NE5532, NE5532A
DUAL LOW-NOISE OPERATIONAL AMPLIFIERS
SLOS075C – NOVEMBER 1979 – REVISED JUNE 2000
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
D
Equivalent Input Noise Voltage
5 nV/√Hz Typ at 1 kHz
D
Unity-Gain Bandwidth . . . 10 MHz Typ
D
Common-Mode Rejection
Ratio . . . 100 dB Typ
D
High dc Voltage Gain . . . 100 V/mV Typ
D
Peak-to-Peak Output Voltage Swing
32 VTyp With VCC± = ±18 V and RL = 600 Ω
D
High Slew Rate ...9 V/µs Typ
D
Wide Supply Voltage Range . . . ±3 V to
±20 V
D
Designed to Be Interchangeable With
Signetics NE5532 and NE5532A
D
Package Options Include Plastic
Small-Outline (PS) Package and Standard
Plastic (P) DIP
description
The NE5532 and NE5532A are high-performance operational amplifiers combining excellent dc and ac
characteristics. They feature very low noise, high output-drive capability, high unity-gain and
maximum-output-swing bandwidths, low distortion, high slew rate, input-protection diodes, and output
short-circuit protection. These operational amplifiers are compensated internally for unity-gain operation. The
NE5532A has specified maximum limits for equivalent input noise voltage.
The NE5532 and NE5532A are characterized for operation from 0°C to 70°C.
AVAILABLE OPTIONS
PACKAGED DEVICES
TAPLASTIC
DUAL-IN-LINE
(P)
PLASTIC
SMALL-OUTLINE
(PS)
0
°
Cto70
°
C
NE5532P NE5532PS
0°C
to
70°C
NE5532AP NE5532APS
The PS package is available taped and reeled. Add the suffix
R to the device type (e.g., NE5532PSR).
symbol (each amplifier)
IN+
IN– OUT
+
–
Copyright 2000, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
2
3
4
8
7
6
5
OUT
IN–
IN+
VCC–
VCC+
OUT
IN–
IN+
P OR PS PACKAGE
(TOP VIEW)
NE5532, NE5532A
DUAL LOW-NOISE OPERATIONAL AMPLIFIERS
SLOS075C – NOVEMBER 1979 – REVISED JUNE 2000
2POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
schematic (each amplifier)
OUT
VCC–
VCC+
36 pF
37 pF
14 pF
7 pF
15 Ω
460 Ω
15 Ω
IN+
IN–
Component values shown are nominal.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, VCC+ (see Note 1) 22 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supply voltage, VCC– (see Note 1) –22 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage, either input (see Notes 1 and 2) VCC±
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input current (see Note 3) ±10 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Duration of output short circuit (see Note 4) Unlimited. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Package thermal impedance, θJA (see Note 5): P package 85°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PS package 95°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, Tstg –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC–.
2. The magnitude of the input voltage must never exceed the magnitude of the supply voltage.
3. Excessive input current will flow if a differential input voltage in excess of approximately 0.6 V is applied between the inputs unless
some limiting resistance is used.
4. The output may be shorted to ground or either power supply. Temperature and/or supply voltages must be limited to ensure the
maximum dissipation rating is not exceeded.
5. The package thermal impedance is calculated in accordance with JESD 51.
NE5532, NE5532A
DUAL LOW-NOISE OPERATIONAL AMPLIFIERS
SLOS075C – NOVEMBER 1979 – REVISED JUNE 2000
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
recommended operating conditions
MIN NOM MAX UNIT
Supply voltage, VCC+ 5 15 V
Supply voltage, VCC– –5 –15 V
Operating free-air temperature 0 70 °C
electrical characteristics, VCC± = +15 V, TA = 25°C (unless otherwise noted)
PARAMETER TEST CONDITIONS†MIN TYP MAX UNIT
VIO
In
p
ut offset voltage
VO=0
TA = 25°C 0.5 4
mV
V
IO
Inp
u
t
offset
v
oltage
V
O =
0
TA = 0°C to 70°C 5
mV
IIO
In
p
ut offset current
TA = 25°C 10 150
nA
I
IO
Inp
u
t
offset
c
u
rrent
TA = 0°C to 70°C 200
nA
IIB
In
p
ut bias current
TA = 25°C 200 800
nA
I
IB
Inp
u
t
bias
c
u
rrent
TA = 0°C to 70°C 1000
nA
VICR Common-mode input-voltage range ±12 ±13 V
VOPP
Maximum peak-to-peak
RL≥600 Ω
VCC± = ±15 V 24 26
V
VOPP
output-voltage swing
RL
≥
600
Ω
VCC± = ±18 V 30 32
V
R
L
≥ 600 Ω,TA = 25°C 15 50
AVD
Large-signal
L,
VO = ±10 V TA = 0°C to 70°C 10
V/mV
A
VD
gg
differential-voltage amplification R
L
≥ 2 kΩ,TA = 25°C 25 100
V/mV
L,
VO = ±10 V TA = 0°C to 70°C 15
Avd Small-signal
differential-voltage amplification f = 10 kHz 2.2 V/mV
BOM
Maximum out
p
ut swing bandwidth
RL = 600 Ω, VO = ±10 V 140
kHz
B
OM
Ma
x
im
u
m
-
o
u
tp
u
t
-
s
w
ing
band
w
idth
VCC± = ±18 V, VO = ±14 V 100
kH
z
B1Unity-gain bandwidth RL = 600 Ω, CL = 100 pF 10 MHz
riInput resistance 30 300 kΩ
zoOutput impedance AVD = 30 dB, RL = 600 Ω,f = 10 kHz 0.3 Ω
CMRR Common-mode rejection ratio VIC = VICR min 70 100 dB
kSVR Supply voltage rejection ratio
(∆VCC±/∆VIO)VCC± = ±9 V to ±15 V, VO = 0 80 100 dB
IOS Output short-circuit current 10 38 60 mA
ICC Total supply curent VO = 0, No load 8 16 mA
Crosstalk attenuation (VO1/VO2)V01 = 10 V
peak, f = 1 kHz 110 dB
†All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified.
NE5532, NE5532A
DUAL LOW-NOISE OPERATIONAL AMPLIFIERS
SLOS075C – NOVEMBER 1979 – REVISED JUNE 2000
4POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
operating characteristics, VCC± = ±15 V, TA = 25°C
PARAMETER
TEST CONDITIONS
NE5532 NE5532A
UNIT
PARAMETER
TEST
CONDITIONS
MIN TYP MAX MIN TYP MAX
UNIT
SR Slew rate at unity gain 9 9 V/µs
Overshoot factor VI = 100 mV,
RL = 600 Ω,AVD = 1,
CL = 100 pF 10% 10%
V
p
f = 30 Hz 8 8 10
nV/√Hz
V
n
u
v
u
v
f = 1 kHz 5 5 6 n
V/√H
z
I
p
f = 30 Hz 2.7 2.7 p
A/√Hz
I
n
u
v
u
u
f = 1 kHz 0.7 0.7
pA/√Hz
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty . Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
Customers are responsible for their applications using TI components.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 2000, Texas Instruments Incorporated