Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FK
– EEE-37 –
A±0.2
W
()Reference size
L
φD±0.5
H
B±0.2
(I)
K
(P) (I)
+
–
0.3 max.
Pressure Relief (φ10 and larger)
22
FKj
Capacitance (µF)
Rated voltage Mark
Series identification
Lot number
Negative polarity
marking (–)
Mark for Lead-Free
Products Black Dot
(Square)
■Features
● Endurance: 2000 h at 105 °C
● Low impedance (40 % to 60 % less than FC series)
Miniaturized (30 % to 50 % less than FC series)
● Vibration-proof product is available upon request. (φ8 mm and larger)
● RoHS directive compliant
Surface Mount Type
Series: FK Type: V
FK High temperature Lead-Free refl ow(suffi x:A✽)
■Specifi cations
Category Temp. Range –55 °C to +105 °C
Rated W.V.Range 6.3 V.DC to 35 V.DC
Nominal Cap.Range 4.7 µF to 1500 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
tan δPlease see the attached High temperature lead-free refl ow products list.
Characteristics
at Low Temperature
W.V. (V) 6.3 10 16 25 35
(Impedance ratio at 120 Hz)
Z(–25 °C)/Z(+20 °C) 22222
Z(–40 °C)/Z(+20 °C) 33333
Z(–55 °C)/Z(+20 °C) 44433
Endurance
After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C,
Capacitors shall meet the following limits.
Capacitance change ±30 % of initial measured value
tan δ< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Resistance to
Soldering Heat
After refl ow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan δ< initial specifi ed value
DC leakage current < initial specifi ed value
Example:6.3 V 22 µF
Marking color : BLACK
Size
code DL
A, B
H
IWPK
B 4.0 5.8±0.3 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35 - 0.20
C 5.0 5.8±0.3 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35 - 0.20
D 6.3 5.8±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 - 0.20
D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 - 0.20
E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35 - 0.20
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.20
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.20
+ 0.15
+ 0.15
+ 0.15
+ 0.15
+ 0.15
■Di men sions in mm (not to scale) ■Marking
Cap (µF) Frequency (Hz)
120 1 k 10 k 100 k to
4.7 to 470 0.65 0.85 0.95 1.00
680 to 1500 0.70 0.90 0.95 1.00
■Frequency correction factor for ripple current
j 6.3 V
A 10 V
C 16 V
Rated Voltage Mark
E 25 V
V 35 V
(Unit : mm)
01 Feb. 2013
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FK
– EEE-38 –
■High temperature Lead-Free refl ow
W.V. Cap.
(±20 %)
Case size Specifi cation
Part No.
(RoHS:compliant) Refl ow
Min.
Packaging Q'ty
Dia. Length ✽Size
Code
Ripple
Current
(100 kHz)
(+105 °C)
Impedance
(100 kHz)
(+20 °C)
tan δ
(120 Hz)
(+20 °C)
Taping
(V) (µF) (mm) (mm)
(mA r.m.s.)
