Scotch®
High-temperature Masking Tape
214
Product Description Scotch®High-temperature Masking Tape 214 is good for one hour at 350°F (177°C)
on most surfaces. The adhesive is sulfur-free which makes it one of the few tapes
that can be used on copper, silver and other precious metals.
Typical Physical
Properties
Technical Data February, 2011
ASTM Test Method
Adhesion to Steel: 29 oz./in. width (32 N/100 mm) D-3330
Tensile Strength: 27 lbs./in. width (480 N/100 mm) D-3759
Elongation at Break: 10% D-3759
Tape Thickness: 5.8 mils (.147 mm) D-3652
Temperature Use Range: Up to 350°F (177°C)
Product Construction Backing Adhesive Standard Roll Length
Smooth crepe paper treated Firm rubber adhesive designed 60 yds. (54.8 m)
with a high heat and stain to give outstanding holding power
resistant saturant for a high heat resistant tape
Features • Has excellent stain resistance.
• Adhesive is very firm and allows it to be used on most treated metals.
• Scotch®Tape 214 complements Scotch®Tape 213 in high temperature masking
tape usage and should be evaluated at the same time.
• Will generally withstand bake cycles up to 350°F (177°C) for one hour – even
on treated metals. Performance is governed by total time, temperature, surface
tape is applied to, and any other coatings and conditions.
• Should not be subjected to outdoor exposure or prolonged periods of sunlight
exposure as tape may become very difficult to remove.
Note: The following technical information and data should be considered representative
or typical only and should not be used for specification purposes.
Application Ideas • Can be used in a wide variety of high heat, treated metal, and stain resistant
applications. It is generally considered only when one of these factors is a problem.
Scotch®High-temperatur e Masking Tape
214
Storage Store under normal conditions of 70°F (21°C) and 50% R.H. in the original carton.
Shelf Life To obtain best performance, use this product within one year from date of
manufacture.
The technical information, recommendations and other statements contained in this document are
based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such
information is not guaranteed.
Technical Information
Unless an additional warranty is specifically stated on the applicable 3M product packaging or product
literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time
3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY
OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.
If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s
option, replacement of the 3M product or refund of the purchase price.
Warranty,
Limited Remedy,
and Disclaimer
Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted,
including warranty, contract, negligence or strict liability.
Limitation of Liability
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001:2008 standards.
ISO 9001:2008
Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use
and performance of a 3M product in a particular application. Given the variety of factors that can affect
the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and
determining whether it is fit for a particular purpose and suitable for user’s method of application.
Product Use
Scotch is a registered trademark of 3M.
Printed in U.S.A.
©3M 2011 70070945558 (2/11)
Recycled Paper
40% pre-consumer
10% post-consumer
Industrial Adhesives and Tapes Division
3M Center, Building 225-3S-06
St. Paul, MN 55144-1000
800-362-3550 • 877-369-2923 (Fax)
www.3M.com/industrial
