surface-mounted package (TSOP6); 6 leads SOT457
BCM856DS/DG
© Nexperia B.V. 2017. All rights reserved
BCM856BS_BCM856DS_1
Product data sheet Rev. 01 — 7 August 2008 3 of 14
Nexperia BCM856BS; BCM856DS
PNP/PNP matched double transistors
4. Marking
[1] * = -: made in Hong Kong
* = p: made in Hong Kong
* = t: made in Malaysia
* = W: made in China
5. Limiting values
[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
Table 5. Marking codes
Type number Marking code[1]
BCM856BS *BS
BCM856BS/DG PB*
BCM856DS DS
BCM856DS/DG R9
Table 6. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
Per transistor
VCBO collector-base voltage open emitter - 80 V
VCEO collector-emitter voltage open base - 65 V
VEBO emitter-base voltage open collector - 5V
ICcollector current - 100 mA
ICM peak collector current single pulse;
tp1ms -200 mA
Ptot total power dissipation Tamb 25 °C
BCM856BS (SOT363)
BCM856BS/DG (SOT363) [1] - 200 mW
BCM856DS (SOT457)
BCM856DS/DG (SOT457) [1] - 250 mW
Per device
Ptot total power dissipation Tamb 25 °C
BCM856BS (SOT363)
BCM856BS/DG (SOT363) [1] - 300 mW
BCM856DS (SOT457)
BCM856DS/DG (SOT457) [1] - 380 mW
Tjjunction temperature - 150 °C
Tamb ambient temperature 55 +150 °C
Tstg storage temperature 65 +150 °C
© Nexperia B.V. 2017. All rights reserved
BCM856BS_BCM856DS_1
Product data sheet Rev. 01 — 7 August 2008 4 of 14
Nexperia BCM856BS; BCM856DS
PNP/PNP matched double transistors
6. Thermal characteristics
[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
7. Characteristics
Table 7. Thermal characteristics
Symbol Parameter Conditions Min Typ Max Unit
Per transistor
Rth(j-a) thermal resistance from junction to
ambient in free air
BCM856BS (SOT363)
BCM856BS/DG (SOT363) [1] - - 625 K/W
BCM856DS (SOT457)
BCM856DS/DG (SOT457) [1] - - 500 K/W
Per device
Rth(j-a) thermal resistance from junction to
ambient in free air
BCM856BS (SOT363)
BCM856BS/DG (SOT363) [1] - - 416 K/W
BCM856DS (SOT457)
BCM856DS/DG (SOT457) [1] - - 328 K/W
Table 8. Characteristics
T
amb
=25
°
C unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
Per transistor
ICBO collector-base cut-off
current VCB =30 V;
IE=0A --15 nA
VCB =30 V;
IE=0A;
Tj= 150 °C
--5µA
IEBO emitter-base cut-off
current VEB =5V;
IC=0A --100 nA
hFE DC current gain VCE =5V;
IC=10 µA- 250 -
VCE =5V;
IC=2mA 200 290 450
VCEsat collector-emitter
saturation voltage IC=10 mA;
IB=0.5 mA -50 200 mV
IC=100 mA;
IB=5mA -200 400 mV
VBEsat base-emitter saturation
voltage IC=10 mA;
IB=0.5 mA [1] -760 - mV
IC=100 mA;
IB=5mA [1] -920 - mV
© Nexperia B.V. 2017. All rights reserved
BCM856BS_BCM856DS_1
Product data sheet Rev. 01 — 7 August 2008 5 of 14
Nexperia BCM856BS; BCM856DS
PNP/PNP matched double transistors
[1] VBEsat decreases by about 1.7 mV/K with increasing temperature.
[2] VBE decreases by about 2 mV/K with increasing temperature.
[3] The smaller of the two values is taken as the numerator.
[4] The smaller of the two values is subtracted from the larger value.