(액)(pcs)
6.3
22 45.8B901.350.26
EEEFK0J220AR (5) 2000
47 4 5.8 (B) 90 1.35 0.26 EEEFKJ470UAR (5) 2000
5 5.8 C 160 0.70 0.26 EEEFK0J470AR (5) 1000
100 5 5.8 (C) 160 0.70 0.26 EEEFKJ101UAR (5) 1000
6.3 5.8 D 240 0.36 0.26 EEEFK0J101AP (5) 1000
220 6.3 5.8 D 240 0.36 0.26 EEEFK0J221AP (5) 1000
330 6.3 7.7 D8 280 0.34 0.26 EEEFKJ331XAP (5) 900
8 6.2 E 300 0.26 0.26 EEEFK0J331AP (6) 1000
470 8 10.2F 6000.160.26
EEEFK0J471AP (6) 500
1000 8 10.2F6000.160.26
EEEFK0J102AP (6) 500
1500 10 10.2 G 850 0.08 0.26 EEEFK0J152AP (6) 500
10
22 45.8B901.350.19
EEEFK1A220AR (5) 2000
33 4 5.8 (B) 90 1.35 0.19 EEEFKA330UAR (5) 2000
5 5.8 C 160 0.70 0.19 EEEFK1A330AR (5) 1000
150 6.3 5.8 D 240 0.36 0.19 EEEFK1A151AP (5) 1000
220 6.3 7.7 D8 280 0.34 0.19 EEEFKA221XAP (5) 900
8 6.2 E 300 0.26 0.19 EEEFK1A221AP (6) 1000
330 8 10.2F 6000.160.19
EEEFK1A331AP (6) 500
470 8 10.2F 6000.160.19
EEEFK1A471AP (6) 500
680 8 10.2F6000.160.19
EEEFK1A681AP (6) 500
1000 10 10.2 G 850 0.08 0.19 EEEFK1A102AP (6) 500
16
10 45.8B901.350.16
EEEFK1C100AR (5) 2000
22 4 5.8 (B) 90 1.35 0.16 EEEFKC220UAR (5) 2000
5 5.8 C 160 0.70 0.16 EEEFK1C220AR (5) 1000
47 5 5.8 (C) 160 0.70 0.16 EEEFKC470UAR (5) 1000
6.3 5.8 D 240 0.36 0.16 EEEFK1C470AP (5) 1000
68 6.3 5.8 D 240 0.36 0.16 EEEFK1C680AP (5) 1000
100 6.3 5.8 D 240 0.36 0.16 EEEFK1C101AP (5) 1000
150 6.3 7.7 D8 280 0.34 0.16 EEEFKC151XAP (5) 900
220 6.3 7.7 D8 280 0.34 0.16 EEEFKC221XAP (5) 900
8 6.2 E 300 0.26 0.16 EEEFK1C221AP (6) 1000
330 8 10.2F 6000.160.16
EEEFK1C331AP (6) 500
470 8 10.2F 6000.160.16
EEEFK1C471AP (6) 500
680 10 10.2 G 850 0.08 0.16 EEEFK1C681AP (6) 500
25
10 45.8B901.350.14
EEEFK1E100AR (5) 2000
22 5 5.8 C 160 0.70 0.14 EEEFK1E220AR (5) 1000
33 5 5.8 (C) 160 0.70 0.14 EEEFKE330UAR (5) 1000
6.3 5.8 D 240 0.36 0.14 EEEFK1E330AP (5) 1000
47 6.3 5.8 D 240 0.36 0.14 EEEFK1E470AP (5) 1000
68 6.3 5.8 D 240 0.36 0.14 EEEFK1E680AP (5) 1000
100 6.3 7.7 D8 280 0.34 0.14 EEEFKE101XAP (5) 900
8 6.2 E 300 0.26 0.14 EEEFK1E101AP (6) 1000
150 8 10.2F6000.160.14
EEEFK1E151AP (6) 500
220 8 10.2F6000.160.14
EEEFK1E221AP (6) 500
330 8 10.2F 6000.160.14
EEEFK1E331AP (6) 500
470 10 10.2 G 850 0.08 0.14 EEEFK1E471AP (6) 500
35
4.7 4 5.8 B 90 1.35 0.12 EEEFK1V4R7AR (5) 2000
10 4 5.8 (B) 90 1.35 0.12 EEEFKV100UAR (5) 2000
5 5.8 C 160 0.70 0.12 EEEFK1V100AR (5) 1000
22 5 5.8 C 160 0.70 0.12 EEEFK1V220AR (5) 1000
33 6.3 5.8 D 240 0.36 0.12 EEEFK1V330AP (5) 1000
47 6.3 5.8 D 240 0.36 0.12 EEEFK1V470AP (5) 1000
68 6.3 7.7 D8 280 0.34 0.12 EEEFKV680XAP (5) 900
100 6.3 7.7 D8 280 0.34 0.12 EEEFKV101XAP (5) 900
8 10.2 F 600 0.160.12
EEEFK1V101AP (6) 500
150 8 10.2F6000.160.12
EEEFK1V151AP (6) 500
220 8 10.2F6000.160.12
EEEFK1V221AP (6) 500
330 10 10.2 G 850 0.08 0.12 EEEFK1V331AP (6) 500
✽Size code( ):Miniaturization product
If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J씮J, 1A씮A, 1C씮C, 1E씮E, 1V씮V
· Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Endurance : 105 °C 2000 h
01 Feb. 2013
