SAC8.0/1 - Vishay Semiconductors

SAC5.0 thru SAC50

www.vishay.com Vishay General Semiconductor

Revision: 16-Jan-18 1Document Number: 88379

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Low Capacitance TRANSZORB® Transient Voltage Suppressors

FEATURES

• Glass passivated chip junction

• 500 W peak pulse power capability with a

10/1000 μs waveform, repetitive rate (duty

cycle): 0.01 %

• Excellent clamping capability

• Very fast response time

• Low incremental surge resistance

• Solder dip 275 °C max. 10 s, per JESD 22-B106

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS

Use in sensitive electronics protection against voltage

transients induced by inductive load switching and lighting

on ICs, MOSFET, signal lines of sensor units for consumer,

computer, industrial, and telecommunication.

MECHANICAL DATA

Case: DO-15 (DO-204AC)

Molded epoxy over passivated body

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS-compliant and commercial grade

Terminals: matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3 suffix meets JESD 201 class 1A whisker test

Polarity: color band denotes cathode end

Note

(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2

PRIMARY CHARACTERISTICS

VWM 5.0 V to 50 V

VBR 7.6 V to 55.5 V

PPPM 500 W

PD3.0 W

TJ max. 175 °C

Polarity Uni-directional

Package DO-15 (DO-204AC)

DO-15 (DO-204AC)

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL VALUE UNIT

Peak pulse power dissipation with a 10/1000 μs waveform (1) PPPM 500 W

Peak pulse current with a 10/1000 μs waveform (fig. 3) (1) I

PPM See next table A

Power dissipation on infinite heatsink at TL = 75 °C (fig. 2) PD3.0 W

Operating junction and storage temperature range TJ, TSTG -55 to +175 °C

SAC5.0 thru SAC50

www.vishay.com Vishay General Semiconductor

Revision: 16-Jan-18 2Document Number: 88379

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2

RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)

Fig. 1 - Peak Pulse Power Rating Curve Fig. 2 - Power Derating Curve

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PART

NUMBER

BREAKDOWN

VOLTAGE

= 1.0 mA

(V)

STAND-OFF

VOLTAGE

(1)

(V)

MAXIMUM

REVERSE

LEAKAGE

(μA)

MAXIMUM

CLAMPING

VOLTAGE

= 5.0 A

(V)

MAXIMUM

PEAK

PULSE

CURRENT

PER FIG. 3

(A)

MAXIMUM

JUNCTION

CAPACITANCE

AT 0 V

(

WORKING

INVERSE

BLOCKING

VOLTAGE

WIB

(V)

INVERSE

BLOCKING

LEAKAGE

CURRENT

VWIB IIB (mA)

PEAK

INVERSE

BLOCKING

VOLTAGE

PIB

(V)

MIN.

SAC5.0 7.60 5 300 10.0 44 50 75 1.0 100

SAC6.0 7.90 6 300 11.2 41 50 75 1.0 100

SAC7.0 8.33 7 300 12.6 38 50 75 1.0 100

SAC8.0 8.89 8 100 13.4 36 50 75 1.0 100

SAC8.5 9.44 8.5 50 14.0 34 50 75 1.0 100

SAC10 11.10 10 5.0 16.3 29 50 75 1.0 100

SAC12 13.30 12 5.0 19.0 25 50 75 1.0 100

SAC15 16.70 15 5.0 23.6 20 50 75 1.0 100

SAC18 20.00 18 5.0 28.8 15 50 75 1.0 100

SAC22 24.40 22 5.0 35.4 14 50 75 1.0 100

SAC26 28.90 26 5.0 42.3 11.1 50 75 1.0 100

SAC30 33.30 30 5.0 48.6 10.0 50 75 1.0 100

SAC36 40.00 36 5.0 60.0 8.6 50 75 1.0 100

SAC45 50.00 45 5.0 77.0 6.8 50 150 1.0 200

SAC50 55.50 50 5.0 88.0 5.8 50 150 1.0 200

ORDERING INFORMATION (Example)

PREFERRED PIN UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

SAC5.0-E3/54 0.432 54 4000 13" diameter paper tape and reel

td - Pulse Width

100

0.1

PPM

- Peak Pulse Power (kW)