VBE base-emitter voltage VCE =5V;
IC=2mA [2] 600 650 700 mV
VCE =5V;
IC=10 mA [2] --760 mV
Cccollector capacitance VCB =10 V;
IE=i
e=0A;
f=1MHz
- - 2.2 pF
Ceemitter capacitance VEB =0.5 V;
IC=i
c=0A;
f=1MHz
-10-pF
fTtransition frequency VCE =5V;
IC=10 mA;
f = 100 MHz
100 175 - MHz
NF noise figure VCE =5V;
IC=0.2 mA;
RS=2k;
f = 10 Hz to
15.7 kHz
- 1.6 - dB
VCE =5V;
IC=0.2 mA;
RS=2k;
f = 1 kHz;
B = 200 Hz
- 3.1 - dB
Per device
hFE1/hFE2 hFE matching VCE =5V;
IC=2mA [3] 0.9 1 -
VBE1VBE2 VBE matching VCE =5V;
IC=2mA [4] --2mV
Table 8. Characteristics
…continued
T
amb
=25
°
C unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
© Nexperia B.V. 2017. All rights reserved
BCM856BS_BCM856DS_1
Product data sheet Rev. 01 — 7 August 2008 6 of 14
Nexperia BCM856BS; BCM856DS
PNP/PNP matched double transistors
Tamb =25°CV
CE =5V
(1) Tamb = 100 °C
(2) Tamb =25°C
(3) Tamb =55 °C
Fig 1. Collector current as a function of
collector-emitter voltage; typical values Fig 2. DC current gain as a function of collector
current; typical values
IC/IB=20
(1) Tamb =55 °C
(2) Tamb =25°C
(3) Tamb = 100 °C
IC/IB=20
(1) Tamb = 100 °C
(2) Tamb =25°C
(3) Tamb =55 °C
Fig 3. Base-emitter saturation voltage as a function
of collector current; typical values Fig 4. Collector-emitter saturation voltage as a
function of collector current; typical values
006aaa540
VCE (V)
0108462
0.08
0.12
0.04
0.16
0.20
IC
(A)
0
0.25
IB (mA) = 2.5
0.5
0.75
1.0
1.25
1.5
1.75
2.0
2.25
006aaa541
200
400
600
hFE
0
IC (mA)
102103
102
101101
(1)
(2)
(3)
006aaa542
IC (mA)
101103
102
110
0.5
0.9
1.3
0.3
0.7
1.1
VBEsat
(V)
0.1
(1)
(2)
(3)
006aaa543
1
101
10
VCEsat
(V)
102
IC (mA)
101103
102
110
(1)
(2)
(3)
© Nexperia B.V. 2017. All rights reserved
BCM856BS_BCM856DS_1
Product data sheet Rev. 01 — 7 August 2008 7 of 14
Nexperia BCM856BS; BCM856DS
PNP/PNP matched double transistors
VCE =5 V; Tamb =25°CV
CE =5 V; Tamb =25°C
Fig 5. Base-emitter voltage as a function of collector
current; typical values Fig 6. Transition frequency as a function of collector
current; typical values
f = 1 MHz; Tamb =25°C f = 1 MHz; Tamb =25°C
Fig 7. Collector capacitance as a function of
collector-base voltage; typical values Fig 8. Emitter capacitance as a function of
emitter-base voltage; typical values
006aaa544
0.6
0.8
1
VBE
(V)
0.4
IC (mA)
101103
102
110 IC (mA)
1102
10
006aaa545
102
103
fT
(MHz)
10
VCB (V)
0108462
006aaa546
4
2
6
8
Cc
(pF)
0
006aaa547
VEB (V)
0642
9
11
7
13
15
Ce
(pF)
5
© Nexperia B.V. 2017. All rights reserved
BCM856BS_BCM856DS_1
Product data sheet Rev. 01 — 7 August 2008 8 of 14
Nexperia BCM856BS; BCM856DS
PNP/PNP matched double transistors
8. Application information
9. Test information
9.1 Quality information
This product has been qualified in accordance with the Automotive Electronics Council
(AEC) standard
Q101 - Stress test qualification for discrete semiconductors
, and is
suitable for use in automotive applications.
10. Package outline
Fig 9. Current mirror Fig 10. Differential amplifier
006aaa524
VCC
lout
R1
TR2TR1
006aaa526
IN2IN1 TR2TR1
OUT2
V
V+
OUT1
Fig 11. Package outline SOT363 (SC-88) Fig 12. Package outline SOT457 (SC-74)
06-03-16Dimensions in mm
0.25
0.10
0.3
0.2
pin 1
index
1.3
0.65
2.2
2.0 1.35
1.15
2.2
1.8 1.1
0.8
0.45
0.15
132
465
04-11-08Dimensions in mm
3.0
2.5 1.7
1.3
3.1
2.7
pin 1 index
1.9
0.26
0.10
0.40
0.25
0.95
1.1
0.9
0.6
0.2
132
4
56
© Nexperia B.V. 2017. All rights reserved
BCM856BS_BCM856DS_1
Product data sheet Rev. 01 — 7 August 2008 9 of 14
Nexperia BCM856BS; BCM856DS
PNP/PNP matched double transistors
11. Packing information
[1] For further information and the availability of packing methods, see Section 15.
