1 of 5 041002
FEATURES
§ Automatically restarts microprocessor after
power failure
§ Maintains reset for 350 ms after VCC returns
to an in-tolerance condition
§ Accurate 5%, 10% or 15% microprocessor 5V
power supply monitoring
§ Reduces need for discrete components
§ Precision temperature-compensated voltage
reference and voltage sensor
§ Low-cost TO-92 package or surface mount
SOT-223 package
§ Internal 5 kW pull-up resistor
§ Compatible with Motorola 68XXX series and
HC16 Microprocessors
§ Operating temperature of -40°C to +85°C
PIN ASSIGNMENT
PIN DESCRIPTION
PIN 1 GROUND
PIN 2 RESET
PIN 3 VCC
PIN 4 GROUND (SOT-223 ONLY)
DESCRIPTION
The DS1233D EconoReset uses a precision temperature-compensated reference and comparator circuit to
monitor the status of the power supply (VCC). When an out-of-tolerance condition is detected, an internal
power-fail signal is generated which forces reset to the active state. When VCC returns to an in-tolerance
condition, the reset signal is kept in the active state for approximately 350 ms to allow the power supply
and processor to stabilize.
OPERATION - POWER MONITOR
The DS1233D provides the functions of detecting out-of-tolerance power supply conditions and warning
a processor-based system of impending power failure. When VCC is detected as out of tolerance as
defined by the tolerance of the part selected, the RST signal is asserted. On power-up, RST is kept active
for approximately 350 ms after the power supply has reached the selected tolerance. This allows the
power supply and microprocessor to stabilize before RST is released.
DS1233D
5V EconoReset
www.maxim-ic.com
1 2 3
1 2 3
BOTTOM VIEW
TO-92 PACKAGE
See Mech.
Drawings Section
On Website
2
3
4
TOP VIEW
SOT-23 PACKAGE
See Mech.
Drawings Section
On Website
1
DALLAS
DS1233
Econo
Reset
DS1233D
2 of 5
BLOCK DIAGRAM Figure 1
APPLICATION EXAMPLE Figure 2
DS1233D
3 of 5
POWER UP Figure 3
POWER DOWN Figure 4
DS1233D
4 of 5
ABSOLUTE MAXIMUM RATINGS*
Voltage on VCC Pin Relative to Ground -0.5V to +7.0V
Voltage on I/O Relative to Ground -0.5V to VCC +0.5V
Operating Temperature -40°C to +85°C
Storage Temperature -55°C to +125°C
Soldering Temperature 260°C for 10 seconds
* This is a stress rating only and functional operation of the device at these or any other conditions
above those indicated in the operation sections of this specification is not implied. Exposure to
absolute maximum rating conditions for extended periods of time may affect reliability.
RECOMMENDED DC OPERATING CONDITIONS (-40°C to +85°C)
PARAMETER SYMBOL MIN TYP MAX UNITS NOTES
Supply Voltage VCC 1.2 5.0 5.5 V 1
DC ELECTRICAL CHARACTERISTICS (-40°C to +85°C; VDD=5V ± 10%)
PARAMETER SYMBOL MIN TYP MAX UNITS NOTES
Low Level @ RST VOL 0.4 V 1
Output Current @ 0.4V IOL +8 mA 2
Operating Current ICC 50 mA
VCC Trip Point 5% VCCTP1 4.5 4.625 4.74 V 1
VCC Trip Point 10% VCCTP2 4.25 4.375 4.49 V 1
VCC Trip Point 15% VCCTP3 4.0 4.125 4.24 V 1
Output Capacitance COUT 10 pF
Internal Pull-Up Resistor RP3.75 5 6.25 kW
AC ELECTRICAL CHARACTERISTICS (-40°C to +85°C; VCC=5V ± 10%)
PARAMETER SYMBOL MIN TYP MAX UNITS NOTES
Reset Active Time tRST 250 350 450 ms
VCC Detect to RST tRPD 100 ns
VCC Slew Rate (4.75V - 4.00V) tF300 ms
VCC Slew Rate (4.00V - 4.75V) tR0ns
VCC Detect to RST tRPU 250 350 450 ms
NOTES:
1. All voltages are referenced to ground.
2. A 1 kW external resistor may be required for proper operation of the microprocessor reset control
circuit.
DS1233D
5 of 5
ECONORESET SELECTION GUIDE
VCC TRIP POINT PUSHBUTTON DETECT
MIN TYP MAX MIN TYP MAX
DS1233-15 4.0 4.125 4.24 2.4 - 3.3
DS1233-10 4.25 4.375 4.49 2.4 - 3.3
DS1233-5 4.5 4.625 4.75 2.4 - 3.3
DS1233D-15 4.0 4.125 4.24 N/A N/A
DS1233D-10 4.25 4.375 4.49 N/A N/A
DS1233D-5 4.5 4.625 4.75 N/A N/A
DS1833-15 4.0 4.125 4.24 N/A N/A
DS1833-10 4.25 4.375 4.49 N/A N/A
5V
DS1833-5 4.5 4.625 4.75 N/A N/A
DS1233A-15 2.64 2.72 2.80 1.8 - 3.0
3.3V
DS1233A-10 2.8 2.88 2.97 1.8 - 3.0
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Maxim Integrated:
DS1233D-10+ DS1233D-15+ DS1233D-5+ DS1233DZ-10+ DS1233DZ-15+ DS1233DZ-5+ DS1233D-10
DS1233D-10+T&R DS1233D-15 DS1233D-15+T&R DS1233D-5 DS1233D-5+T&R DS1233DZ-10 DS1233DZ-
10+T&R DS1233DZ-10/T&R DS1233DZ-15 DS1233DZ-15+T&R DS1233DZ-15/T&R DS1233DZ-5 DS1233DZ-
5+T&R DS1233DZ-5/T&R