0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms

Non-Repetitive Pulse

Waveform shown in Fig. 3

TA = 25 °C

Current Waveforms

PPK

“0.5”

Impulse

Exponential

Decay

PPK

td = 7 tp

Half Sine

PPK Square

L = 0.375" (9.5 mm)

Lead Lengths

- Lead Temperature (°C)

100

0 50 100 150 175

Peak Power (Single Pulse)

TJ = Initial Temperature

Power Dissipation

Percentage of Rated Power (%)

25 75 125

SAC5.0 thru SAC50

www.vishay.com Vishay General Semiconductor

Revision: 16-Jan-18 3Document Number: 88379

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 3 - Pulse Waveform Fig. 4 - AC Line Protection Application

SCHEMATIC

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

t - Time (ms)

150

0 2.0 4.0

PPM

- Peak Pulse Current, % I

RSM

100

1.0 3.0

Peak Value

IPPM

10/1000 µs Waveform

as defined by R.E.A.

Half Value -

IPPM

IPP

TJ = 25 °C

Pulse Width (td)

is defined as the Point

where the Peak Current

decays to 50 % of IPPM

tr = 10 µs

Low Capacitance

TVS

Application Note: Device must be used with

two units in parallel, opposite in polarity as

shown in circuit for AC signal line protection.

Diode

Transient

Voltage

Suppressor

DO-15 (DO-204AC)

0.034 (0.86)

0.028 (0.71)

DIA.

0.140 (3.6)

0.104 (2.6)

DIA.

1.0 (25.4)

MIN.

0.300 (7.6)

0.230 (5.8)

1.0 (25.4)

MIN.

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Mouser Electronics
  
Authorized Distributor
 
  
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
 
 
 
 Vishay:   
  SAC10/23  SAC10/4  SAC10/54  SAC10-E3/23  SAC10-E3/4  SAC10-E3/51  SAC10-E3/54  SAC10-E3/73  SAC12/4 
SAC12/54  SAC12-E3/4  SAC12-E3/51  SAC12-E3/54  SAC12-E3/73  SAC15/23  SAC15/4  SAC15/54  SAC15-E3/23 
SAC15-E3/4  SAC15-E3/51  SAC15-E3/54  SAC15-E3/73  SAC18/4  SAC18/54  SAC18-E3/4  SAC18-E3/51  SAC18-
E3/54  SAC18-E3/73  SAC22/4  SAC22/54  SAC22-E3/4  SAC22-E3/51  SAC22-E3/54  SAC22-E3/73  SAC26/4 
SAC26/54  SAC26-E3/4  SAC26-E3/51  SAC26-E3/54  SAC26-E3/73  SAC30/4  SAC30/54  SAC30-E3/23  SAC30-
E3/4  SAC30-E3/51  SAC30-E3/54  SAC30-E3/73  SAC36/4  SAC36/54  SAC36-E3/4  SAC36-E3/51  SAC36-E3/54 
SAC36-E3/73  SAC45/4  SAC45/54  SAC45-E3/23  SAC45-E3/4  SAC45-E3/51  SAC45-E3/54  SAC45-E3/73 
SAC5.0/23  SAC5.0/4  SAC5.0/54  SAC5.0-E3/23  SAC5.0-E3/4  SAC5.0-E3/51  SAC5.0-E3/54  SAC5.0-E3/73 
SAC50/4  SAC50/54  SAC50-E3/4  SAC50-E3/51  SAC50-E3/54  SAC50-E3/73  SAC6.0/23  SAC6.0/4  SAC6.0/54 
SAC6.0-E3/23  SAC6.0-E3/4  SAC6.0-E3/51  SAC6.0-E3/54  SAC6.0-E3/73  SAC7.0/4  SAC7.0/54  SAC7.0-E3/4 
SAC7.0-E3/51  SAC7.0-E3/54  SAC7.0-E3/73  SAC8.0/4  SAC8.0/54  SAC8.0-E3/4  SAC8.0-E3/51  SAC8.0-E3/54 
SAC8.0-E3/73  SAC8.5/4  SAC8.5/54  SAC8.5-E3/4  SAC8.5-E3/51  SAC8.5-E3/54  SAC8.5-E3/73