[2] T1: normal taping
[3] T2: reverse taping
12. Soldering
Table 9. Packing methods
The indicated -xxx are the last three digits of the 12NC ordering code.
[1]
Type number Package Description Packing quantity
3000 10000
BCM856BS SOT363 4 mm pitch, 8 mm tape and reel; T1 [2] -115 -135
4 mm pitch, 8 mm tape and reel; T2 [3] -125 -165
BCM856BS/DG SOT363 4 mm pitch, 8 mm tape and reel; T1 [2] -115 -135
4 mm pitch, 8 mm tape and reel; T2 [3] -125 -165
BCM856DS SOT457 4 mm pitch, 8 mm tape and reel; T1 [2] -115 -135
4 mm pitch, 8 mm tape and reel; T2 [3] -125 -165
BCM856DS/DG SOT457 4 mm pitch, 8 mm tape and reel; T1 [2] -115 -135
4 mm pitch, 8 mm tape and reel; T2 [3] -125 -165
Fig 13. Reflow soldering footprint SOT363 (SC-88)
solder lands
solder resist
occupied area
solder paste
sot363_fr
2.65
2.35 0.4 (2×)
0.6
(2×)
0.5
(4×)
0.5
(4×)
0.6
(4×)
0.6
(4×)
1.5
1.8
Dimensions in mm
© Nexperia B.V. 2017. All rights reserved
BCM856BS_BCM856DS_1
Product data sheet Rev. 01 — 7 August 2008 10 of 14
Nexperia BCM856BS; BCM856DS
PNP/PNP matched double transistors
Fig 14. Wave soldering footprint SOT363 (SC-88)
Fig 15. Reflow soldering footprint SOT457 (SC-74)
sot363_fw
solder lands
solder resist
occupied area
preferred transport
direction during soldering
5.3
1.3 1.3
1.5
0.3
1.5
4.5
2.45
2.5
Dimensions in mm
solder lands
solder resist
occupied area
solder paste
sot457_fr
3.45
1.95
2.8253.3
0.45
(6×)0.55
(6×)
0.7
(6×)
0.8
(6×)2.4
0.95
0.95
Dimensions in mm
© Nexperia B.V. 2017. All rights reserved
BCM856BS_BCM856DS_1
Product data sheet Rev. 01 — 7 August 2008 11 of 14
Nexperia BCM856BS; BCM856DS
PNP/PNP matched double transistors
Fig 16. Wave soldering footprint SOT457 (SC-74)
sot457_fw
5.3
5.05
1.45
(6×)
0.45
(2×)
1.5
(4×)
2.85
1.475
1.475 solder lands
solder resist
occupied area
preferred transport
direction during soldering
Dimensions in mm
© Nexperia B.V. 2017. All rights reserved
BCM856BS_BCM856DS_1
Product data sheet Rev. 01 — 7 August 2008 12 of 14
Nexperia BCM856BS; BCM856DS
PNP/PNP matched double transistors
13. Revision history
Table 10. Revision history
Document ID Release date Data sheet status Change notice Supersedes
BCM856BS_BCM856DS_1 20080807 Product data sheet - -
© Nexperia B.V. 2017. All rights reserved
BCM856BS_BCM856DS_1
Product data sheet Rev. 01 — 7 August 2008 13 of 14
Nexperia BCM856BS; BCM856DS
PNP/PNP matched double transistors
14. Legal information
14.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nexperia.com.
14.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
14.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable.However,Nexperiadoesnotgiveanyrepresentationsor
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes — Nexperiareservestherighttomake
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — Nexperia products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of a Nexperia product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. Nexperia accepts no liability for inclusion and/or use of
Nexperia products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — Nexperia products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nexperia.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by Nexperia. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
14.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
15. Contact information
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product development.
Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.
© Nexperia B.V. 2017. All rights reserved
Nexperia BCM856BS; BCM856DS
PNP/PNP matched double transistors
16. Contents
1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description. . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.4 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2
4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
6 Thermal characteristics. . . . . . . . . . . . . . . . . . . 4
7 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 4
8 Application information. . . . . . . . . . . . . . . . . . . 8
9 Test information. . . . . . . . . . . . . . . . . . . . . . . . . 8
9.1 Quality information . . . . . . . . . . . . . . . . . . . . . . 8
10 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8
11 Packing information. . . . . . . . . . . . . . . . . . . . . . 9
12 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
13 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 12
14 Legal information. . . . . . . . . . . . . . . . . . . . . . . 13
14.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 13
14.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
14.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
14.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
15 Contact information. . . . . . . . . . . . . . . . . . . . . 13
16 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
© Nexperia B.V. 2017. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release:
07 August 2008